HP F5000-S User manual

Replacing a fan tray
1
The HP F5000-S/F5000-C Firewall uses the following fan tray. The fan tray has four fans.
, depending on the
ding on the CPU
The firewall can automatically adjust the speed of the two front fans
ambient temperature, and the speed of the two rear fans, depen
temperature.The firewall support hot swapping of the fan tray.
Fan tray overview
Tools required
ESD wrist strap Phillips screwdriver
Fan
Captive screw
Handle
Be aware of electrical hazards when replacing a fan tray on an operating firewall.
The fan tray is hot swappable. After you remove a fan tray
firewall, install a new one within 2 minutes to ensure correct he
firewall.
from an operating
at dissipation of the
Keep the removed fan tray that is not used immediately in an antistatic bag.

To find related documents, browse to the Manuals page of the HP Business Support
Center website:
http://www.hp.com/support/manuals
© Copyright 2013 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
5998-5096
Push the fan tray in the slot until it is firmly seated in the slot.
Fasten the captive screws on the fan tray.