HORI Nintendo Switch User manual

Thank you for purchasing this product. Before using
this product please read the instructions carefully.
After reading the instruction manual, please keep it for reference.
Instruction Manual
・Make sure that your Nintendo Switch™ is updated to the latest system firmware.
・
This product only works in Handheld Mode and must be attached to the
Nintendo Switch™ console to function. This product cannot be used in
TV Mode or Tabletop Mode, or as a wireless controller.
・
This product cannot be used with certain accessories made speciically for
Joy-Con™ controllers (such as the Joy-Con Grip and Joy-Con Charging Grip)
due to this product’s shape and size. Please do not forcibly install this
product into any accessories as malfunction or damage may occur.
EN
・This product does not support the following features.
Gyroscope, Motion IR Camera, Accelerometer, Player LED, HD Rumble,
HOME Button Notification LED, NFC
Before using this product
· This product contains small parts. Keep away from children under 3 years old.
· Do not use this product if damaged or modiied.
· Do not get this product wet. This may cause an electric shock or malfunction.
· Do not place this product near heat sources or leave under direct sunlight. Overheating may
cause malfunction.
· Do not apply strong impact or weight on the product.
· Never disassemble, repair or modify this product.
· If the product needs cleaning, use only a soft dry cloth. Do not use any chemical agents like
benzene or thinner.
· Do not use this product for anything other than its intended purpose. We are not responsible
for any accidents or damages in the event of use other than the intended purpose.
Warning
Caution To Parent/Guardian, Please read carefully
2033-33U

Included
Nintendo Switch™
Layout
ZR Button
FR Button
Left Stick
/ L Stick Button
Capture Button
TURBO Button(L)
ASSIGN Button(L)
TURBO LED(L)
ASSIGN LED(L)
TURBO Button(R)
ASSIGN Button(R)
TURBO LED(R)
ASSIGN LED(R)
HOME Button
Right Stick
/ R Stick Button
B Button
A Button
X Button
Y Button
- Button
+ Button
L Button
ZL Button
FL Button
R Button
Control Pad
Release ButtonRelease Button
Controller (L) x 1 Controller(R) x 1 Instruction manual x 1
Platform
Front
Back

Release Button
Slide this product from top to
bottom along the rails of the
Nintendo Switch™ console
until you hear a click.
Be careful not to move the
analog sticks when installing.
How to Remove
Hold the Release Button
on the back of the product
while sliding product from
bottom to the top.
If the controller is not functioning properly, remove controller from the
Nintendo Switch™ console and reattach it.
If the analog sticks is not responding correctly, please rotate
the analog sticks two or three times in large circles to
calibrate. The process above will only work when this
product is attached to the Nintendo Switch™ console and
the power supply is on.
This product is not compatible with the "Calibrate Control
Sticks" option in the Nintendo Switch™ HOME Menu.
How to Connect

TURBO Button
TURBO Button
The Turbo hold function allows continuous rapid ire without having to hold the button.
(Pressing the assigned button deactivates this).
* Control Pad (UP, DOWN, LEFT or RIGHT) is not compatible with the Turbo hold mode,
and can only be used to set Turbo mode.
The following buttons can be set to Turbo or Turbo hold mode:
L Button / ZL Button / L Stick Button / FLButton
Control Pad (UP / DOWN / LEFT / RIGHT)
How to use the Turbo Functions
+
TURBO Button
+
TURBO Button
Turbo OFF
TURBO LEDHow to assign
Turbo Mode
OFF
(All buttons)
Hold down the Turbo button and
then press the button that you
want to set to Turbo mode.
+
TURBO Button
Turbo Hold
Press the button once more,
and the button will remain
in Turbo (Turbo Hold).
Pressing the button again
once more will deactivate
the Turbo function.
Hold the TURBO Button and
press the -(+)Button. OFF
OFF
Button OFF
TURBO LED will lash.
Button ON
TURBO LED will turn on.
Button OFF
TURBO LED will turn on.
Button ON
TURBO LED will lash.
+
TURBO Button
-
(+)Button
In the case that after deactivating the turbo
function, the TURBO LED does not turn off,
this means that there is still a button set to
Turbo/Turbo Hold.
※
If you forget which buttons you have set to
Turbo mode, deactivate them all and reassign,
as you require.
※
How to change Turbo Speed
+
+
R Button / ZR ButtonR / R Stick Button / FRButton
A Button / B Button / X Button / Y Button
Controller(L) Controller(R)
You can adjust the Turbo mode to 3 different speeds.
Use the left analog stick to adjust the Controller (L) button turbo speed,
and use the right analog stick to adjust the Controller (R) button turbo speed.
While pressing the Turbo Button, push up on the analog sticks
to change the Turbo speed in the following order :
5 times/second → 10 times/second → 20 times/second
While pressing the Turbo Button, push down on the analog sticks
to change the Turbo speed in the following order :
20 times/second → 10 times/second → 5 times/second
* Turbo speed is set to 10 times/second by default.
* Analog Sticks must be returned to the neutral position before changing to the next turbo speed.

Dimensions (approx) : (W)65mm × (H)110mm × (D)28mm
Weight (approx) : 80g
+
+
Turns On
OFF
FR Button
ASSIGN Button
ASSIGN Button
FL Button
FL/FR Button
You can assign the Controller (L) button function to the FL Button, or assign the Controller (R) button
function to the FR Button.
Assignable Button Functions
Hold down the Assign button and press the button you
want to assign to the FL (or FR) Button together.
Hold down the Assign Button and then press the
FL (or FR ) Button together.
When the software has a button conigration option:
A To assign the Controller (L) button function to the FR Button, set the Controller (R) button (R / ZR / R stick /
A / B / X / Y) to the Controller (L) button (L / ZL / L stick / Control Pad (UP / DOWN / LEFT / RIGHT)).
B To assign the Controller (R) button function to the FL Button, set the Controller (L) button (L / ZL /L stick /
Control Pad (UP / DOWN / LEFT / RIGHT) to the Controller (R) button (R / ZR / R stick / A / B / X / Y ).
L Button / ZL Button /L Stick Button
Control Pad (UP / DOWN / LEFT / RIGHT)
Assign Mode
ASSIGN LEDHow to assign
Assign ON
Assign OFF
Specifications
R Button / ZR Button / R Stick Button
A Button / B Button / X Button / Y Button

The normal function of the product may be disturbed by strong electro-magnetic interference.
If so, simply reset the product to resume normal operation by following the instruction manual (How to connect).
In case the function does not resume, please relocate to an area which does not have electro-magnetic
interference to use the product.
US
EU
Warranty
HORI warrants to the original purchaser that the product purchased new in its original packaging shall be
free of any defects in material and workmanship for a period of 90 days from the original date of purchase. I
f the warranty claim cannot be processed through the original retailer please address directly to HORI at infous
@hori.jp. Please visit http://stores.horiusa.com/policies/ for warranty details.
Warranty
For all warranty claims made within the irst 30 days after purchase, please check with the retailer where
the original purchase was made for details. If the warranty claim cannot be processed through
the original retailer or for any other inquiries pertaining to our products, please address directly to HORI at [email protected].
Please retain contact information for future reference.
The image on the package may differ from the actual product.
The manufacturer reserves the right to change the product design or speciications without notice.
The packaging must be retained since it contains important information.
HORI & HORI logo are registered trademarks of HORI.
Nintendo SwitchTM is a trademark of Nintendo. © 2019 Nintendo. Licensed by Nintendo.
PRODUCT DISPOSAL INFORMATION
Where you see this symbol on any of our electrical products or packaging, it indicates that the relevant
electrical product or battery should not be disposed of as general household waste in Europe. To ensure
the correct waste treatment of the product and battery, please dispose of them in accordance with
any applicable local laws or requirements for disposal of electrical equipment or batteries. In so doing,
you will help to conserve natural resources and improve standards of environmental protection in
treatment and disposal of electrical waste. Applicable to EU countries and Turkey only.
THE FCC WANTS YOU TO KNOW
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Simpliied Declaration of Conformity
Hereby, HORI declares that this product is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
https://hori.co.uk/consumer-information/
For UK: Hereby, HORI declares that this product is in compliance with the relevant statutory requirements.
The full text of the declaration of conformity is available at the following internet address:
https://hori.co.uk/consumer-information/