
6
specifications
PNetServer LH 4 and LH 4r
Accessories
Product Accessory1Product No.
Memory •256MB 50ns EDO DIMM Kit (4x64MB)
•1GB 50ns EDO DIMM Kit (4x256MB)
•1MB Video RAM
D6112A
D6114A
D4219A
Processors •Pentium III Xeon 550MHz, 512KB ECC L2 cache
•Pentium III Xeon 550MHz, 1MB ECC L2 cache
•Pentium III Xeon 550MHz, 2MB ECC L2 cache
D8529A
D8530A
D8531A
Storage Devices •9.1GB Ultra3 SCSI disk drive (7,200rpm–common tray)
•9.1GB Ultra3 SCSI disk drive (10,000rpm–common tray)
•18.2GB Ultra3 SCSI disk drive (7,200rpm–common tray)
•18.2GB Ultra3 SCSI disk drive (10.000rpm–common tray)
•36.4GB Ultra3 SCSI disk drive (10.000rpm–common tray)
•9.1GB low-profile, hot-swap Ultra3 SCSI disk drive (7,200rpm)
•9.1GB low-profile, hot-swap Ultra3 SCSI disk drive (10,000rpm)
•18.2GB low-profile, hot-swap Ultra3 SCSI disk drive (7,200rpm)
•18.2GB low-profile, hot-swap Ultra3 SCSI disk drive (10,000rpm)
•36.4GB low-profile, hot-swap Ultra3 SCSI disk drive (10,000rpm)
•9.1GB Ultra/Wide SCSI disk drive (7,200rpm–common tray)
•9.1GB Ultra/Wide SCSI disk drive (10,000rpm–common tray)
•18.2GB Ultra/Wide SCSI disk drive (7,200rpm–common tray)
•9.1GB low-profile, hot-swap Ultra2 SCSI disk drive (7,200rpm)
•9.1GB low-profile, hot-swap Ultra2 SCSI disk drive (10,000rpm)
•18.2GB low-profile, hot-swap Ultra2 SCSI disk drive (7,200rpm)
•18.2GB low-profile, hot-swap Ultra2 SCSI disk drive (10,000rpm)
•36.4GB half-height, hot-swap Ultra2 SCSI disk drive (10,000rpm)
P1213A2
P1214A2
P1215A2
P1167A2
P1169A2
P1217A2
P1168A2
P1216A2
P1166A2
D9419A2
D4911A
D7049A
D7176A
D6106A
D6107A
D7174A
D7175A
D8210A
Internal Storage Expansion Second drive cage for up to 6 additional hot-swap drives3D6077A
Disk Controllers & SCSI Cables •Integrated dual-channel HP NetRAID controller
•HP NetRAID-1Si controller (Ultra2 SCSI,1 channel)
•HP NetRAID-3Si controller (Ultra2 SCSI, 3 channels)
•HP NetRAID-4M controller (Ultra3 SCSI, 4 channels, 64MB cache)
•HP NetRAID-4M controller (Ultra3 SCSI, 4 channels, 128MB cache)
•HP Ultra/Wide SCSI PCI adapter
•2.5m SCSI Cable to connect from HP NetRAID Family Controller to
External Storage4
•HP NetServer LH 3/LH 4 Internal SCSI Cable Kit5
Included
D2140A
D5955A
D9161A
D9351A
D5025A
D6020A
D4282B
1Please see the
HP NetServers Configuration
Guide
for important technical information when choosing your accessoriesor go to http://www.hp.com/go/netserver.
For HP SureStore backup see http://www.hp.com/storage.
2Ultra3 SCSI performance can only be achieved by using an Ultra3 SCSI controller or an Ultra3 SCSI RAID Controller with the Ultra3 drives.
3When used in RAID configuration, additional SCSI HBA (D5025A) is required to support tape devices. This upgrade includes cable to connect to internal SCSI
controller.
42.5m SCSI Cable 68-pin male ultra-high-density offset connector to 68-pin male high-density connector.
5Use in HP NetServer LH 3/LH 4 when HP NetRAID Family Controller is used with internal storage.