HP SB360 - 12 MP, 3IN LCD User manual

HP CA350/CB350
Digital Camera
Quick Start Guide

1
For more details about the camera operation and troubleshooting, please
read the User Manual located on the CDROM disc included with your
camera or visit http://www.hp.com/support and download it for
the camera support page.

1
Getting Started
Inserting the Battery
Follow these instructions to insert the AA batteries into the battery
compartment. If batteries are already installed, make sure to power off camera
before inserting new batteries.
Make sure the power is off before inserting the batteries.1.
Open the battery compartment at the bottom of the camera.2.
Insert the batteries into the compartment with the terminal3.
facing inside the camera and the batteries indent next to the
compartment door.
SET
Close the battery4.
compartment.

2 3
Camera Views
-Front View
Flash
Self-Timer LED /
AF Assist Lamp
Zoom Lens
Microphone
-Back View
LCD screen
Zoom buttons
Menu button ٭4FUNC / Delete button ٭3
Play button ٭1
Operation Lamp
OK button / 4-way
navigation control Quick
Functions ٭2
# Please refer to the notes for marked item with ٭ at page 4

2 3
-Top View
Speaker
Stabilizer button
Shutter button
Power button
-Bottom View
Battery
compartment
SD card
compartment
-Left/Right View
Strap ring
USB

4 5
Button ٭1: Play
If the camera is turned off, press and hold to turn on camera in Playback
mode.
If the camera is turned on, press to toggle camera to Playback or Shooting
mode.
Button ٭2: FUNC/Delete
In Shooting mode, press to enter My Favor menu.
In Playback mode, press to delete an image, video or audio clip.
Button ٭3: Navigation Control
The 4-way Navigation Control and the OK button allows you to access
the various menus available from the On Screen Display (OSD). Further
functions of these buttons are as follows:
Face Tracking/
Rotate Button
Macro Button
OK Button
Flash Button
Display Button
Button ٭4: Menu button
Press Menu button on camera exits if you’ve navigated into mode settings
and don’t want to make a selection

4 5
Initial Settings
You will be prompted to set up the language and the date and time when the
camera is turned on for the rst time.
-Setting the Language
Press1. , , or to move through the selection.
Select a language, and then press OK to apply.2.
-Using Setup Menu
You can access the Setup menu whether you are in Shooting or Playback
mode. The Setup menu allows you to congure general camera settings.
To go to Setup Menu:
Press1.
MENU
to launch the Shooting/
Playback Menu.
Use the2. or key to change the
menu tab to Setup menu.
Use the3. or key to move
through the menu selections.
To select an item, press the OK button4.
or .
Camera Sounds
Auto Power Off
Display Timeout
Date & Time Imprint
Language
File Numbering
1min
OFF

6 7
Change the submenu settings using the 4-way navigation control.5.
Press the6. OK button to save and apply settings.
-Setting Battery Type
To ensure the camera displays the battery level correctly, be sure to set the
battery type in Setup Menu to match the installed battery type: Alkaline / NiMH
/ Lithium / Oxyride.
TV Configuration
D
Battery Type
Memory Kit
Reset All
NTSC
A lka
Alkaline
NiMH
Lithium
Oxyride
A lka
NiMH
Li
Oxy

6 7
Modes
Your camera has two modes:
-Shooting mode
Set to Shooting mode to capture images and record videos and audio•
clips.
Shooting mode can be further set to many options such as auto, video•
and scene selection. “Setting the Shooting Scene Mode on page 9”
below.
-Playback mode
Set your camera to Playback mode so you can view and edit captured•
images as well as playback videos and audio clips. You can also attach a
voice memo to any image in this mode.
Shooting mode is selected by default when using the Power button to turn on
the camera. When you turn on your camera using the Power button, it will
automatically set to shooting mode.
-Switching between Shooting mode and Playback Mode
In Shooting mode, press the Play button to switch to Playback mode.
In Playback mode, press the Play button to switch back to Shooting mode.

8 9
Using Shooting Functions
Shooting Menu
If you are in shooting mode, you can access the Shooting menu simply by
pressing the
MENU
button on your camera.
When the menu is displayed, use the 4-way navigation control and the OK
button to move through menu selections and apply your desired settings. To
close the menu anytime, press the menu button again.
The Shooting menu allows you to change modes, and setup other capture
settings.
Press1.
MENU
to launch the Shooting Menu.
Use the2. or key to move through
the menu selections.
To select an item, press3. .
Change the submenu settings using the4.
4-way navigation control.
Press the5. OK button to save and apply
settings.
OFF
OFF
Shooting Mode
Self-Timer/Burst
AEB
AF Area
AF Lamp
Sharpness