DIMMER
Press and release the DIMMER key to enter
the dimmer popup. Adjust the backlight in-
tensity by pressing the + - function keys.
In DAY mode press INVERT to change from
white to black background.
Press NIGHT or DAY to change the control
panels intensity.
In NIGHT mode press RED or GREEN to
change night color.
FUNCTION KEYS
The function keys switch ON/OFF the
AUTO functions.These are shown in the
screen if available.
Screen example shows auto
trim ON.
If no AUTO functions are pre-
sent,Trim Memories will be shown.
When blades are deployed to a specic posi-
tion, press and hold to save a trim memory.
Controlling trim and list Dimmer Night & Day mode Special Key functions
ENTER KEY
The Enter key enters menus and turns on and
off specic functions in menus.
CENTER KEY
The center key changes between different main
screens. (If available)
FORCE RETRACT
Force Retract is a function for fast retraction
of the Interceptors.
All auto functions are automatically turned off
and the Interceptors are fully retracted to their
neutral position.
Force Retract is activated by pressing and hold-
ing down
both LIST keys simultaneously for 0.5 sec.
Additional information is described in the Op-
erators Manual.
013152-01 ENGLISH
Trim forward ( bow down )
Both port and starboard Inter-
ceptors extend simultaneously
and the ship’s bow will trim
down.
Trim aft ( bow up )
Both port and starboard Inter-
ceptors retract simultaneously
and the ship’s bow will trim up.
List to port
Port side Interceptors retract
and starboard Interceptors
extend and the ship will list to
port.
List to starboard
Starboard side Interceptors re-
tract and port side Interceptors
extend and the ship will list to
starboard.
(Press and hold a key for faster
movement)