Huawei WS5800 User manual

Model: WS5800
HUAWEI WiFi Mesh (2-pack)/(3-pack)
Quick Start Guide
Skrócona instrukcja obsługi
Snabbstartsguide
Hurtigstartveiledning
Hurtigstartguide
Pika-aloitusopas
Schnellstartanleitung
Короткий посібник користувача
Ghid de pornire rapidă
Stručná úvodní příručka
WiFi Yönlendirici Hızlı Kullanım Kılavuzu
Kratko uputstvo
Īsa pamācība
Sparčiosios paleisties vadovas
Kiirtutvustus
Краткое руководство пользователя
Упатство за брз почеток
Ръководство за бърз старт
Stručná úvodná príručka
Gyors útmutató
Vodič za brzi početak rada
Vodnik za hiter začetek
Οδηγός γρήγορης έναρξης

Contents
Quick Start Guide ................................................... 1
Skrócona instrukcja obsługi ................................... 14
Snabbstartsguide ................................................. 28
Hurtigstartveiledning ............................................. 41
Hurtigstartguide ................................................... 53
Pika-aloitusopas .................................................. 66
Schnellstartanleitung ............................................ 79
Короткий посібник користувача ............................ 93
Ghid de pornire rapidă ........................................ 108
Stručná úvodní příručka ...................................... 122
WiFi Yönlendirici Hızlı Kullanım Kılavuzu ................ 136
Kratko uputstvo .................................................. 157
Īsa pamācība ..................................................... 170
Sparčiosios paleisties vadovas ............................. 184
Kiirtutvustus ...................................................... 198
Краткое руководство пользователя .................... 211
Упатство за брз почеток .................................... 225
Ръководство за бърз старт ................................ 239
Stručná úvodná príručka ..................................... 253
Gyors útmutató .................................................. 267
Vodič za brzi početak rada ................................... 281
Vodnik za hiter začetek ....................................... 295
Οδηγός γρήγορης έναρξης .................................. 309

1
Quick Start Guide
Getting Started
1
4
6
7
8
5
2 3
NFC detection area
RESET button
Power button: Press once to power on the device, or
press and hold for at least three seconds to power it o󰀨.
WAN port: Connect to optical modems, broadband
modems, etc.
LAN port: Connect to a wired Internet device, such as a
computer.
Power port
H button Indicator
Scan the QR code to download and install the HUAWEI smart
device management app on your mobile phone or tablet.
Step 1: Install the app
If the app is already installed on your
phone, make sure you have the latest
version of the app.

2
Step 2: Connect the cables
Take out a router from HUAWEI WiFi Mesh, connect it to the
optical/broadband/cable modem using a network cable, then
connect it to a power supply.
Optical/broadband/cable modem
(from your broadband provider)
Router
Insert the cable to the
WAN port on the router
Internet
If the indicator is steady red, this indicates that the router is not
connected to the Internet. Please refer to "Step 3: Set up the
router".
POWER
RESET
WAN
LAN1
LAN2
LAN3
POWER
LA N
ADSL
RESET
LAN WAN
Step 3: Set up the router
Method 1: Congure the router on the app
Connect your mobile phone to the Wi-Fi
®of the router
connected to the modem (no password required). Check for
the Wi-Fi name on the bottom of the router.
1
WiFi
WiFi
Connected
Wi-Fi Name: XXXXXX

3
Open the app. After the app has detected the router, touch
CONFIGURE.
If the prompt box does not appear,
touch +.
2
CONFIGURE
LATER
Touch GET STARTED.
3
GET STARTED
4Enter your broadband account and password.
If your Internet connection does not require an account and
password, please skip to the next step.
Step 1
VLAN
Broadband account
Broadband password
CONNECT
If you need to congure VLAN on
your network, contact your broadband
carrier to conrm the VLAN
parameters, and enable the VLAN
switch on the screen.

4
Step 2
Wi-Fi name
Wi-Fi password
Tri-band
auto-selection
Enable Tri-band auto-selection: The 2.4 GHz and 5 GHz
Wi-Fi names will be the same. You will automatically connect
to the faster Wi-Fi network.
• Reconnect to the router's Wi-Fi to access the Internet.
• If the router cannot be congured on the app, congure the
router on the web-based management page by following the
instructions in Method 2.
Set a new Wi-Fi name, Wi-Fi password, and management
password for the new router.
5
NEXT
Connect to Wi-Fi

5
Method 2: Congure the router on the web-based
management page
Connect your mobile phone to the Wi-Fi of the router
connected to the modem (no password required). Check for
the Wi-Fi name on the bottom of the router.
1
2Open the browser and you will be automatically redirected
to the web-based management page (if the page is not
displayed automatically, enter "192.168.3.1" in the browser
address bar). Follow the onscreen instructions to congure
the router.
Let's get started
WiFi
WiFi
Connected
Wi-Fi Name: XXXXXX

6
The other router(s) in the HUAWEI WiFi Mesh is/are plug and
play.
Place the router(s) where Wi-Fi signal reception is poor, and
connect it/them to the power supply. Wait for approximately two
minutes until the indicator turns steady blue, indicating that the
router is connected to the network. You can also check their
network connection through the app.
Step 4: Connect the other router(s) to the
power supply
• For best results, place the routers within 10 meters of each other
with one wall in-between at most.
• All routers share the same Wi-Fi name and password. When you
move across rooms, you will automatically connect to the faster
Wi-Fi network.
• If a router's indicator is steady red, this means that it cannot
connect to the Internet. Please refer to "Indicator - Steady red"
below for more details.

7
Indicator
Steady blue: Connected to the Internet.
Steady red: Not connected to the Internet.
Flashing: The router has detected a pairable device.
When other HUAWEI routers (with Hor Hi button) are detected,
the indicator on the HUAWEI WiFi Mesh will ash. When
this happens, touch the HUAWEI WiFi Mesh's Hbutton. The
indicator should ash quickly, indicating that the pairable device
is connecting to the HUAWEI WiFi Mesh. The connection
process is complete when the indicator stops ashing.
• If you touch the H button accidentally, wait for approximately
two minutes and the indicator will be back to normal
automatically.
• The Hbutton also features WPS functionality.
For the router that is connected to the modem:
• Ensure that the Ethernet cable is not loose and connected
correctly.
• Contact your carrier to check for any network failure.
For the router(s) that is/are not connected to the modem:
• Ensure that the distance between two routers is less than 10
meters and there are no more than two walls in between.

8
Frequently Asked Questions (FAQs)
1. What should I do if after conguring my router, my mobile
phone automatically connects to the Wi-Fi network of the
previously connected optical/broadband/cable modem
instead of the Wi-Fi network of my router?
2. What should I do if the router is not recognized on the
app?
It is recommended that you disable the Wi-Fi network of your
previous optical/broadband/cable modem to reduce potential
signal interference with your router.
• Ensure that you have the latest version of the app.
• Ensure that your phone is connected to the Wi-Fi network
of the router that is connected to the modem and is to be
congured.
• Ensure that all routers are new or restored to factory
settings.
• Ensure that the router's power supply is well connected. Wait
until the router completes the startup process and try again.
• Ensure that there are no more than two walls between your
phone and the router that you are conguring.
• Ensure that the distance between two routers is less than 10
meters and there are no more than two walls in between.
3. What should I do if I encounter any of the following issues
during the conguration of the router?
• If your phone cannot nd the router's Wi-Fi, ensure that the
router is connected to a power supply. Wait until the router
completes the startup process. Then try searching for the
router's Wi-Fi again on your phone.
• If "Internet cable not detected" is prompted, ensure that the
Ethernet cables are well connected and in good condition.