Huawei HiSecEngine USG6000F Series User manual

HiSecEngine USG6000F Series
Quick Start
Issue 04
Date 2022-11-24
HUAWEI TECHNOLOGIES CO., LTD.

Copyright © Huawei Technologies Co., Ltd. 2022. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specied in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees
or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every eort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: https://e.huawei.com
Issue 04 (2022-11-24) Copyright © Huawei Technologies Co., Ltd. i

Contents
1 About This Document.............................................................................................................1
2 Device Introduction and Cable Connection.......................................................................3
2.1 USG6615F, USG6625F............................................................................................................................................................ 4
2.2 USG6635F, USG6655F, USG6685F......................................................................................................................................6
2.3 USG6710F, USG6715F............................................................................................................................................................ 7
2.4 USG6725F................................................................................................................................................................................ 10
3 Accessing the Internet......................................................................................................... 12
4 Appendix..................................................................................................................................14
4.1 Activating Licenses............................................................................................................................................................... 14
4.2 Supplier's Declaration of Conformity (SDoC)............................................................................................................. 14
4.3 Obtaining Product Documents and Technical Support............................................................................................15
HiSecEngine USG6000F Series
Quick Start Contents
Issue 04 (2022-11-24) Copyright © Huawei Technologies Co., Ltd. ii

1 About This Document
Overview
Thank you for using USG6000F series products. This document shows the product
appearance and provides the essential information required for cable connections
and initial conguration of the USG6000F, helping you quickly complete the initial
installation and conguration of the USG6000F. For detailedhardware description,
refer to the
Hardware Guide . For detailed congurations, refer to the
Conguration Guide .
The following table lists the product version related to this document.
Product Name Version
● USG6615F
● USG6625F
● USG6635F
● USG6655F
● USG6685F
● USG6710F
● USG6715F
● USG6725F
V600R020C10
V600R021C00
V600R021C10
V600R022C00
Intended Audience
This document is intended for installation personnel and administrators who
install and maintain USG6000F. The installation personnel or administrators must
have experience in the installation and maintenance of networking devices.
Symbol Conventions
The symbols that may be found in this document are dened as follows.
HiSecEngine USG6000F Series
Quick Start 1 About This Document
Issue 04 (2022-11-24) Copyright © Huawei Technologies Co., Ltd. 1

Symbol Description
Indicates a hazard with a high level of risk which,
if not avoided, will result in death or serious
injury.
Indicates a hazard with a medium level of risk
which, if not avoided, could result in death or
serious injury.
Indicates a hazard with a low level of risk which,
if not avoided, could result in minor or moderate
injury.
Indicates a potentially hazardous situation which,
if not avoided, could result in equipment damage,
data loss, performance deterioration, or
unanticipated results.
NOTICE is used to address practices not related to
personal injury.
Supplements the important information in the
main text.
NOTE is used to address information not related
to personal injury, equipment damage, and
environment deterioration.
Update History
Updates between document issues are cumulative. Therefore, the latest document
issue contains all updates made in previous issues.
Issue 01 (2021-01-29)
Initial commercial release.
Issue 02 (2021-08-20)
The second commercial release.
Issue 03 (2022-05-12)
The third commercial release.
● Added the USG6685F.
● Added the USG6710F, USG6715F.
● Added the USG6725F.
Issue 04 (2022-11-24)
The fourth commercial release.
HiSecEngine USG6000F Series
Quick Start 1 About This Document
Issue 04 (2022-11-24) Copyright © Huawei Technologies Co., Ltd. 2

2 Device Introduction and Cable
Connection
D ANGER
● Deactivate power whenever possible before performing maintenance on power
cables.
● Always wear a properly-grounded wrist strap before touching the device.
● Laser beams will cause eye damage. Do not look into bores of optical modules
or optical bers without eye protection.
NO TE
● Figures in the document are for reference only and may be dierent from actual
devices.
● The type and quantity of items in a packing list vary with the product model. Check the
delivered items against the actual packing list.
● Some devices are delivered with dust plugs. Cover idle optical interfaces with dust plugs.
Keep the unused dust plugs for future use.
● The power cable varies according to the delivery country.
● To use adjustable mounting ears at the rear or adjustable guide rails, purchase them
separately.
HiSecEngine USG6000F Series
Quick Start 2 Device Introduction and Cable Connection
Issue 04 (2022-11-24) Copyright © Huawei Technologies Co., Ltd. 3

2.1 USG6615F, USG6625F
Device and Auxiliary Materials
Figure 2-1 Appearance and auxiliary materials of the USG6615F, USG6625F
Cable Connection
Connect cables according to Figure2 and power on the device. As device does not
provide a power switch, it starts up immediately after receiving power. When the
SYS indicator on the frontpanel is blinking (once every two seconds), the device is
running and ready for conguration.
HiSecEngine USG6000F Series
Quick Start 2 Device Introduction and Cable Connection
Issue 04 (2022-11-24) Copyright © Huawei Technologies Co., Ltd. 4

Figure 2-2 Connecting cables of USG6615F, USG6625F
HiSecEngine USG6000F Series
Quick Start 2 Device Introduction and Cable Connection
Issue 04 (2022-11-24) Copyright © Huawei Technologies Co., Ltd. 5

2.2 USG6635F, USG6655F, USG6685F
Device and Auxiliary Materials
Figure 2-3 Appearance and auxiliary materials of USG6635F, USG6655F,
USG6685F
Cable Connection
Connect cables according to Figure2 and power on the device. As device does not
provide a power switch, it starts up immediately after receiving power. When the
SYS indicator on the frontpanel is blinking (once every two seconds), the device is
running and ready for conguration.
HiSecEngine USG6000F Series
Quick Start 2 Device Introduction and Cable Connection
Issue 04 (2022-11-24) Copyright © Huawei Technologies Co., Ltd. 6

Figure 2-4 Connecting cables of USG6635F, USG6655F, USG6685F
2.3 USG6710F, USG6715F
Device and Auxiliary Materials
In the preceding gure, the AC model is used as an example. The USG6715F AC
and DC models dier only in the power supply mode.
HiSecEngine USG6000F Series
Quick Start 2 Device Introduction and Cable Connection
Issue 04 (2022-11-24) Copyright © Huawei Technologies Co., Ltd. 7

Figure 2-5 Appearance and auxiliary materials of the USG6710F, USG6715F
Cable Connection
Connect cables according to Figure2 and power on the device. As device does not
provide a power switch, it starts up immediately after receiving power. When the
SYS indicator on the frontpanel is blinking (once every two seconds), the device is
running and ready for conguration.
HiSecEngine USG6000F Series
Quick Start 2 Device Introduction and Cable Connection
Issue 04 (2022-11-24) Copyright © Huawei Technologies Co., Ltd. 8

Figure 2-6 Connecting cables of USG6710F, USG6715F
HiSecEngine USG6000F Series
Quick Start 2 Device Introduction and Cable Connection
Issue 04 (2022-11-24) Copyright © Huawei Technologies Co., Ltd. 9

2.4 USG6725F
Device and Auxiliary Materials
Figure 2-7 Appearance and auxiliary materials of the USG6725F
Cable Connection
Connect cables according to Figure2 and power on the device. As device does not
provide a power switch, it starts up immediately after receiving power. When the
SYS indicator on the frontpanel is blinking (once every two seconds), the device is
running and ready for conguration.
HiSecEngine USG6000F Series
Quick Start 2 Device Introduction and Cable Connection
Issue 04 (2022-11-24) Copyright © Huawei Technologies Co., Ltd. 10

Figure 2-8 Connecting cables of USG6725F
HiSecEngine USG6000F Series
Quick Start 2 Device Introduction and Cable Connection
Issue 04 (2022-11-24) Copyright © Huawei Technologies Co., Ltd. 11

3 Accessing the Internet
Default Conguration
Table 3-1 lists the default conguration of the device.
Table 3-1 Default conguration
Item Description
Management port The IP address is 192.168.0.1.
Administrator
account/password
No default account/password (Instead, registration is
required upon your rst login.)
Procedure
Step 1 Set the IP address to 192.168.0.2 (or any other in the range of 192.168.0.2 to
192.168.0.254) andsubnet mask to 255.255.255.0 of the corresponding network
interface on the administration PC.
Step 2 Open a web browser and navigate to https://192.168.0.1:8443.
Step 3 Log in to the web management page of the device and register an administrator
account and password as prompted.
HiSecEngine USG6000F Series
Quick Start 3 Accessing the Internet
Issue 04 (2022-11-24) Copyright © Huawei Technologies Co., Ltd. 12

Step 4 After the account is created successfully, the system displays a message prompting
you to use the account to log in to the device. Click OK.
Step 5 On the login page, enter the registered user name and password, and click Login.
----End
HiSecEngine USG6000F Series
Quick Start 3 Accessing the Internet
Issue 04 (2022-11-24) Copyright © Huawei Technologies Co., Ltd. 13

4 Appendix
4.1 Activating Licenses
More functions of the device will be available after a license is activated. Activate
a license as follows:
1. Click the System tab on the web UI, and choose License Management from
the navigation tree.
2. On the License Management page, click Browse to select the license le on
the local PC.
3. Click Activate to activate the license.
4.2 Supplier's Declaration of Conformity (SDoC)
Unique Identier: trade name: HUAWEI; product name: Firewall; model number:
USG6000F
Responsible Party- U.S. Contact Information
Huawei Technologies USA Inc. 5700 Tennyson Parkway, Suite 500
Plano, Texas 75024
Main: 214-919-6000 / TAC Hotline: [phone]
FCC Compliance Statement ( for products subject to Part 15)
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
HiSecEngine USG6000F Series
Quick Start 4 Appendix
Issue 04 (2022-11-24) Copyright © Huawei Technologies Co., Ltd. 14

4.3 Obtaining Product Documents and Technical
Support
● Log in to https://support.huawei.com/weiknow/?lang=en to ask questions
online.
● Log in to Support-E, and select a specic product model and versionto nd its
documentation.
● Log in to the Info-Finder website Info-Finder, view the hardware and
software specications of the device based on the product model and version
information.
● Log in to https://forum.huawei.com/enterprise and post your questions in
the community.
● Contact your local representative for further information.
NO TE
The contact information is available at https://e.huawei.com/en/service-hotline.
HiSecEngine USG6000F Series
Quick Start 4 Appendix
Issue 04 (2022-11-24) Copyright © Huawei Technologies Co., Ltd. 15