Hooker Furniture Square End Table 5751-80113-89 User manual

ASSEMBLY INSTRUCTION
Item#: 5751-80113-89 Square End Table
** Please make sure you have all parts indicated below prior to assembly.
This table is heavy and can best be assembled with the help of two persons.
1/2
Diagram 1

2/2
Assembly Steps:
1. Put table top upside down on a soft surface to prevent it from being scratched (See diagram
1).
2. Follow numbers on legs and corner blocks. Attach legs (I) to table top by using bolts (A),lock
washers (B), flat washers (C),and tighten all with large allen wrench (D) in clockwise direction.
(See diagram 1)
.
3.Well place bottom shelf (J) onto notched legs (I) in place .Use bolts (E),lock washers (F), flat
washers (G) and tighten all with small allen wrench (H) in clockwise direction. (See diagram 1)
.
4.Turn table upright.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.