Hored R1 User manual

User Manual
Wireless Router - R1

1
User Manual Brief Introduction
Wireless Router R1 Product Specification> mainly introduces the
product, hardware connection, usage method and usage
suggestions of Hored R1 wireless router.
Chapter 1: Product Overview. Product characteristics, hardware and
software specifications and appearance.
Chapter 2: Hardware Connections. Refers to the connection
between the gateway and other devices.
Chapter 3: Product Guide, guides the operation of the gateway.
Chapter 4: Product Packaging and Use Recommendations.

2
R1 is a dual-band wireless router developed by Hored. It supports 2.4G and 5G
dual WiFi, wireless maximum speed up to 1200Mbps. With independent wireless
PA, the wireless coverage without dead angle. Full Gigabit Ethernet port, which is
more suitable for laying more than 200M fiber places.
1.1 Features：
Qualcomm chip, more stable and powerful performance
Qualcomm industrial grade chip, with 128M large RAM, can greatly improve the
network data processing rate, video/ games will not stuck.
Dual-band WiFi to achieve faster internet surfing
Support 2.4G and 5G dual WiFi to work at the same time, wireless maximum speed
up to 1200Mbps. 2.4G WIFI with large coverage, 5G WIFI with high-speed data
transmission, wireless surfing will be more smoother.
Full Gigabit Ethernet port
5 full Gigabit Ethernet ports, breaking through the traditional
Chapter1: Product Overview

3
Megabyte limitation, to get faster Internet access.
Independent PA, External high gain antenna
Independent wireless PA with high-gain antenna, easily to cover
100 ㎡rooms
Support 30 devices online at the same time
With the latest MU-MIMO technology and unique multi-capacity
access technology, 30 devices can be securely connected to the
Internet at the same time.

4
1.2Product specifications
Hardware Specification
CPU
Qualcomm high performance chip,
frequency 775MHz
Flash
16MB
RAM
128MB DDR
Ethernet
QCA8337
WAN:1*10/100/1000Mbps Adaptive
LAN:4*10/100/1000Mbps Adaptive
WiFi chip
2.4GHz：QCA9563
2x2 MIMO IEEE802.11b/g/n
2.4GHz(300Mbps)20dBm
5GHz：QCA9886
2x2 MIMO IEEE802.11a/n/ac

5
5.8GHz(867Mbps)20dBm
WiFi Working
frequency
2.4GHz、5GHz，Support 5G in priority
Transmission
rate
Up to 1200Mbps
Wireless power
Maximum 20dBm
Antenna
3 external omnidirectional 5dBi rod
antennas
Buttons
RST button、Zigbee button
Receiving
sensitivity
Receive sensitivity up to -98dBm
Button
Reset button（Long press for 5~10 seconds
to restore the factory default
configuration.）
Dimension
220mm*145mm*30mm(Without height of
antenna)
Operating
temperature
Operating temperature：0°~40°C
Storage temperature：-40°~70°C

6
Working humidity：10%~ 90%,No
condensation
Power
Input：100-240V 50/60HZ
DC 12V/1A
Software specification
OS
Linux
External
network
access
1. PPPoE dialing;
2. Dynamic IP;
3. Static IP;
Performance
specification
Ensure 30 devices with stable Internet access
at the same time
Operating
mode
Wireless routing mode
AP mode
DHCP server
DHCP server
DHCP Client List
Routing
function
NAT Conversion
Network
features
1、DHCP Server;
2、Address management；
3、2.4G WIFI、5G WIFI；
4、WDS；
Safety
WPA/WPA2 hybrid encryption mode

7
1.3 Appearance
Appearance
Wireless encryption and activation
System
Management
1, Log statistics;
2,Backup and restore configuration;
3, local upgrade
4. Remote upgrade;

8
Indicators
Indicator lights：
Icon
Name
Status
Description
Power
Indicator
On
The device is normal / The device is turned on
Off
The adapter is not connected / The power
adapter is powered abnormally.
System
indicator
On
Device system normal
Off
Device system abnormal
Corresponding port is not connected /
connection is abnormal.

9
LAN port
1-4
Off
On
Corresponding device connection is normal
WANport(I
nternet
indicator)
On/Flas
hing
Internet access is normal
Off
Not connected to the WAN port or abnormal
Internet access
2.4G WiFi
On
2.4G WIFI working Normally
Off
2.4G WIFI is off or abnormal
5G WiFi
On
5G WIFI working Normally
Off
5G WIFI is off or abnormal
Bluetooth:
Reserved
Zigbee:
Reserved

10
Product connection diagram
Chapter 2. Hardware connection

11
Log in to the R1 Wireless Router Management page
1. After connecting to the router, enter the address:
192.168.108.1 to enter the management interface:
2. Enter the account number: admin, password: admin, to enter
the management interface
Chapter 3: Product Guide

12
Operation management page
1. System information
System Information: Overview Router Version Information and
LAN Port Status
2. wireless information
Basic settings: View and operate the basic settings of 2.4G, 5G WIFI

13
WDS：Wireless bridging allows the ZB100 to connect with other
wireless devices
3. LAN port settings
LAN port address: modify the router login address

14
DHCP server: Set to enable and disable the DHCP server to provide
IP addresses for internal network devices.
4. External network（WAN）
Internet settings: set the WAN uplink type to achieve Internet
access

15
5. System Management
System Settings: Reset Router Login Password
Operation mode: Set the routing mode and AP mode of the
wireless router.
Routing mode: In this mode, the ZB100 shares the wireless network
to the LAN client and device through networking. At this time, the
NAT, firewall and DHCP server are enabled by default.
AP mode: In this mode, the ZB100 connects to the wireless device
through the Ethernet port to extend the coverage of the wireless
signal. At this time, the firewall, IP sharing, and NAT are disabled.

16
Firmware upgrade: Complete the router firmware upgrade by
uploading the version file

17
Restore/Export/Upload Settings: Complete the upload and export
of settings, and restore the factory default configuration
1） System record
General log file: export/view of system log files

18
Wireless users: View basic information about wireless users
DHCP lease: View the MAC, IP, and lease time of the device

19
Routing table: View the specific routing status