㪚㪦㪛㪜㪑㩷㪞㪱㪐㪈㪇㪇㪉㪉㪏㪉㪋㪌㪛㩷
Thank you for your purchasing a HORIBA DO tip. Read this manual carefully before
using the tip.
Precautions on handling
ƔBe careful not to scratch membrane.
DO tip is covered with extremely thin fragile membrane. Do not damage it by
hitting or pushing DO tip strongly.
ƔEnsure complete waterproofing.
DO tip mounted on sensor body is designed to prevent infiltration of sample by
means of O-ring.
ƔDo not touch the inner solution.
The inner solution is strongly alkaline. If it sticks to your cloth or skin, wash it away
with water sufficiently. The cornea of an eye is weak to alkali. Do not to allow any
droplet of inner solution to contact eyes in particular.
Storage
ƔConnect the short socket before storage.
When storage of independent DO tip is intended, remove DO tip from DO
electrode body.
Be sure to connect DO tip to the short socket, and store it in a cool dark place.
Mounting procedure
Instruction Manual
for DO Tip 7541 㽲Take a DO tip out of a pack.
The pack has a notch at its edge.
Tear the pack from there, and take
out DO tip.
㽳Disconnect the short socket.
O-ring
Short socket
DO tip
㽴Attach DO tip to DO electrode body.
DO tip Electrode body
Keep the short socket after detaching it from DO tip; you will need it for
storing DO tip afterwards.
Distributed by: ABQ Industrial LP USA
Tel: +1 (281) 516-9292 / (888) 275-5772 eFax: +1 (866) 234-0451
Distributed by: ABQ Industrial LP USA
Tel: +1 (281) 516-9292 / (888) 275-5772 eFax: +1 (866) 234-0451
