
Technical Specifications 
 
Model u626cn PJ504AA 
Processor & Speed 2.8 GHz/400 Intel®Pentium®4 Processor – PGA478 
Chipset Intel® 848P 
Motherboard Oxford-UL6E (4PSD-LA) 
RAM 256/3200 MB 400 DDR SDRAM (runs@266MHz) 
 Maximum 2 GB (2x1024MB DDR SDRAM) 
 Sockets Two 184-pin DDR DIMMs 
 Size 128, 256, 512 AND 1024 MB DDR DIMMs 
Free DIMM Sockets One 
 Pairs Required No 
 Type Supported JEDEC unbuffered DDR SDRAM DIMM specification 
Cache 8KB Data Cache + Trace Cache L1, 512 KB L2 Integrated 
on Processor module 
Hard Drive 80 GB (7200 RPM) 
Optical Drive CD-RW/DVD-ROM Drive 48x32x16x48 
48X- Write /32X - Re-write /16x- DVD Read 
48X - CD-ROM Read 
 Average Random Access DVD =115ms / CD-ROM =95ms 
 Transfer Rate DVD = 21.6/sec. / CD-ROM = 7.2MB/sec. 
Diskette Drive None 
9 in 1 Card Reader Compact Flash I/II, Memory Stick/PRO, MMC/SD, Smart 
Media, xD, Microdrive 
Fax/Data Modem V.92 56Kbps 
 Fax Speed Up to 14.4Kbps 
 Data Compression V.42 bis 
 Error Correction V .42 
 EIA Fax Commands Class 1 
Video Graphics AGP 8X Graphics Card 
 Controller nVidia FX5200XT 
 Video Memory 128 MB DDR, not upgradeable 
 Video Connectors Composite & S-Video - PAL 
Network Card 10/100 BaseT, Integrated 
1394 Card IEEE-1394, Integrated 
Sound AC’97, 6 Channel, Integrated on MB 
 Controller Realtek ALC650 
Chassis Panther-Lite, 250HV+PFC PSU 
USB Interface Specification USB 2.0 
External I/O Rear Connectors 4= USB, 1=1394, Serial, Parallel, 
Line-In, Line-Out; Microphone 
External I/O Front Connectors 2=USB; 1= 1394, Line In, Microphone, Headphone, 9 in 1 
Card Reader w/USB 
Expansion Slots (Total) 3= PCI, 1= AGP 
Expansion Slots (FREE) 2= PCI 
Drive Bays (Total) Two 5.25” external, One 3.5” external, 
 Two 3.5” internal 
Drive Bays (FREE) One 5.25” external, One 3.5” external, One 3.5” internal 
Keyboard/Mouse One-touch Enhanced Keyboard, PS/2 Optical scrolling 
mouse 
 
 Copyright Hewlett-Packard Co. 1994-2004 
This information is subject to change without notice and 
is provided "as is" with no warranty. 
Hewlett-Packard shall not be liable for any direct, 
indirect, special, incidental or consequential damages 
in connection with the use of this material.