Hunt Electronic HLC-85ED User manual

User Manual
CUBE IP CAMERA

2
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MISTURE.
DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS.
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION：TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
COPYRIGHT
THE TRADEMARKS MENTIONED IN THE MANUAL ARE LEGALLY REGISTERED
TO THEIR RESPECTIVE COMPANIES.

3
Content
I. PREFACE ................................................................................................................4
II. PRODUCT SPECIFICATIONS................................................................................4
III. PRODUCT INSTALLATION...................................................................................7
A. MONITOR SETTINGS ...............................................................................................7
B. HARDWARE INSTALLATION.......................................................................................8
C. IPASSIGNMENT ...................................................................................................12
D. INSTALLACTIVEXCONTROL...................................................................................15
IV. LIVE VIDEO.........................................................................................................23
V. CAMERA CONFIGURATION................................................................................26
A. SYSTEM ..............................................................................................................27
B. NETWORK ...........................................................................................................31
C.A/V SETTING .......................................................................................................57
D. EVENT LIST .........................................................................................................67
VI. NETWORK CONFIGURATION ...........................................................................79
VII. I/O CONFIGURATION........................................................................................81
VIII. FACTORY DEFAULT.........................................................................................84
IX. UNIVERSAL PASSWORD ..................................................................................85
X. PACKAGE CONTENTS........................................................................................88
XI. MICRO SD CARD COMPATIBILITY..................................................................89
V1.0_20140401

4
I. Preface
This is a 1 / 2.7” Mega-Pixel CMOS sensor IP camera with a built-in web server.
The user can view real-time video via IE browser. It supports H.264, and M-JPEG
video compression, providing smooth and high video quality. The video can be
stored in Micro SD card and playback remotely.
With a user friendly interface, it is an easy-to-use IP camera for security
applications.
II. Product Specifications
Full HD 1080P
3D+2D Digital Noise Reduction
Digital Wide Dynamic Range
Adjustable Shutter Speed
Adjustable Sense Up
Manual Day & Night Switch Time Control
PIR supported
WPS supported
Built-in IR, 8 Meters
Power over Ethernet
2-way Audio
H.264/ M-JPEG Compression
Micro SD Card Backup (Optional)
iPhone/Android/Mac supported
SDK for Software Integration
Free Bundle 36 ch Recording Software

5
Hardware
CPU
Multimedia SoC
RAM
256MB
Flash
16MB
Image sensor
1 / 2.7” Mega-Pixel CMOS sensor
Sensitivity
Color : 0.1 Lux (AGC ON)
B / W: 0.05 Lux (AGC ON)
Lens Type
2.8mm @ F2.0
View Angle
111.10°(H), 65.10°(V)
I/O
1 DI / 1 DO
Video Output
N/A
ICR
IR cut filter mechanism
Audio
G.711(64K) and G.726(32K,24K)
Input : Mic built-in
Output : 3.5mm phone jack, or Speaker
Support 2-way audio
PIR
Yes
Power over Ethernet
Yes
Power Consumption
DC 12V Max: 3.6W (IR ON); 2.76W (IR Off)
PoE Max: 4.3W (IR ON); 3.3W (IR Off)
Operating Temperature
0°C ~ 45°C
Dimensions
62mm x 100(mm)x 44(mm)
Weight
230g
IR LEDs
LEDs
4 LEDs, 850nM,
IR distance
8M
Network
Ethernet
10/ 100 Base-T
Network Protocol
IPv6, IPv4, HTTP, HTTPS, SNMP, QoS/DSCP, Access list,
IEEE 802.1X, RTSP, TCP/ IP, UDP, SMTP, FTP, PPPoE,
DHCP, DDNS, NTP, UPnP, 3GPP, SAMBA, Bonjour
Wireless (Optional)
Wireless
802.11b/g/n
WPS
Yes
Security
WEP,WPA-PSK,WPA2-PSK

6
Power Consumption
DC 12V Max: 3.72W (IR ON); 2.76W (IR Off)
System
Video Resolution
1920x1080@30fps, 1280x720@30fps, 640x480@30fps,
320x240@30fps, 176x144@30fps
Video Adjust
Brightness, Contrast, Hue, Saturation, Sharpness, AGC,
Shutter Time, Sense-Up, D-WDR, Anti Fog, Lens
Distortion Correction, Flip, Mirror, Day & Night Adjustable,
Red Gain and Blue Gain, Denoise
Triple Streaming
Yes
Image Snapshot
Yes
Full Screen Monitoring
Yes
Privacy Mask
Yes, 3 different areas
Compression Format
H.264/ M-JPEG
Video Bitrates Adjust
CBR, VBR
Motion Detection
Yes, 3 Different Areas
Triggered Action
Mail, FTP, Save to SD card, Samba, DO
Pre/ Post Alarm
Yes, configurable
Security
Password protection, IP address filtering, HTTPS
encrypted data transmission, 802.1X port-based
authentication for network protection, QoS/DSCP
Firmware Upgrade
HTTP mode, can be upgraded remotely
Simultaneous Connection
Up to 10
Micro SD card management
Recording Trigger
Motion Detection, IP check, Network break down (wire
only),Schedule, DI
Video Format
AVI, JPEG
Video Playback
Yes
Delete Files
Yes
Web browsing requirement
OS
Windows 7, 2000, XP, 2003, Microsoft IE 6.0 or above,
Chrome, Safari, Firefox.
Mobile Support
iOS 4.3 or above, Android 1.6 or above.
Hardware Suggested
Intel Dual Core 2.53G,RAM: 1024MB, Graphic card:
128MB
*SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTIFICATION.

7
III. Product Installation
A. Monitor Settings
1. Right-Click on the desktop. Select Properties
2. Change color quality to highest (32bit).

8
B. Hardware Installation

9
1. Using bracket
Please refer to the picture for camera installation. Use the screws to lock
the bracket to the wall or ceiling, and then connect the camera to the
bracket. There’s a knob on the back of the bracket, after the knob is
loosened you can adjust the angle of camera; tighten it to fix the angle.
2. Connector Instruction
The camera connectors are as below. Connect the power and the
Ethernet cable to the camera and set it according to your network
environment.

10
3. Adjust focus
Use the rotary dial to adjust focus until the image is clear.