Horiba Scientific LAQUA DS-71 Installation guide

SET
MEASCAL
MODE
DATA
COND METER DS-71
January, 2017 © 2017 HORIBA Advanced Techno Co., Ltd.
SET
MEASCAL
MODE
DATA
COND METER DS-71
Preparation
Quick Manual
COND meter DS-71
①Connect the electrode to the COND meter
Electrode terminal Temperature sensor terminal
②Press the power button of the COND meter
☆Press the power button for 2 seconds.
※Wait for 10 seconds after connecting
the AC adapter before pressing
the power button.
CODE :GZ0000272696A

3552-10D
1.065 × 100 m -1（1cm-1)
Example.)
SET
MEASCAL
MODE
DATA
COND METER DS-71
SET
MEASCAL
MODE
DATA
COND METER DS-71
×5
② ①
SET
MEASCAL
MODE
DATA
COND METER DS-71
SET
MEASCAL
MODE
DATA
COND METER DS-71
SET
MEASCAL
MODE
DATA
COND METER DS-71
SET
MEASCAL
MODE
DATA
COND METER DS-71
SET
MEASCAL
MODE
DATA
COND METER DS-71
Set the cell constant
①Enter the set up mode
To measurement
②Set the cell constant
Check the label on the electrode.
Measurement
①Enter the measurement mode
②Start the measurement
When the indication changes from
the blinking state to the lit state,
measurement is complete.
① Press button
and set the digit
number of cell
constant.
Register it with
button.
Change the digit
with buttons.
② Press button
and set the number
of cell constant.
Register it with
button.