
D1000/D1500/D2000/D2500/D4500/D6000
Features
Specications
•Controls
– Volume Control by 21 detent potentiometer for each channel
– LCD Screen: Back-lit LCD allows for crossover configuration, AMP mode configuration and compressor configuartion
– Menu/Prev/Next: Three buttons located near the LCD screen that are used to configure and access the integrated processing
•Connectors
– Input: XLR and 1/4” Phone Jack Balanced & Phono Jack Unbalanced
– Output: 5 way Binding Post & Speakon Jack for each Channel
•Indicator: Signal,-20dB, -10dB, Clip,Protect LED and LCD display
•Protection: Output current limiting, thermal protection, DC offset protection & circuit breaker
•Cooling: Variable speed fan forced cooling
D1000 D1500 D2000 D2500 D4500 D6000
Rate Power
(1kHz, THD 1%)
8 Ω Stereo 215 W 300 W 375 W 440 W 850 W 1100 W
4 Ω Stereo 350 W 500 W 650 W 750 W 1500 W 2000 W
2 Ω Stereo 500 W 750 W 1050 W 1200 W 2250 W 3000 W
8 Ω Bridge 700 W 1000 W 1300 W 1500 W N/A N/A
4 Ω Bridge 1000 W 1500 W 2100 W 2400 W N/A N/A
Input Sensitivity ( 4Ω 1kHz ) 4 dBu
Input impedance 30 kΩBalanced/15 kΩUnbalanced
Input CMRR ( 1kHz ) > 50 dB
Frequency Response ( ±0.5dB ) 20Hz~20 kHz
Amplifier CLASS D
Power Supply Switching mode power supply
T.H.D < 0.03%
Signal to Noise Ratio > 100 dB
Damping Factor ( 8Ω 400Hz ) > 200
Channel Separation ( 8Ω 1kHz ) > 700 dB
Integrated DSP Processing
Crossover : Frequency Range ; 50Hz~3kHz, 24dB/oct
Filters : LowPass & HighPass ( both channels )
Limiter ( Channel independent clip limiter )
PEQ & Time Alignment
Power Source AC 100~240V,50/60Hz
Weught (Net) 4.9 kg 4.9 kg 5.2 kg 5.2 kg 5.9 kg 5.9 kg
Dimensions (W x H x D) 482 x 88 x 280
Professional Power Amplier