HP Chromebox G2 Assembly instructions

EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Other Products
Marketing Name / Model
[List multiple models if applicable.]
HP Chromebox G2
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
M/B, Power/B
2
Batteries
All types including standard alkaline and lithium
coin or button style batteries
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Power cord
1
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Components and waste containing asbestos

EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Description #1 Screw Driver
#1
Description #2
Description #3
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. remove bottom rubber cover foot x4, screw*4, and bottom cover sub-assy.
2. remove side cover screw*2, and side cover sub-assy.
3. remove bottom shielding screw*4, pull out DC cable, and bottom shielding sub-assy.
4. remove SSD screw*1, WLAN screw*1, pull out WLAN cable, and SSD/WLAN sub-assy.
5. remove DDR shielding can, and DDR RAM sub-assy.
6. remove MB screw*4, pull out power board cable, and MB sub-assy.
7. remove Top shielding screw*4, and Top shielding sub-assy.
8. remove power board screw*2, and power board sub-assy.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
3.21 Total part disassembly
3.22 Remove bottom cover rubber, bottom cover screw and disassembly

EL-MF877-00 Page 3
Template Revision B
PSG instructions for this template are available at EL-MF877-01
3.23 Remove side cover screw and disassembly
3.24 Remove bottom shielding screw and DC cable and disassembly

EL-MF877-00 Page 4
Template Revision B
PSG instructions for this template are available at EL-MF877-01
3.25 Remove SSD & WLAN all screw & WLAN cable and disassembly
3.26 Remove DDR shielding can and DDR RAM disassembly

EL-MF877-00 Page 5
Template Revision B
PSG instructions for this template are available at EL-MF877-01
3.27 Remove MB all screw & power board cable and disassembly
3.28 Remove top shielding all screw and disassembly

EL-MF877-00 Page 6
Template Revision B
PSG instructions for this template are available at EL-MF877-01
3.29 Remove power board all screw and disassembly