HSI Dryonizer 2200 User manual
Dryonizer 2200
CERAMIC BLOW DRYER
IMPORTANT SAFETY INSTRUCTIONS
Any questions? Email us:
CoolShot
Release a shot of
cold air at the touch
of a button.
AirControl Nozzles
2 Nozzle
attachments give
you total control
over the airow.
HeatBalance® Technology
Evenly distributes infrared heat
and provides stamina for longer
blowouts.
Ionic Ceramic Engine
1600 watt turbo ceramic
engine produces quick
and powerful hot air.
Speed/Heat Control
Two speed and three
heat settings give you
maximum control.
2
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using
WARNING: Nozzle can become very hot and there is a serious risk of burns,
electrocution, re or injury. When using electrical appliances, especially when children
are present, basic safety precautions should always be followed, including the
following:
DANGER: Any blow dryer is electrically live even when the switch is o. To reduce the
risk of death or injury by electric shock:
1. Always unplug appliance immediately aer using.
2. Do not use while bathing or in the shower.
3. Do not place or store appliance where it can fall or be pulled into a tub or sink.
4. Do not place in, or drop into water or other liquid.
5. If an appliance falls into water, unplug it immediately. Do not reach into the
water.
WARNING: To reduce the risk of burns, electrocution, re, or injury to persons:
1. This appliance should never be le unattended when plugged in.
2. This appliance should not be used by, on, or near children or by individuals with
certain disabilities.
3. Use this appliance only for its intended use as described in this manual. Do not
use attachments not recommended by the manufacturer.
4. Never operate this appliance if it has a damaged cord or plug, it is not working
properly, if it has been dropped, damaged, or dropped in water. Return the
appliance to HSI service center for examination and repair.
5. Keep the cord away from heated surfaces. Do not pull, twist, or wrap line cord
around blow dryer, even during storage.
6. Never block the air openings of the appliance or place it on a so surface such
as a bed or couch, where the air openings may be blocked. Make sure the air
openings are free of lint, hair, and the like.
7. Never use while sleeping.
8. Never drop or insert any object into any opening.
9. Do not use outdoors or operate where aerosol (spray) products are being used or
where oxygen is being administered.
10. Do not use an extension cord to operate.
11. This appliance is hot when in use. Do not let your eyes and/or bare skin or heat
sensitive areas touch any hot parts or surfaces.
12. Allow blow dryer to cool before storing.
13. Do not place appliance on any surface while it is operating.
14. Do not use with voltage converter.
Keep away from
children
Keep away from
water
3
OPERATING INSTRUCTIONS
Use on Alternating Current (60Hz) only. Standard blow dryers are designed to operate
at 110v 60Hz. This appliance has a polarized plug (one blade is wider than the other).
As a safety feature, this plug will t in a polarized outlet only one way. If the plug does
not t fully in the outlet, reverse the plug. If it still does not t, contact a qualied
electrician. Do not attempt to defeat this safety feature. Use of this blow dryer on the
same circuit or fuse with other electrical products or appliances may trip a 15 amp
circuit breaker or blow a 15 amp fuse. NEVER replace the fuse with one rated higher
than the capacity of the circuit. Doing so could result in an electrical re.
Important Information
This model may come with a fused plug with a reset button. If for some reason the
blow dryer does not turn on, please press hard on the reset button.
Adjustable Temperature
The HSI blow dryer has an adjustable thermostat. To prevent hair damage, make sure
to use the proper temperature for your hair type. Keep the blow dryer moving along
the strand of hair to avoid damage from excess heat.
Take extra care when using a professional blow dryer.
Changing The Temperature & Speed
To set the temperature
1. Choose one of 3 heat levels: Low, Medium, and High (see table on opposite page
for more details.
2. Aer selecting the heat level, switch the speed setting to the desired speed and
this will turn the device on.
4
Cleaning
1. Be sure appliance is turned o, unplugged, and cooled o.
2. Blow dryer must be cleaned only when cold to the touch.
3. Use a clean, so, slightly damp cloth to wipe the nozzle.
4. Clean dust and lint o the vents on a regular basis.
5. Do not use any object that can scratch the nozzle.
6. Do not use water, chemicals, or liquids to clean the appliance, and do not allow
any water or liquids to go into the appliance. Do not use thinners, gasoline,
alcohols, etc.
Storage
1. Be sure appliance is turned o, unplugged, and cooled o.
2. Do not wrap the cord around the appliance. Never allow the power cord to be
pulled severely, bent, wrapped, or twisted around the appliance as damage may
occur.
3. Do not put any stress on the cord where it enters the handle, as it could cause the
cord to fray and possibly break.
4. Do not hang blow dryer up by the cord. Instead, use the designated loop at the
base of the handle for hanging.
5. Store in the original packaging or in a clean, dry place.
HIGH HEAT
MEDIUM HEAT
LOW HEAT
Use with thick wavy or
curly hair
Use with normal hair
Use with very ne, fragile, or
damaged hair.
Heat Temperature by Hair Type
NOTE: If you are unsure of your type of hair, begin with a lower temperature
5
HOW-TO BLOW DRY YOUR HAIR
Some experience is necessary when learning to blow dry. Aer using the blow dryer
several times, you will learn the ideal way to blow dry and style your hair.
3Divide the hair into manageable sections
and clip the upper layers on top of your
head and out of the way.
1Hair should be free of tangles. Spray HSI
thermal protector (sold separately) onto
your hair and spread evenly with ngers.
5With the the nozzle facing down and
towards the ends of the hair, twist the brush
in the direction of the hair ends.
4Grab one small section of hair to start
working with and place the round brush
under the section
2Choose a smaller or larger round brush
based on the type or style you want to
acheive.
6As you twist the brush, move down towards
the end of your hair section together with
the Dryonizer in one smooth and slow
motion.
6
7In order to get more volume, blow dry the
bottom of the hair section while pulling
outwards to the side of your head.
9To give your bangs more volume, blow
dry both the top and bottom of the hair
sections. To get more waviness, leave the
bang curled on the brush aer styling and
press the ColdShot button to cool it down.
10 As a nishing touch for a sleek shiny look,
drop a few drops of HSI Argan Oil (sold
separately) on your palms. Rub your palms
and apply evenly starting at the ends.
8To blow dry the back of your head, roll
the brush and move it together with the
Dryonizer towards your back.
Never touch heating nozzle when hot
STYLING TIPS
1. Pretreat hair with the HSI Thermal Protector (sold separately).
2. Make sure to select the right temperature for your hair type.
3. Start by “rough drying” the hair until it’s about 80-90% dry using just
your ngers to run through your hair (without the brush).
4. Pre-heat your brush before applying to each section so that it heats
one side of the section while the dryer heats the other side.
5. Point the dryer’s nozzle in the direction that the hair falls.
7
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY PURPOSES.
For more information, email us at:
service@hsiprofessional.com
Table of contents
