Hotone Cybery User manual

www.hotoneaudio.com
Specifications
Number of Footswitch es: 6
Number of Loops: 4 (isol ated)
Bypass mode: Relay True B ypass or Ana log Buffer Bypass
Buffer Bypass Input impedan ce: 1M Ohms
Buffer Bypass Output impeda nce: 100 Ohms
Power Requirement: 9 V DC center n egative
Current Consumptio n: Max. 200 mA
Dimensions: 403mm( D)×56mm(W )×48mm(H)
Weight: 575g
Get Hooked Up
Meet your cyber matrix c ontroll er. Cybery is a compact but versatile pedal man ager that h elps you keep everything in order. Four
true bypass loops guar antee a pri stine signal, programmable MIDI lends yo u massive control, and a free mobile app sets you free
from complex and annoy ing hardw are programming.
Features
Compact size, rock solid alumin um casing
4 independent relay- based True B ypass audio loops
Programmable MIDI co ntrol (se nding PC and CC messages)
for commanding pedal s, multi- effects, mobile apps, and more
®
Built-in Bluetooth module for wireless pr ogrammi ng and control
Switchable high qual ity input b uffer for preventing high frequency loss
Mute/Tuner function wit h indepen dent tuner output
SW A/B function for amp channel swit ching
2 switching modes:
- Direct mode for instant access
- Preset mode with 40 prog rammabl e presets for different combinations
Low switching noise
9V DC power supply
®
*Bluet ooth Smart is a t rade mar k owne d by the Blue toot h SIG , Inc.
Thi s tradema rk was u sed m erel y to identi fy a functi onal c haracte ristic of t he pro duct.

Panel Introduction
12 13
14 15
16
10
11
986
7
5
4
3
2-digit LED screen: Indicates current mode or bank/patch number.
Footswitch 1-6: Programmable footswitches with halo LEDs, for switching loops on/off,
switching banks/patches, and more.
Note: for more details, please check Modes section.
INPUT: 1/4" (6.35mm) mono input jack, connect instruments or pedal outputs.
TUNER: 1/4" (6.35mm) mono output jack, connect your tuner.
SEND: 1/4" (6.35mm) mono jack, connect to your effect input jack.
RETURN: 1/4" (6.35mm) mono jack, connect to your effect output jack.
LOOP 1/2/3/4 LEDs: Indicates on/off status for loops 1/2/3/4.
A/B: 1/4" (6.35mm) TRS jack, for switching A/B channels on your amp head. Connect to
your amp footswitch jack. A cable with 1/4" (6.35mm) TRS jacks on both ends is required.
OUTPUT: 1/4" (6.35mm) mono output jack, connect to amp or other pedal input.
1
2
3
4
5
6
7
8
9
BUFFER switch: Switches internal buffer on/off. If you’re suffering from
signal loss caused by a long signal chain, turning on the buffer will help.
Turn it off if you want to keep your signal pristine and when using pedals
that don’t work well with buffers.
BUFFER LED: Indicates internal buffer on/off status.
MIDI IN: Standard 5-pin MIDI input jack, for receiving MIDI info.
MIDI OUT/THRU: 5-pin MIDI output jack, for sending MIDI info.
USB: USB type B jack, for USB MIDI control.
®
BLUETOOTH LED: Indicates built-in Bluetooth module working status.
DC 9V: Plug in 9V DC adapter (center negative).
16
15
14
13
12
11
10
Modes
Cybery features two di ffere nt modes: Direct mode and Preset mode. The Default mode i s Direct Mo de.
Direct Mode is used for in stant acc ess to individual pedal loops, control swi tches, an d MIDI CC codes. In this mode, the 2-digit LED
screen will show “dr”wh en poweri ng up and then will show two dashes.
The default footswit ch settin gs in this mode (no MIDI message included):
Footswitch 1-4: Swit ches Loop 1 -4 on/off (green LED)
Footswitch 5: Switch A/ B functio n (yellow LED - channel A, blue LED – channel B)
Footswitch 6: Mute/Tune r functio n (red LED)
Jump Right In!
1. Launch the App Store (iO S) or Play St ore (Android) and search “Cybery”,
or simply scan the QR code s below:
2. Download and launch y our app.
3. Get your gear ready (ch eck the “Co nnections” section).
4. Turn on your Cybery and th e Bluetoo th switch on your smart device.
5. Pair your Cybery with y our smart d evice.
6. Edit, save all change s, and ROCK O UT!
Note: Want a quick start? Eve ry new Cybe ry is loaded with a preset
so you can jump right in – Check the “Mod es” section below.
Connections FOOTSW ITCH JACK
OR
Preset Mode is used to cre ate, reca ll, and edit presets which include multipl e loops on/off status, MIDI CC or PC codes, A/B channel
switching status and e ngaging m ute/tuner function. Cybery has 10 user ban ks (A-J), e ach bank has 4 presets (1-4). In this mode, the
2-digit LED screen wil l show “PS” w hen powering up and then turn to indicate the cu rrent bank/patch number.
BANK NU MBER PATCH N UMBER
The default footswit ch settin gs in this mode (no MIDI message included):
Footswitch 1-4: Sele cts from 4 di fferent patches from 1-4 (green LED)
Footswitch 5: Bank dow n (blue LED )
Footswitch 6: Bank up (r ed LED)
1
2
Switching Between Modes
You can use the matched app to swi tch between the two modes, but you can also switch using th e hardware method below:
1. Press and hold footswi tch 1 and 2 whi le plugging in the power jack.
2. Press footswitch 1 or 2 to select a mod e (footswitch 1 for Direct Mode, footswitch 2 for Prese t Mode). The LED screen will show yourcurrent select ion.
3. Press footswitch 1 and 2 a t the same ti me to confirm.
Factory Reset
The Factory Reset func tion will r estore your Cybery to its default settings. To rese t your Cybery, press and hold footswitch 2 and 3 while plu gging in th e
power jack. An “88” will ap pear on the L ED screen:
Press footswitch 2 and 3 a t the same ti me to confirm.
To cancel Factory Reset, u nplug the p ower jack or simply wait
for 5 seconds for the unit t o return to n ormal operation mode.
iOS And roid