HP ENVY x2 Detachable PC Assembly instructions

Product End-of-Life Disassembly Instructions
Product Category: Notebooks and Tablet PCs
Marketing Name / Model
[List multiple models if applicable.]
HP ENVY x2/HP ENVY x2 Detachable PC/HP ENVY x2 Detachable PC 13
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
2
Batteries
All types including standard alkaline and lithium coin
or button style batteries
1
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
1
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
0
External electrical cables and cords
1
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
Components, parts and materials containing
refractory ceramic fibers
0
EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01

Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Screwdriver #1
Electric cross
screwdriver
Description #2
Description #3
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Follow steps described in Disassembly instruction (file attached)
2. If parts can be removed without using a tool, remove it first
3. Use correct screwdriver and torque value before unlock the screw.
4.
5.
6.
7.
8.
9.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at EL-MF877-01

MANUFACTURING PROCESS INSTRUCTIONS
MECHANICAL ASSEMBLY
MODEL : Belvedere
Auditor ：Alicia Chien
Tabulator：
A. Current station version list
B. Version Modify list
Revision Date Station Content Ver. Design
0.1 2014/08/19 ALL FIRST VERSION 0.1 Kevin Lee
Sub-assembly name: FA DIS ASS‘Y
Document No.: Belvedere FA DIS ASS'Y SOP
Written by: Kevin Lee Revision: 0.1
Date: 2014/08/19 Page: 1
Station Ver. Station Ver. Station Ver. Station Ver.
10.1 10 0.1 19 0.1
20.1 11 0.1
30.1 12 0.1
40.1 13 0.1
50.1 14 0.1
60.1 15 0.1
70.1 16 0.1
80.1 17 0.1
90.1 18 0.1
Kevin Lee

Standard Operation Procedure
Document No. Belvedere FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-PPE
Auditor ：Kevin Lee
Rip Mylar and Decorator 2014/08/19
0.1
1. Rip the mylar (6054B1428401). (Fig.1)
2. Rip the decorator (6051B0936901). (Fig.2)
Fig.1
Fig.2
1(1/1)

Standard Operation Procedure
Document No. Belvedere FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-PPE
Auditor ：Kevin Lee
2(1/1)
2014/08/19
0.1
Loosen A-COVER Screws
Fig.1
1
2
1. Loosen screw M2*3 (60520D078405) * 2.
(Fig.1)
2. Loosen screw M1.6*2.5 (6052B0031301) * 2.
(Fig.1)
Electric cross screwdriver (#1) 1

Standard Operation Procedure
Document No. Belvedere FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-PPE
Auditor ：Kevin Lee
3(1/1)
2014/08/190.1
Loosen Stand Cover Screws
Fig.1
1. Loosen screw (60520D078405) * 4. (Fig.1)
2. Open stand cover, loosen M2*3 screw
(60520D078405) * 5. (Fig.2)
Electric cross screwdriver (#1) 1
Fig.2

Standard Operation Procedure
Document No. Belvedere FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-PPE
Auditor ：Kevin Lee
4(1/1)
2014/08/190.1
Disassemble Front Bezel and Rear Cover
Fig.1 1
2
1. Disassemble front bezel and rear cover.
Fig.2

Standard Operation Procedure
Document No. Belvedere FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-PPE
Auditor ：Kevin Lee
5(1/1)
2014/08/19
0.1
Disconnect Cable & Disassemble Speaker
Fig.1
1. Disconnect battery cable. (Fig.1)
2. Rip acid tape and take speakers module out.
(Fig.2)
2
Fig.2

Standard Operation Procedure
Document No. Belvedere FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-PPE
Auditor ：Kevin Lee
6(1/1)
2014/08/19
0.1
Disassemble Battery
1. Rip the copper foil * 2. (Fig.1)
2. Loosen battery module screw
(6052B0156101) * 7. (Fig.1)
3. Disassemble battery.
Electric cross screwdriver (#1) 1
Fig.1
1
2

Standard Operation Procedure
Document No. Belvedere FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-PPE
Auditor ：Kevin Lee
7(1/1)
2014/08/19
0.1
Disconnect Camera, W/L Cable
1
2
1. Disconnect camera, W/L cables. (Fig.1)
2. Rip the tape. (Fig.2)
Fig.1
1
2
Fig.2

Standard Operation Procedure
Document No. Belvedere FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-PPE
Auditor ：Kevin Lee
8(1/1)
2014/08/19
0.1
Disassemble Power/B
1. Disassemble power FFC. (Fig.1)
2. Loosen M2*3 screw (6052B0156101) * 1.
(Fig.1)
3. Disassemble Power/B.
Electric cross screwdriver (#1) 1
Fig.1
2

Standard Operation Procedure
Document No. Belvedere FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-PPE
Auditor ：Kevin Lee
9(1/1)
2014/08/19
0.1
Disassemble Volume/B
2
1. Disassemble volume FFC. (Fig.1)
2. Loosen M2*3 screw (6052B0156101) * 2.
(Fig.1)
3. Disassemble Volume/B.
Electric cross screwdriver (#1) 1
2
Fig.1
Fig.1

Standard Operation Procedure
Document No. Belvedere FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-PPE
Auditor ：Kevin Lee
10(1/1)
2014/08/19
0.1
Disassemble WLAN Module & SSD
1
1. Loosen WLAN card M2*3 screw.
(6052B0156101) * 1. (Fig.1)
2. Loosen SSD M2*3 screw (6052B0156101) * 1.
(Fig.2)
3. Loosen two screws on MB and Audio/B.
(Fig.3)
Electric cross screwdriver (#1) 1
Fig.1
Fig.3
Fig.2

Standard Operation Procedure
Document No. Belvedere FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-PPE
Auditor ：Kevin Lee
11(1/1)
2014/08/19
0.1
Disassemble Pogo /B, Touch FFC, Vibrator
1
1. Disconnect FFC, disassemble pogo /B. (Fig.1)
2. Disconnect touch FFC. (Fig.2)
3. Disassemble vibrator. (Fig.3)
Fig.1
Fig.3
Fig.2

Standard Operation Procedure
Document No. Belvedere FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-PPE
Auditor ：Kevin Lee
12(1/1)
2014/08/190.1
Disassemble DC in Cable
1. Disconnect DC-in cable, and rip acid tape.
(Fig.1)
2. Rip gasket and acid tape, disassemble FFC.
Fig.1
Fig.2

Standard Operation Procedure
Document No. Belvedere FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-PPE
Auditor ：Kevin Lee
13(1/1)
2014/08/190.1
Disassemble Audio/B
1
1. Loosen audio/B screw * 4. (Fig.1)
2. Disassemble audio/B.
Electric cross screwdriver (#1) 1
Fig.1

Standard Operation Procedure
Document No. Belvedere FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-PPE
Auditor ：Kevin Lee
14(1/1)
2014/08/190.1
Disassemble LVDS Cable
2
1. Rip acid tape. (Fig.1)
2. Disassemble LVDS cable. (Fig.2)
Fig.1
1
Fig.2

Standard Operation Procedure
Document No. Belvedere FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-PPE
Auditor ：Kevin Lee
15(1/1)
2014/08/190.1
Disassemble M/B
1
1. Loosen M/B screw * 5. (Fig.1)
2. Disassemble M/B.
Electric cross screwdriver (#1) 1
Fig.1

Standard Operation Procedure
Document No. Belvedere FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-PPE
Auditor ：Kevin Lee
16(1/1)
2014/08/19
0.1
Disassemble Touch Control /B
1
1. Disconnect touch control/B FFC. (Fig.1)
2. Loosen touch control/B screw. (Fig.1)
3. Disassemble touch control /B.
Electric cross screwdriver (#1) 1
Fig.1

Standard Operation Procedure
Document No. Belvedere FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-PPE
Auditor ：Kevin Lee
17(1/1)
2014/08/19
0.1
Disassemble Mid Frame
1
1. Loosen mid frame screw * 15. (Fig.1)
2. Disassemble mid frame.
Electric cross screwdriver (#1) 1
Fig.1