HORNER Hazardous Location Series User manual
LMAN0070-01-EN
Hazardous Location Series
07/29/20 Page 1
ETG-HLB
HazLoc Low Bay User Manual
GENERAL SAFETY INFORMATION
electric shock, falling parts, cuts/abrasions and other hazards, please read
• DO NOT INSTALL DAMAGED PRODUCT!
WARNING
RISK OF ELECTRICAL SHOCK
CAUTION
RISK OF INJURY
• Account for small parts and destroy packing material, as these may
CAUTION
RISK OF FIRE
LMAN0070-01-EN
Hazardous Location Series
07/29/20 Page 2
GENERAL WIRING DIAGRAM
• CAUTION:
All units must be individually connected
Black = Line
White = Neutral
Green = Ground
INSTALLATION & OPERATION
Electrical Connec�on:
Black wiring connects to Line
White wiring connects to Neutral
Green wiring connects to Ground
Type of Installa�on
standard op�onal
LED Driver
BLACK (LINE)
GREEN (GROUND)
WHITE (NEUTRAL)
AC INPUT
( - ) ( + )
LEAN WIRES
TO LED LOAD
Terminal
Block
07/29/20 Pag
LMAN0070-01-EN
Hazardous Location Series
Installa�on:
Pendant
U Bracket
bracket to the wall
the luminaire with torque value 5 N-m,
Step 1
Step 2
Step 3
Step 1
Step 2
Step 3
LMAN0070-01-EN
Hazardous Location Series
07/29/20 Pag
Ceiling
bracket to the ceiling
cover to the bracket
cover, and connect the wires
Stanchion 25º / Stanchion 90º
the luminaire with torque value 5 N-m
Wall 25º / Wall 90º
bracket to the wall
the driver cavity cover to the bracket with
the luminaire with torque value 5 N-m
Step 1 Step 2
Step 3 Step 4
Step 1
Step 2
Step 3
Step 4
Step 1 Step 2
Step 3
Step 4
Step 5
LMAN0070-01-EN
Hazardous Location Series
07/29/20 Page 5
Wiring Installa�on
• Reorient or relocate the receiving antenna
Figure A
07/29/20 Page 6
TECHNICAL SUPPORT
Tel: 317 916-4274 Fax:: 317 639-4279
Web: http://www.hornerlighting.com Email: techsppt@HornerETG.com
LMAN0070-01-EN
Hazardous Location Series
SERVICING
• To avoid personal injury, disconnect power to the light and allow the unit to cool down before
HOUSING
This manual suits for next models
1
Table of contents
Other HORNER Light Fixture manuals
