HTC 2Q7Y100 User manual

English
2Q7Y100
Guide
© 2021 HTC Corporation. All rights reserved. VIVE, the VIVE logo, HTC and the HTC logo are
trademarks of HTC Corporation. HTC Corporation. No. 23, Xinghua Rd., Taoyuan District, Taoyuan City,
Taiwan (R.O.C).

English
What’s in the box
Top and side views
1. Headset button
2. Volume buttons
3. Temple pad
4. Face cushion
1. VR glasses
2. Face cushion
3. Nose rest
4. USB Type-C cable
5. Pouch

English
Front view
1. Camera 2. LED indicator
Bottom view
1. Microphone
2. Speakers
3. USB Type-C receptacle
cable

English
Lens view
1. Proximity sensor 2. Myopic dial
Your VR glasses need to be set up before using it for the first
time.
1. Use the USB Type-C cable in the box to connect the VR
glasses to your phone with the setup app installed.
2. Follow the instructions on the app to complete the setup.
Putting on your VR glasses for the first time
The VR glasses automatically turn on when plugged in to a
phone, power bank, or any power source. The LED indicator in
front will light up when the VR glasses turn on.
Press the Power button for 2 seconds to turn off the VR glasses.
Important: This device can only be used when connected to a
power supply through a USB Type-C cable. The internal battery
of the device is only used for saving settings when the device is
off or for maintenance. The internal battery power supply cannot
be used directly.
Powering on and off

English
Using VR mode
Experience VR with your VR glasses.
1. Connect your VR glasses to a power source. The VR glasses
turn on.
2. Wear your VR glasses, and then grab the phone.
2. Use the phone to interact with objects in VR.
Connecting your VR glasses to Wi-Fi
Connect your VR glasses to a Wi-Fi network so you can browse
and download VR content.
1. While wearing the VR glasses, use the phone to select
Settings onscreen.
2. Select Network, and then turn the Wi-Fi switch on.
3. Select the Wi-FI network you want to connect to in the list.
4. Select Connect.
Note: If the network has a password, enter the password
first.