HP mt40 Assembly instructions

EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Notebooks and Tablet PCs
Marketing Name / Model
[List multiple models if applicable.]
HP mt40 mobile thin client
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
6
Batteries
All types including standard alkaline and lithium coin
or button style batteries
2
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
1
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
0
External electrical cables and cords
0
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0

EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Components, parts and materials containing
refractory ceramic fibers 0
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Description #1 Cross head
of screwdriver
Description #2
TORX T8
(2.31mm)
Description #3
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Follow steps described in Disassembly instruction (file attached)
2. If parts can be removed without using a tool, remove it first.
3. Use correct screwdriver and torque value before unlock the screw.
4.
5.
6.
7.
8.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).

Standard Operation Procedure
Document No. : NAIROBI FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
：：
：
Disassemble Battery
1. Slide the battery knob to the left, then remove
the battery. (Fig.1)
1(1/1)
Battery knob
0.1 2012/10/30
Before
After
Fig.1
1
2
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-SE
Fig.2

Standard Operation Procedure
Document No. : NAIROBI FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
：：
：
Disassemble Cover
1. Slide the cover knob to the left, then remove
the cover. (Fig.1)
2(1/1)
0.1 2012/10/30
Before
After
Fig.1
1
2
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-SE
Fig.2

Standard Operation Procedure
Document No. : NAIROBI FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
：：
：
Disassemble HDD
1. Loosen HDD set screw * 3. (Fig.1)
2. Remove the HDD.
3(1/1)
0.1 2012/10/30
1
3
2
Before
After
Fig.1
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-SE
Fig.2
Electric cross screwdriver (0#) 1
HDD assistant fixture 1

Standard Operation Procedure
Document No. : NAIROBI FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
：：
：
Disassemble FAN
1. Loosen FAN set screw * 2, then remove the
FAN. (Fig.1)
4(1/1)
0.1 2012/10/30
1
2
Before
Fig.1
After
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-SE
Fig.2
Electric cross screwdriver (1#) 1

Standard Operation Procedure
Document No. : NAIROBI FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
：：
：
Loosen Keyboard Set Screws
1. Loosen keyboard set screw * 3. (Fig.1)
5(1/1)
0.1
2
1
3
2012/10/30
Fig.1
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-SE
Electric cross screwdriver (#1) 1

Standard Operation Procedure
Document No. : NAIROBI FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
：：
：
Disassemble Keyboard
6(1/1)
0.1
Fig.1
2012/10/30
1. Disassemble the K/B FPC. (Fig.2)
2. Turn the computer over.
Fig.1
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-SE
Fig.2

Standard Operation Procedure
Document No. : NAIROBI FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
：：
：
Disassemble Thermal
7(1/1)
0.1 2012/10/30
1
2
3
4
Intel DIS
6
5
1. Loosen thermal screw *6.
2. Remove the thermal.
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-SE
Electric cross screwdriver (1#) 1

Standard Operation Procedure
Document No. : NAIROBI FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
：：
：
Disassemble CPU
1. Disassemble the CPU by slot screwdriver and
vacuum pen.
8(1/1)
0.1 2012/10/30
Before
Fig.1
After
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Alicia Chien NPSU-SE
Fig.2
Slot screwdriver 1
Vacuum Pen 1