Huawei Consumer Cellular Envoy User manual

Consumer Cellular Envoy User Guide
TM

1
Your Phone

2
Installing the SIM Card and Battery
Before you begin to use your phone, a SIM card must be
inserted. Follow the steps laid out below to insert your
SIM card into the phone.
Power off your phone before attempting to remove the battery
or SIM card.

3
Inserting the microSD Card
Your phone supports a microSD card of up to 32 GB.
No microSD cards are included in the product package.
You can purchase one separately.
Charging the Battery
When the icon is displayed or the charging icon
stops blinking, the battery is fully charged.
If the battery has not been used for a long time or if the
battery power is completely depleted, the charging icon
may take several minutes to appear after you start
charging.

4
Keys and Functions
In this guide, the navigation keys on your phone are indicated
by , , , , , .
Press To
Select the option displayed in the lower left
corner of the screen.
Select the option displayed in the lower right
corner of the screen.
Place or answer a call.
View call logs in standby mode.
Power your phone on or off (press and hold
the key for 3 or more seconds).
End or reject a call.
Return to standby mode.
Turn the backlight on or off in standby
mode.
Start the camera.

5
Press To
In text input mode, delete the character to
the left of the cursor. Press and hold the key
for 3 or more seconds to clear all the
characters to the left of the cursor.
Return to the previous menu.
Confirm a selection or display a menu.
Access the functions assigned to the navigation
keys in standby mode.
-
Enter numbers, letters, and symbols in text
input mode.
Call voicemail in standby mode (press and
hold for 3 or more seconds).
Speed-dial phone numbers in standby mode
(press and hold the keys –for
3 or more seconds). To set speed dial
numbers, select Menu > Contacts >
Options > Manage Contacts > Speed
Dialing.

6
Press To
Enter *, +, Por Wwhen entering phone
numbers.
Enable or disable the Vibration profile in
standby mode (press and hold the key for 3
or more seconds). To configure the profile,
select Menu > Settings > Phone >
Sound > Ringer Type.
Enter #.
Lock the keypad (press and hold the key for
3 or more seconds).
Adjust the volume.
Turn the external screen on when the
clamshell is closed and the external screen is
off.

7
Status Icons
Icon Indicates
Signal strength
Call in progress
Missed calls
New text messages
New multimedia messages
New voicemails
Message storage capacity is full. No more
space for new messages.
Music is playing in the background
Alarm enabled
Bluetooth turned on
Bluetooth headset connected
Your phone is sending data using Bluetooth
Your phone is receiving data using Bluetooth

8
Icon Indicates
Your battery is currently charging
Battery full
Battery low
Headset connected
microSD card inserted
GPS is currently enabled
Ringing profile activated
Ringing and Vibration profile activated
Vibration profile activated
Silence profile activated
Text Input
Changing the Text Input Mode
The current text input mode is displayed in the upper
right corner of a text editing screen. Press to
switch between text input modes.

9
Entering a Word
In multi-tap input mode, press the number key labeled
with the desired letter once to enter the first letter on the
key, twice to enter the second letter on the key, and so
on.
In predictive input mode:
1. Press each key once according to the spelling
sequence of the desired word.
Your phone displays candidate words that may be
spelled by the keystroke sequence.
2. Press to scroll to the desired word.
3. Press to enter the word, or press to enter
the word followed by a space.
Entering a Number
In 123 input mode, press the desired number key.
In any input mode except 123, press and hold the
corresponding number key for 3 or more seconds to
enter the desired digit.
Entering a Symbol
1. In any input mode, press to display a list of
symbols.
2. Press to scroll to the desired symbol.
3. Press to enter the symbol.