Hunt Electronic HLC-1NCF User manual

User Manual
INDOOR DOME IP
CAMERA

2
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MISTURE.
DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS.
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION：TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
COPYRIGHT
THE TRADEMARKS MENTIONED IN THE MANUAL ARE LEGALLY REGISTERED
TO THEIR RESPECTIVE COMPANIES.

3
Content
I. PREFACE ................................................................................................................4
II. PRODUCT SPECIFICATIONS................................................................................4
III. PRODUCT INSTALLATION...................................................................................7
A. MONITOR SETTINGS ...............................................................................................7
B. HARDWARE INSTALLATION.......................................................................................8
C. IPASSIGNMENT ...................................................................................................12
D. INSTALLACTIVEXCONTROL...................................................................................16
IV. LIVE VIDEO.........................................................................................................23
V. CAMERA CONFIGURATION................................................................................26
A. SYSTEM ..............................................................................................................27
B. NETWORK ...........................................................................................................32
C.A/V SETTING .......................................................................................................56
D. EVENT LIST .........................................................................................................64
VI. NETWORK CONFIGURATION ...........................................................................74
VII. I/O CONFIGURATION........................................................................................75
VIII. FACTORY DEFAULT.........................................................................................79
IX. UNIVERSAL PASSWORD ..................................................................................80
X. PACKAGE CONTENTS........................................................................................83
XI. SD CARD COMPATIBILITY ................................................................................84
V1.2_20140106

4
I. Preface
This is a 1/3.2” CMOS sensor IP camera with a built-in web server. The user can
view real-time video via IE browser. It supports H.264, and M-JPEG video
compression, providing smooth and high video quality. The video can be stored in
a SD card and playback remotely.
With a user friendly interface, it is an easy-to-use IP camera which is designed for
security application.
II. Product Specifications
5 Megapixel Indoor Dome
3-Axis
3D+2D Digital Noise Reduction
Digital Wide Dynamic Range
Manually Day & Night Switch time
Built-in IR LED 15 Meter
Power over Ethernet available
Video output
H.264/ M-JPEG / MPEG4 compression
SD card backup
iPhone/iPad/Android Supported
SDK for Software Integration
Free Bundle 36 ch recording software
Hardware
CPU
ARM Cortex A9

5
RAM
256MB
Flash
16MB
Image sensor
1/3.2” Megapixel CMOS sensor
Sensitivity
B / W: 0.1 Lux (AGC ON)
Lens Type
Vari-focal Lens 3-9mm@F1.8
Angle of View
27.31°~ 75.24°(H)
19.09°~ 54.16°(V)
ICR
Mechanism IR cut Filter (Optional)
LED
Built-in 18 IR LED
IR Distance 15M
I/O
DI / DO
Video output
Yes
3-Axis Gimbal
Adjustments Angle
Pan: 172∘
Tilt: 60∘
Rotation: 360∘
Audio
G.711(64K) and G.726(32K,24K) audio
compression
Input : External Mic In
Output: External Line Out
Power over Ethernet
Yes, PoE Class 0 (IEEE802.3af)
Power consumption
DC12V: 4.0W(IR Off), 5.5W(IR On)
PoE : 4.8W(IR Off), 6.7W(IR On)
Operating Temperature
0°C ~ 45°C
Dimensions
132mm (φ)x 108mm(H)
Weight
680g
Network
Ethernet
10/ 100 Base-T
Network Protocol
IPv6, IPv4, HTTP, HTTPS, SNMP, QoS/DSCP,
Access list, IEEE 802.1X, RTSP, TCP/ IP, UDP,
SMTP, FTP, PPPoE, DHCP, DDNS, NTP, UPnP,
3GPP, SAMBA, Bonjour
System
Video Resolution
2592x1944@15fps,
2048x1536@15fps,1920x1080@30fps,
1280x720@30fps, 640x480@30fps,

6
320x240@30fps, 176x144@30fps
Video Adjust
Brightness, Contrast, Hue, Saturation,
Sharpness, Shutter Speed adjustable, AGC,
Sense-Up, D-WDR, Flip, Mirror, Noise reduction,
Day&Night adjustable, White Balance
Triple Streaming
Yes
Image snapshot
Yes
Full screen monitoring
Yes
Privacy Mask
Yes, 3 different areas
Compression format
H.264/ M-JPEG/ MPEG4(3GPP only)
Video bitrates adjust
CBR, VBR
Motion Detection
Yes, 3 different areas
Triggered action
Mail, FTP, Save to SD card, DO, SAMBA
Pre/ Post alarm
Yes, configurable
Security
Password protection, IP address filtering, HTTPS
encrypted data transmission, 802.1X port-based
authentication for network protection
Firmware upgrade
HTTP mode, can be upgraded remotely
Simultaneous connection
Up to 10
SD card management
Recording trigger
Motion Detection, IP check, Network break down
(wire only), Schedule, DI
Video format
AVI, JPEG
Video playback
Yes
Delete files
Yes
Client System requirement
OS
Windows 7, 2000, XP, 2003, Microsoft IE 6.0 or
above, Chrome, Safari, Firefox
Mobile Support
iOS 4.3 or above,Android 1.6 or above.
Hardware Suggested
Intel Dual Core 2.8G,RAM: 4GB
*SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTIFICATION.

7
III. Product Installation
A. Monitor Settings
i. Right-Click on the desktop. Select “ Properties”
ii. Change color quality to highest (32bit).

8
B. Hardware Installation

9
1. Dome Installation Steps
a. Use screws to lock the
bottom of camera to the
ceiling or the wall.
b. Use 3-Axis to adjust the
lens angle.
c. Close the dome cover.
d. Tighten the screw on the
cover to fix it.
2. 3-Axis Diagram
Use the 3-Axis bracket to adjust the camera to appropriate angle.

10
3. Connector Instruction
The camera connectors are as below. Connect the power and the
Ethernet cable with the camera, and set it according to your network
environment.