■
EXPLODED VIEW
■ INSTALLATION
SUN SHIELD
WINDOW RING
BODY RING
BASE RING BRACKET VIDEO
POWER
1) Bracket & Camera Mounting
- Affix the bracket to the mounting surface.
- Drill up the supplied screws on the mounting surface through the holes on the bracket.
2) Power Connect & Monitor Impedance
- DC12V/1.5A regulated power supply
- To avoid fire or shock hazard, must use a UL listed power supply.
- Set the monitor impedance switch to 75. Check the impedance switch when the screen turns blurred.
3) Sun-shield Mounting
- Cap over the camera with the sun-shield.
4) Adjust picture direction pan & tilt
- Caution! To avoid smear, never face the camera directly to the strong light source such as sun or spot light.
Long Range IR Camera
