Hudl sideline plus User manual

See all instructions and videos at
hudl.com/sideline/plus
Setup Guide
Plus Package

Table of Contents
Table of Contents
Setup Option #1 - Press Box & End Zone Angle ..............4
Router Setup ............................................................................................ 6
HDMI Splitter Setup.................................................................................. 9
Streaming Kit Setup ............................................................................... 12
Setup Option #2 - Press Box Angle(s) Only.................... 14
Router Setup .......................................................................................... 16
Streaming Kit Setup ............................................................................... 19
Connect Your iOS Devices ...............................................22
Instructions............................................................................................. 23

Introduction
3
Before you get started
1. Download and log in to the Hudl Sideline app.
Use an internet or cellular connection to download the app to all
recording and viewing devices. Open the app and log in with your
Hudl username and password.
Look for this icon in the App Store.
2. Set up your press box and end zone cameras
like normal.
Hudl Sideline’s Plus hardware will easily integrate with your existing
press box and end zone cameras.

4
Setup Option #1
With this setup, you’ll record from the end zone with your existing
camera and from the press box using an iPad or iPhone.
Router
Streaming Kit
Portable Battery
HDMI Splitter
Camera

5
iOS Recording Device

Option #1: Router Setup
6
Power Adapter
Velcro Straps
Power Cord
Ethernet Cord
Portable Battery
Power Strip (not included)
Step #1
Set up your router in the end zone.
What you’ll need:
Router

Option #1: Router Setup
7
A. Remove the cover from the
bottom of the router and plug
the orange ethernet cord
into the Main port. Reattach
the cover to protect the
connection.
B. Plug the other end of the
ethernet cord into the POE port
on the power adapter.
FrontBack

Option #1: Router Setup
8
C. Plug one end of the power cord into the
adapter and the other end into a power
strip (not included).
D. Plug the power strip into the portable battery.
Flip the battery’s AC Output switch to On before
pressing the power button.
E. Use the velcro straps to secure
the router to the pole of your end
zone camera. Point it toward your
recording device in the press box.
Point at
Press Box

Option #1: HDMI Splitter Setup
9
Step #2
Split your video feed between
a monitor and streaming kit.
What you’ll need:
HDMI Splitter
HDMI CordAC Power Cord
If your end zone camera does not use a monitor, skip to page 12.

Option #1: HDMI Splitter Setup
10
A. Plug the HDMI cord coming from your
camera (the one you normally connect
to your end zone monitor) into the HDMI
splitter’s INPUT port.
B. Plug one end of another HDMI cord into OUTPUT 1 on
the HDMI splitter.
To End Zone
Monitor