6
Installation
Choosewhereyouwanttoinstall
yourdishwasher,youcanplaceit
sothatitssidesorbackpanelare
side by side with furniture or up
againstthewall.Thedishwasheris
providedwithwatersupplyanddrain
hoses, which can be directed
towardstheleftorrighttofacilitate
appropriateinstallation.
Levelling.
Oncetheapplianceispositioned,
adjustthefeetbyscrewingthemin
oroutdependingonhowhighyou
want it and to level it so that it is
horizontal.Makesurethatitisnot
inclinedmorethan2degrees.Ifthe
applianceislevel,itwill helpensure
itscorrectoperation.
Coldwaterconnection.
Connect the cold water supply
hose, and making sure that it is
fastened tightly in place . If the
waterhosesareneworhavebeen
outofuseforanextendedperiodof
time,letthewaterruntomakesure
it is clear and free of impurities
beforemakingtheconnection.Ifthis
precautionisnottaken,thewater
inlet could get blocked, causing
damagetoyourdishwasher.
Standpipe:
Ensurethatthehoseisnotpushed
toofardownthestandpipe.
Iftheendofyourdrainhoseisfitted
with‘retainingflaps’,ensuretheyare
insertedfullyintothestandpipe. This
willpreventthepipefromjumping
outduringinstallationanduse.
DO NOT position the standpipe
nearanelectricaloutlet.
ENSUREthatthedrainhoseisnot
kinkedanditisroutedasshownin
thediagram.
Thestandpipeshouldhaveabore
ofatleast38mm(11/2”).Itshould
beinstalledasshown,haveatrap
fittedandmustdischargeintothe
same drain system as your
householdsink.
It MUST NOT be connected to a
surfacewaterdrain.
SinkWasteSystem:
Forundersinkdrainage:
Beforeconnectingthedrainhose,
removeanyinternal restrictions-
Thiswillpreventabuildupofdebris
whichcouldcauseablockage.
Removeanyrestrictionsfromthe
wastespigotandensure thatthe
sealingbungisremoved.Thehose
should be routed, such that it is
raised to a minimum height of
800mm(31/2”).
NOTE:Ensurethesinkoutlet
pipehasaminimumdiamtereof
32mm.
1.UntietheendoftheGREY
drainagehosefromtherearofthe
appliance.
2.Repositionthe‘HookedEnd
Support’asrequiredalongthe
GREYdrainagehose.
3.Iffittinganundersinkwaste
disposalunit,cutoutthe
membrane,bungorblankingplug.
Ensurethedrainhoseis
securelyattached,topreventit
comingawaywhilethe
machineisinuseandcausing
aflood.
ConnecttotheWaterSupply...
-Foryourdishwasher tooperate
correctlyitrequireswaterpressures
in the range of 6-150 psi (100-
1000KPa).Mostcoldwatersupplies
willbeinthisrange.NOTE:lowwater
pressure will lead to excessively
longfilltimesornofill.
-Ensurethatthenewhosesupplied
is connected and the old hose is
disposedofsafely.
-Ensurethefillhoseisonlyfittedto
the cold water supply. DO NOT
overtighten the hose connector,
handtightissufficient.
-Ensurethefillhoseisnotkinked.
-Tapconnections(ifapplicable):A
rangeofadaptorsareavailableto
suityourtap.
-DONOTconnectthedishwasher
toasingleoutletinstantaneouswater
heateroranelectricheater.
Drainhoseconnection.
WARNING: Connect your
dishwasher drain hose to pipes
which connect to the foul drain
system and not to surface water
drains.
IMPORTANT: For the correct
operationofyourdishwasher,itis
essential to comply with the
followinginformation:
Rememberyou willbechargesforaservicecallisa problemwith
yourapplianceiscausedbyincorrectinstallationormisuse.