Htzsafe HB-4040S User manual

Wireless Alarm Receiver
User Manual

1
1. Configuration List
2. System Components And Usage
1 piece (includes 1 set installation accessories)
1 piece
Wireless Alarm Receiver
English Manual
Wireless Alarm Receiver
Indicator Light: Will be red if power on;Will be flashing if on setting mode
Speaker: Will alarm for 5 seconds if the detector be triggered
Indicator Light
Speaker
Backup Battery
Compartment
Backup Battery Compartment:4 pieces AA 1.5V batteries(can keep the wireless alarm receiver
working continuously for 100 hours if AC power off)

2
3. Operation Instructions
Power : power jack(DC5V)
ON/OFF: power switch(turn on/off the wireless alarm receiver)
set button(add/delete the detectors of the wireless alarm receiver)
Tone Button: switch the ring tones(total 4 ring tones optional)
Power
ON/OFF
Tone Button
(1)How to add detectors to the wireless alarm receiver
ADD
Step 1
Power on the by the power adapterwireless alarm receiver
Power

Step 2
long time press the “ON/OFF” button for 5 seconds and release the button when
the indicator light flashing;
Step 3
Trigger the detector(for example,trigger the solar&wireless photoelectric beam sensor)
(a bleep prompt and the indicator light stops
flashing means the detector has been added to
the wireless alarm receiver successfully)
Step 4
Trigger the detector again to confirm the detector has been added to the wireless alarm
receiver already.
stop flashing
3
ON/OFF
ON/OFF
light up
press the ON/OFF button
for 5 seconds
flashing
release the button

(3)How to switch the ring tones
Step 1
Step 2
Power on the wireless alarm receiver by the power adapter
Make sure the wireless alarm receiver has added the detectors already
Step 3
Press the “Tone Button” once to switch the ring tones(total 4 ring tones optional)
Tone Button
(2)How to delete the detectors of the wireless alarm receiver
Step 1
Power on the wireless alarm receiver by the power adapter
Step 2
long time press both the “ON/OFF” button and “Tone Button for 10 seconds and release
the buttons when you heard a long bleep;
Note: all the detectors will be deleted by this operation;
”
ON/OFF
Tone Button
4

5
Static Current 20mA; Alarming Current 180mA
Working Current
DC5V
433MHz FSK+FHSS
Technical Parameters
Working Voltage
Wireless Frequency
Backup Battery
Item
5. Technical Parameters
162mm
52mm
Technical Parameters
4 pieces AA 1.5V batteries(package is not included)