HORI Xbox Series X|S User manual

Caution
Instruction Manual
Thank you for purchasing this product.
Before using this product please read the instructions carefully.
After reading the instruction manual, please keep it for reference.
● This product contains small parts. Keep away from children under 3 years old.
● Keep this product away from small children or infants. Seek medical attention immediately if any small parts are swallowed.
● Long cord. Strangulation hazard.
● Keep the controller away from dusty or humid areas.
● Do not use this product if it has been damaged or modified.
● Do not get this product wet. This may cause an electric shock or malfunction.
● Do not place this product near heat source or leave under direct sunlight for an extended period.
Overheating may cause malfunction.
● Do not touch the metal parts of the USB plug.
● Do not apply strong impact or weight on the product.
● Do not pull roughly or bend the cable of the controller.
● Do not disassemble, modify or attempt to repair this product.
● If product needs cleaning, use only a soft dry cloth. Do not use any chemical agents like benzene or thinner.
● Do not use this product for anything other than its intended purpose.
We are not responsible for any accidents or damages in the event of use other than the intended purpose.
Included
Platform
Controller
Xbox Series X|S / Xbox One / Windows 10
* Functions as PC controller through XInput.
This product does not support DirectInput.
USB Port, Internet ConnectionSystem requirements
Caution Parents/Guardians:
Please read the following information carefully.
Important
Before using this product with the Xbox Series X|S / Xbox One system,please read the included
instructions carefully.
Please check that your Xbox Series X|S / Xbox One is updated to the latest system firmware.
This product is designed for the Xbox Series X|S, but it can also be used with the
Xbox One and Windows 10 by following the instructions in this manual.

Layout
How to Connect
* Do not press on any buttons when connecting the USB cable.
* Check the connector direction before inserting.
LT Button
LB Button
RT Button
RB Button
Left Stick
(LSB Button)
View Button
Menu Button
Xbox® Guide button
YButton
BButton
AButton
XButton
Right Stick
(RSB Button)
Share Button
Status LED
USB Connector
Quick Release
Controller Cable
Mic On/Off Button
Mic LED
Directional Pad
Profile LED
Profile Button Audio Control Button
Headphone/Mic Jack
Quick Release
Your controller cord has a quick release.This is a safety feature designed to reduce the chance of the
Xbox Series X|S console or computer from falling when the cord is pulled.
If the console or computer falls and hits someone, especially a small child, it could cause a serious injury.
To reduce the risk of injuries or damage to the console or computer, it is important to use the controller and
the quick release properly. Use the controller connector, not the quick release, to routinely connect and
disconnect the controller. If the quick release disconnects, simply reconnect it by aligning the grooved
indentations and pressing the two parts completely together. The controller will not work unless the quick release
is connected properly. Never tape, glue, or otherwise prevent the quick release from pulling apart.
The quick release reduces, but does not eliminate, the risk of the computer or console being pulled off its surface.
To further reduce the risk:
• Do not allow anyone to pull on the controller or controller cord in a way that causes the computer or console
to move.
• Do not allow controller cords to become crossed or tangled with one another.
Connect to the USB port of the Xbox Series X|S console.

Main Features
Download App
The following features can be adjusted in the app:
■Assign Mode
■Analog Stick
■Trigger (LT/RT)
■Vibration
■Audio Settings
■Profile
『HORI Device Manager for Xbox Series X』
<How to Download>
① Search for "HORI" on the Microsoft Store.
② Install the "HORI Device Manager for
Xbox Series X" App.
●About Profile
The Profile Button is used to toggle between profiles
(profiles are adjusted via the HORI Device Manager
for Xbox Series X).
Profile Set Profile LED
1Green
2Red
3Blue
4White
The Profile LED will change based on Profile setting.
Profile Button
Profiles will switch when the Profile Button is pressed.
Mic Control
The headset's Mic ON/OFF and Input Sensitivity can be adjusted.
You will hear a 'beep' when the mic is set to the MAX or MIN volume.
Audio Controls
Adjusting Headset Volume Adjusting Game Audio / Voice Chat Balance
Directional Pad
Directional Pad
Directional Pad
Directional Pad
While pressing
＋
Audio Control
Button
Increase volume
While pressing
＋
Audio Control
Button
Decrease volume While pressing
＋
Audio Control
Button
Increase voice chat volume
While pressing
＋
Audio Control
Button
Increase in-game volume
Push
Mic On/Off Button
Push
Mic On/Off Button
Mic LED Off
Mic On/Off
While pressing
＋
Mic On/Off Button
Increase
Mic Input Sensitivity
Directional Pad
While pressing
＋
Mic On/Off Button
Decrease
Mic Input Sensitivity
Directional Pad
Mic Input Sensitivity Adjustment
Mic Input
On
Mic Input
Off
Mic LED On
The Volume and Mixer can be adjusted.
You will hear a 'beep' when the audio is set to the MAX or MIN volume.
External Dimensions ︓ 155×109×62mm
Weight ︓ 250ｇ
Cable Length ︓3.0ｍ

Ages 6+
● The image on the package may differ from the actual product.
● The manufacturer reserves the right to change the product design or specifications without notice.
● Microsoft, Xbox, Xbox "Sphere" Design, Xbox Series X|S, Xbox One, Windows are trademarks of the Microsoft group of companies.
● HORI & HORI logo are registered trademarks of HORI.
THE FCC WANTS YOU TO KNOW
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
EU and Turkey only
PRODUCT DISPOSAL INFORMATION
Where you see this symbol on any of our electrical products or packaging, it indicates that the
relevant electrical product or battery should not be disposed of as general household waste in
Europe. To ensure the correct waste treatment of the product and battery, please dispose of them
in accordance with any applicable local laws or requirements for disposal of electrical equipment
or batteries. In so doing, you will help to conserve natural resources and improve standards of
environmental protection in treatment and disposal of electrical waste. Applicable to EU countries
and Turkey only.
The normal function of the product may be disturbed by strong electro-magnetic interference. If so, simply reset the product
to resume normal operation by following the instruction manual (How to connect). In case the function does not resume,
please relocate to an area which does not have electro-magnetic interference to use the product.
US
Warranty
HORI warrants to the original purchaser that the product purchased new in its original packaging shall be free of any defects
in material and workmanship for a period of 90 days from the original date of purchase. If the warranty claim cannot be
processed through the original retailer please contact HORI customer support directly at [email protected]. Please visit
http://stores.horiusa.com/policies/ for warranty details.
EU
Warranty
For all warranty claims made within the first 30 days after purchase, please check with the retailer where the original
purchase was made for details. If the warranty claim cannot be processed through the original retailer or for any other
inquiries pertaining to our products, please contact HORI customer support directly at [email protected].
The wires are not to be inserted into socket-outlets.
The packaging must be retained since it contains important information.
MADE IN CHINA