Hunt HTC-16GWD28D Manual

INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
◆ Do NOT use power sources other than those specified.
◆ Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
1
WDR True Day&Night Dome Camera

Menu Flow 15
■Setup Page Menu 18
ㆍLENS 19
ㆍPRESETS 18
ㆍWDR 19
ㆍWHITE BALANCE 20
ㆍAGC (Auto Gain Control) 21
ㆍDNR (Digital Noise Reduction) 21
ㆍSENS-UP 22
ㆍEXIT 22
■Advanced Page Menu 27
ㆍVIDEO STANDARD 27
ㆍSYNC 28
ㆍBACKLIGHT 28
ㆍRESOLUTION 27
ㆍSHARPNESS 29
ㆍ APERTURE 29
ㆍRS485 SETUP 30
■Special Page Menu 23
ㆍCAMERA ID 23
ㆍDAY & NIGHT 24
ㆍFLIP 24
ㆍDZOOM 25
ㆍMOTION 25
ㆍPRIVACY MASK SETUP 26
Troubleshooting 31
Specifications 33
3
WDR True Day&Night Dome Camera
2
WDR True Day&Night Dome Camera
■Contents
Components
Features
Names and Functions of Parts
Dimensions
Installation
Cable Connections
■Lens
■OSD
■VBS-EXTRA
■SMPS
■3 Axis Bracket
2
4
9
11
12
12
Installation 14
10
10
11
11
11
Warnings and Precautions 5

5
WDR True Day&Night Dome Camera
4
WDR True Day&Night Dome Camera
■Features Warning ■
Additional Functions
ㆍAutomatic White Balance
ㆍBacklight Compensation
ㆍAutomatic Gain Control
ㆍMotion Detection
ㆍDigital Zoom (x4)
ㆍPrivacy Mask (12 Zone)
The camera requires periodic inspection.
Contact an authorized technician to carry out the inspection.
Stop using your camera when you find it malfunctioning.
If the camera emits smoke or is unusually hot for a long period, a fire may
be caused.
Do not Install the camera on a surface that can not support it.
If the camera is installed on an inappropriate surface, it may fall
and cause injury.
Do not hold plug with wet hands.
It could cause an electric shock.
Do not dis-assemble the camera.
It may result in an electric shock or other hazards.
Do not use the camera close to a gas or oil leak.
It may result in a fire or other hazards.
DNR (Digital Noise Reduction)
The amount of low illuminance noise has been
significantly reduced, and the signal-to-noise
ratio (S/N ratio) as well as horizontal resolution
have been improved, resulting in a clear and
sharp image display even in the dark.
Filter Changeable Day & Night
This camera has a function that automatically
selects the mode that is appropriate for
daytime or night-time conditions.
The COLOR mode operates in daytime
conditions to provide optimum colors and
BW mode operates in nighttime conditions
to enhance the definition of the image.
Wide Dynamic Range (WDR)
The camera delivers clear, high quality pictures
even in backlight, by increasing exposure in
dark areas while decreasing it in bright areas;
a corrected image with clear details results.
ㆍ120dB maximum dynamic range
High Resolution color for crisp,
clear video
ㆍ540TV Line(Color) : High resolution mode
ㆍ 580TV Line(B/W) : High resolution mode
High Sensitivity for low-light
images
The built-in high sensitivity PIXIM BELUGA
C-MOS enables a clear image
ㆍColor : 0.5Lux
ㆍB/W : 0.08Lux
Controlled by OSD Menu
ㆍThe camera can be controlled by selecting
text displayed on the monitor screen.
3 Axis built-in 100mm Dome Housing
RS-485 Communication
Control Support
Remote OSD menu control via an RS-485
interface is supported.

Do not install the camera in
extreme temperature conditions.
Do not install the camera under
unstable lighting conditions.
Do not touch the front lens of the
camera.
Only use the camera under conditions
where temperatures are between
-10˚C and +50˚C. Be especially
careful to provide ventilation when
operating under high temperatures.
It can cause the image quality to be
poor.
Severe lighting change or flicker can
cause the camera to work improperly.
This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.
Do not install or use the camera in an
environment where the humidity is high.
¥If the camera is exposed to spotlight or object reflecting strong light,
smear or blooming may occur.
¥Please check that the power satisfies the normal specification before
connecting the camera.
It can cause malfunctions to occur.
If it gets wet, wipe it dry immediately.
Liquids can contain minerals that
corrode the electronic components.
If exposed to radioactivity the CCD
will fail.
It can damage the CCD.
Do not drop the camera or protect
it from physical shocks.
Do not expose the camera to rain
or spill beverage on it.
Do not expose the camera to
radioactivity.
Never keep the camera pointed
directly at strong light.
7
WDR True Day&Night Dome Camera
6
WDR True Day&Night Dome Camera
■Precautions

■Components Names and Functions of Parts ■
9
WDR True Day&Night Dome Camera
8
WDR True Day&Night Dome Camera
1. COLOR DOME CAMERA
2. SCREWS
3. WIRE FOR VBS-EXTRA
4. INSTRUCTION GUIDE

42.0
38.0
42.0 38.0
11
WDR True Day&Night Dome Camera
10
WDR True Day&Night Dome Camera
②OSD PCB

●SET button : Used for the menu display. This button can be used to
confirm settings after changing the value of the selected function or
current conditions.
●UP & DOWN buttons : Used for selecting items by moving the cursor
up or down on the menu screen.
●LEFT & RIGHT buttons : Used when changing item values, by moving
the cursor to the left or right on the menu screen.
①LENS : Vari-Focal DC Auto Iris Lens
DOWNUPSETRIGHTLEFT
■Names and Functions of Parts Names and Functions of Parts ■
Dimensions ■
③VBS-EXTRA FOR CONNECTING TO LCD
Please use the supplied wire when connecting to external monitor
VBS-EXTRA
④3 AXIS BRACKET
Adjust the pan and tilt to give the correct angle of view.
(unit : mm)
100φ
73.0φ
125.79φ
105.5
55.0

■Installation
1. Dome Base Mounting
- Open the dome cover by loosening 3 screws using special wrench
provided.
- Mount the base of camera to a sturdy surface using 4 screws (1.5
inch) and 4 premade holes on the base of the dome.
2. Power Connect & Monitor Impedance
- DC12V/300mA regulated power supply (DC12V only)
AC24V Class 2 power supply (AC24V/DC12V)
- To avoid fire or shock hazard, must use a UL listed power supply.
- Set the monitor impedance switch to 75Ω. Check the impedance
switch when the screen turns blurred.
3. Camera Module Adjustment
- Loosen screws for 3-axis camera bracket and adjust the direction
and angle of camera.
- Make sure to retighten the screws for camera bracket.
- Set any function you wish to activate by using the OSD buttons.
4. Dome Cover Mounting
- Replace the dome cover to the base and tighten 3 screws.
■Cable Connections
Control via RS-485 Interface
RS-485 Control Port
485 Control Board Connection Port
485+
(+) CONNECTION TERMINAL (TRX+)
(- ) CONNECTION TERMINAL (TRX-)
485-
The camera can be controlled by using external controllers like a Remote controller.
(RS-485 Communication)
• To control using a DVR or System Controller
Connect the RS-485 cable (TRX+, TRX-) to the connection port of the 485
control board that is connected to the DVR or System Controller.
•To control the camera by constructing an additional controller, use
Pelco-D protocol.
(Go Preset 95 : Enters into OSD menu or Set key function)
Note
DOME COVER
GIMBAL A'SSY
BASE HOUSING
DECORATION RING
DC only
AC24V
DC12V AC IN
DC IN AC IN DC IN
VIDEO
POWER
RS-485
13
WDR True Day&Night Dome Camera
12
WDR True Day&Night Dome Camera

15
WDR True Day&Night Dome Camera
14
WDR True Day&Night Dome Camera
Menu Flow ■
■Installation
* When installing on an adapter plate bracket.
① Place the adapter plate bracket on a flat installation surface and fix it with
the screws provided.
② When placing the camera body onto the plate, insert the plate pin into the
corresponding holes on the camera body as shown in figure-1. Lock the
camera in place by turning the camera body clockwise.
③ When placing the camera body on the plate, make sure that the power and
video cables pass through.
④ After installation and adjustment of the camera is complete, secure the dome
cover by turning it clockwise.
Unlocking
direction
Locking
direction
Dome Cover
Unlocking
direction
Locking
direction
Camera Body
3.5x25 tapping
screw (provided)
Adapter Plate
Setup Page Menu
SETUP
LENS DC..
VIDEO..
MANUAL
BIAS, LIMIT
WDR AUTO
HIGH
USER..
LOW
PRESETS WD NORMAL
NORMAL
INDOOR
OUTDOOR
FLUOR1..
FLUOR2..
RED, BLUE
WHITE BAL. ATW..
ATWDes..
AWC..
MANUAL..
AGC MIDDLE
HIGH
OFF
LOW
DNR AUTO
OFF
SENS-UP AUTO..
OFF
SPECIAL..
EXIT

ADVANCED SETUP
RESOLUTION HIGH
NORMAL
VIDEO STANDARD NTSC..
PAL..
BACKLIGHT OFF
ON..
SHARPNESS -8 --------------------- 8
APERTURE -8 --------------------- 8
RS485 SETUP
VERSION (D25_4.3H.DD)
INT
LL..
SYNC
RETURN
17
WDR True Day&Night Dome Camera
16
WDR True Day&Night Dome Camera
■Menu Flow Menu Flow
■
Special Page Menu
SPECIAL
DAY&NIGHT AUTO..
BW
COLOR
CAMERA ID OFF
ON.. ID, Position
FLIP OFF
HORIZ
VERT
BOTH
DZOOM OFF
ON..
PRIVACY MASK SETUP . ..
PRIVACY MASK
MASK COLOR
MOTION OFF
ON..
ADVANCED SETUP..
RESET
RETURN
Advanced Page Menu

PRESETS
SETUP
LENS DC
PRESETS WD NORMAL
NORMAL
INDOOR
OUTDOOR
FLUOR1..
FLUOR2..
WDR AUTO
WHITE BAL. ATW
AGC MIDDLE
DNR AUTO
SENS-UP AUTO
SPECIAL
EXIT
19
WDR True Day&Night Dome Camera
18
WDR True Day&Night Dome Camera
■
Setup Page Menu Setup Page Menu ■
WDR
Wide Dynamic Range is essential for capturing the images at all light levels.
The main function of the WDR is to accumulate the scope of contrast between the
brightest and darkest points in the picture. With the AUTO option, the distribution
of brightness values is automatically adapted to the recording scenario.
ㆍUser can select the desired level
HIGH, USER & LOW, in addition
to automatic adaptation (Auto),
by moving the selector button.
LENS
ㆍLENS
Choose the lens type DC, Video
and Manual lens by using the
selector button.
DC MODE
BIAS
LIMIT
PREVIOUS PAGE
120
-----------
-----------
-18-42 60
0 255
WDR LEVEL
BIAS
PREVIOUS PAGE
-----------
-360 36
LIMIT
-----------
0 3636
SETUP
LENS DC
VIDEO
MANUAL
WDR AUTO
WHITE BAL. ATW
AGC MIDDLE
DNR AUTO
SENS-UP AUTO
SPECIAL
EXIT
PRESETS WD NORMAL
SETUP
LENS DC
PRESETS WD NORMAL
WDR USER
AUTO
HIGH
LOW
WHITE BAL. ATW
AGC MIDDLE
DNR AUTO
SENS-UP AUTO
SPECIAL
EXIT
INDOOR PRESET (TWO)
> RETURN
S-Normal/Shutter Pri
Preference = Shadows
Max DR = 16 bits
ㆍIndoor : Indoor environment.
WD NORMAL PRESET
> RETURN
H-Extra High/Shutter Pri
Preference =Highlights
Max DR = 17 bits
ㆍ WD Normal : WD Normal environment.
OUTDOOR PRESET (THREE)
> RETURN
H-High / Shutter Pri
Preference = Highlights
Max DR = 17 bits
ㆍOutdoor : Outdoor environment.
NORMAL PRESET (ONE)
> RETURN
H-Normal/Shutter Pri
Preference = Highlights
Max DR = 14 bits
ㆍNormal : Normal environment.
FLUORESCENT 1 PRESET
> RETURN.
FLUORESCENT 1
Preference =Highlights
*Line Lock Recommended*
FLUORESCENT 2 PRESET
> RETURN.
FLUORESCENT 2
Preference =Shadows
*DC Iris Only*
ㆍFLUOR1 : Fluor1 environment. ㆍFLUOR2 : Fluor2 environment.

SETUP
LENS DC
PRESETS WD NORMAL
WDR AUTO
WHITE BAL. ATW
AGC MIDDLE
HIGH
OFF
LOW
DNR AUTO
SENS-UP AUTO
SPECIAL
EXIT
21
WDR True Day&Night Dome Camera
20
WDR True Day&Night Dome Camera
■
Setup Page Menu Setup Page Menu ■
ㆍATW (Auto Tracking White Balance)
The ATW mode continuously monitors
color temperature. With WB Control set to ATW, color temperature & White
balance can be automatically adjusted accordingly.
ㆍATWDesat (ATW Desaturating)
When WB is set to ATWDesat, the Extended Color temperature is desaturated
i.e when there is a excess of light temperature, ATWDesat Function is used as
well as it reduces the Noise. The limits of the color temperature setting remain
2000K and 11,000K
ㆍAWC (Auto White Balance)
When set to AWC, Color temperature of the Light is automatically adjusted.
ㆍManual (Manual White Balance)
Manual White Balance (MWB) Mode is used when other White Balance Options
are failed.
WHITE BALANCE
White Balance is a function which compensates different colors of light being
emitted from different light sources.
Users can select the above levels as they desire according to the environment.
ATW CONTROL
PREVIOUS PAGE
LOWLIMIT
HIGHLIMIT
2500
-----------
-----------
85005.5K 11K
2K 5.5K
SETUP
LENS DC
PRESETS WD NORMAL
WDR AUTO
WHITE BAL. ATW
ATWDes
AWC
MANUAL
AGC MIDDLE
DNR AUTO
SENS-UP AUTO
SPECIAL
EXIT
DNR
DNR is Digital Noise Reduction System with a maximum gain of 24 DB.
ㆍAs the level of gain increases, the
screen gets brighter and the level
of noise also increases.
ㆍAUTO
There is a reduction in noise
level with almost no ghost image.
ㆍOFF
There is no reduction in noise
level.
SETUP
LENS DC
PRESETS WD NORMAL
WDR AUTO
WHITE BAL. ATW
AGC MIDDLE
DNR AUTO
OFF
SENS-UP AUTO
SPECIAL
EXIT
Automatic Gain Control is a feature which adjust automatically according to the
incoming Signal. By positioning the arrow to 'AGC' on the SETUP menu with the
help of UP and DOWN buttons, you can select the Mode you wish to go
AGC

■
Setup Page Menu Special Page Menu ■
23
WDR True Day&Night Dome Camera
22
WDR True Day&Night Dome Camera
ㆍPosition the arrow to point to 'SENS UP' on the SETUP menu by using the UP
and DOWN buttons.
ㆍSelect the value required by pressing the LEFT or RIGHT button.
● AUTO : Low light level automatic mode. (X2~X32)
● OFF : The function does not operate.
ㆍPress the SET button when all the settings are complete.
SENS-UP
Sens-up helps maintain a bright, clear screen image by automatically detecting
changes in the level of light in low light level conditions.
EXIT
Saves all the setting menus and then exits.
SENS UP SETUP
SENS-UP X4
PREVIOUS PAGE
SETUP
LENS DC
PRESETS WD NORMAL
WDR AUTO
WHITE BAL. ATW
AGC MIDDLE
DNR AUTO
SENS-UP AUTO
OFF
SPECIAL
EXIT
CAMERA ID
ID CAM-001
POSITION UP-LEFT
PREVIOUS PAGE.
CAMERA ID
ID CAM-001
POSITION UP-LEFT
PREVIOUS PAGE.
ㆍYou can choose the ON and OFF
with the selector. If you select ON,
the entered camera ID is displayed
at the selected position in the video
picture (normal operation).
ㆍ Please select the setup button while
in ON mode.
ㆍSelect the desired position with the
selector.
① Move the cursor to the letter
required by using the Set-Up button.
② Select an ID from A,B~Y,Z, a,b~y,z
0,1~8,9 by using the LEFT and
RIGHT buttons.
③ Repeat the above steps until the ID
is complete.
① Select the position where the ID
is to be displayed by using the
LEFT and RIGHT buttons.
CAMERA ID
User can enter a unique name for the respective camera.
The maximum length of the ID is ten characters.
SPECIAL
CAMERA ID OFF
ON
DAY&NIGHT AUTO
FLIP OFF
DZOOM OFF
OFFMOTION
RESET
RETURN
ADVANCED SETUP
PRIVACY MASK SETUP

25
WDR True Day&Night Dome Camera
24
WDR True Day&Night Dome Camera
■
Special Page Menu Special Page Menu ■
FLIP
Select "OFF" to show the image as normal. Select "ON" to reflect image horizontally.
DAY & NIGHT
This camera has a function that automatically selects the mode that is appropriate
for daytime or night-time conditions. The COLOR mode operates in daytime conditions
to provide optimum colors, and BW mode operates in nighttime conditions to enhance
the definition of the image.
SPECIAL
CAMERA ID OFF
DAY&NIGHT AUTO
BW
COLOR
FLIP OFF
DZOOM OFF
OFFMOTION
RESET
RETURN
ADVANCED SETUP
PRIVACY MASK SETUP
PRIVACY MASK SETUP
SPECIAL
CAMERA ID OFF
DAY&NIGHT AUTO
FLIP OFF
HORIZ
VERT
BOTH
DZOOM OFF
OFFMOTION
RESET
RETURN
ADVANCED SETUP
DAY & NIGHT SETUP
COLOR → BW
BW →COLOR
PREVIOUS PAGE
-----------
220 60
TIME DELAY
-----------
30 20
30
-----------
0 60
PRIVACY MASK SETUP
BOTHVERT
HORIZOFF
MOTION
This product has a feature that allows you to observe movements of objects in
on the screen, hence a single individual can conduct supervision efficiently.
The camera detects an object's movement by sensing disparity of outline,
and level of brightness and color.
DZOOM
Digital P/T/Z are used to create a zoom lens effect. Zoom Factor (1X to 4X)
Pan(±100%, center of image can be moved to left and right edges of screen)
Tilt(±100%, center of image can be moved to top and bottom edges of screen)
SPECIAL
CAMERA ID OFF
DAY&NIGHT AUTO
FLIP OFF
DZOOM OFF
ON
OFF
MOTION
RESET
RETURN
ADVANCED SETUP
ㆍBy Selecting ON, DZoom is
enabled.
ㆍBy Selecting OFF, DZoom is
disabled.
DZOOM
ZOOM
PAN
PREVIOUS PAGE
-----------
-100 100
TILT
-----------
-100
0
0 100
-----------
1 4
MOTION DETECTION
PREVIOUS PAGE
MOTION ZONE..
ACTIVITY THR.
-----------
0 25 255
SPECIAL
CAMERA ID OFF
DAY&NIGHT AUTO
FLIP OFF
DZOOM ON
OFF
OFFMOTION
RESET
RETURN
ADVANCED SETUP
PRIVACY MASK SETUP
PRIVACY MASK SETUP
ㆍ White : MOTION ZONE Position movement
Green : MOTION ZONE Size enlargement
Red : MOTION ZONE Size reduction
ㆍ For MOTION ZONE Confirm, long press SET button
MOTION ZONE SETUP

27
WDR True Day&Night Dome Camera
26
WDR True Day&Night Dome Camera
■
Special Page Menu Advanced Page Menu ■
VIDEO STANDARD
Choose video system between PAL and NTSC by moving the selector.
ADVANCED SETUP
VIDEO STANDARD NTSC
PAL
SYNC INT
HIGH
OFF
SHARPNESS -8 ---------- 8
RS485 SETUP
RETURN
APERTURE -8 ---------- 8
VERSION (D25_4.3H.DD)
RESOLUTION
BACKLIGHT
ADVANCED SETUP
VIDEO STANDARD NTSC
SYNC INT
HIGH
NORMAL
OFF
SHARPNESS -8 ---------- 8
RS485 SETUP
RETURN
APERTURE -8 ---------- 8
VERSION (D25_4.3H.DD)
RESOLUTION
BACKLIGHT
PAL
VIDEO LEVEL
PREVIOUS PAGE.
SYNC LVL
BURST LVL
COLOR BAR OFF
110
-----------
-----------
-----------
80 150
-160 15
-16 15
0
NTSC
VIDEO LEVEL
SETUP
PREVIOUS PAGE.
SYNC LVL
BURST LVL
COLOR BAR OFF
ON
110
-----------
-----------
-----------
80 150
-160 15
-16 15
0
RESOLUTION
ㆍThe high resolution supports
Progressive Rate video up to
540 TV Line and normal resolution
supports 480 TV Line.
Choose resolution between high and normal with the selector (RIGHT/LEFT)
PRIVACY MASK SETUP
Hide an area you want to hide on the screen.
SPECIAL
CAMERA ID OFF
DAY&NIGHT AUTO
FLIP OFF
DZOOM OFF
OFFMOTION
RESET
RETURN
ADVANCED SETUP
PRIVACY MASK SETUP
PRIVACY MASK SETUP
PRIVACY MASK OFF
MASK COLOR WHITE
PREVIOUS PAGE.
ENABLE MASKS (1 to 6)
MASK 1 ON
MASK 2 OFF
MASK 3 OFF
MASK 4 OFF
MASK 5 OFF
MASK 6 OFF
PREVIOUS. NEXT.
ENABLE MASKS (7 to 12)
MASK 7 OFF
MASK 8 OFF
MASK 9 OFF
MASK 10 OFF
MASK 11 OFF
MASK 12 OFF
PREVIOUS.
ㆍWhite : PRIVACY-ZONE Position movement
Blue : PRIVACY-ZONE Size enlargement
or reduction
ㆍFor PRIVACY-ZONE Confirm, long press
SET button

BACKLIGHT
ㆍWhen Backlight is ON, Back Light
gets activated.
ㆍWhite : BL-ZONE Position movement
Green : BL-ZONE Size enlargement
Red : BL-ZONE Size reduction
ㆍFor BL-ZONE Confirm, long press
SET button
Backlight is feature of a Camera which compensates when there is a large
amount of background light.
BL-ZONE
- INT : Internal synchronization
- LL : External line-lock synchronization
ㆍ If 'LL' is selected, it can be adjusted
to the desired phase.
Press the SET button.
ㆍAdjust to the desired phase from
0 to 624.
SYNC
Two synchronization modes are available, INTERNAL and EXTERNAL LINE-
LOCK. In LINE-LOCK mode, it synchronizes the video signal between cameras
without a synchronous generator. The line-lock synchronization is only used in
areas of 60Hz (NTSC) / 50Hz (PAL).
LINE LOCK
V PHASE
PREVIOUS PAGE
519
-----------
0 624
SHARPNESS
The outline of the video image becomes cleaner and more distinctive as the level
of SHARPNESS increases. If the level gose up excessively, however, it may
affect the video image and generate noise.
ㆍThe available range of level is -8 ~ 8
APERTURE
The outline of the video image becomes cleaner and more distinctive as the level
of APERTURE increases. If the level gose up excessively, however, it may affect
the video image and generate noise.
ㆍThe available range of level is -8 ~ 8
ADVANCED SETUP
VIDEO STANDARD NTSC
SYNC INT
HIGH
OFF
ON
SHARPNESS -8 ---------- 8
RS485 SETUP
RETURN
APERTURE -8 ---------- 8
VERSION (D25_4.3H.DD)
RESOLUTION
BACKLIGHT
ADVANCED SETUP
VIDEO STANDARD NTSC
SYNC INT
LL
HIGH
OFF
SHARPNESS -8 ---------- 8
RS485 SETUP
RETURN
APERTURE -8 ---------- 8
VERSION (D25_4.3H.DD)
RESOLUTION
BACKLIGHT
ADVANCED SETUP
VIDEO STANDARD NTSC
SYNC INT
SHARPNESS -8 ---------- 8
RS485 SETUP
RETURN
APERTURE -8 ---------- 8
VERSION (D25_4.3H.DD)
HIGH
RESOLUTION
OFFBACKLIGHT
ADVANCED SETUP
VIDEO STANDARD NTSC
SYNC INT
SHARPNESS -8 ---------- 8
RS485 SETUP
RETURN
APERTURE -8 ---------- 8
VERSION (D25_4.3H.DD)
HIGH
RESOLUTION
OFFBACKLIGHT
29
WDR True Day&Night Dome Camera
28
WDR True Day&Night Dome Camera
■
Advanced Page Menu Advanced Page Menu ■

RS485 SETUP
This function sets up the camera communication status when controlling the camera
through an external control device.
ADVANCED SETUP
VIDEO STANDARD NTSC
SYNC INT
SHARPNESS -8 ---------- 8
RS485 SETUP
RETURN
APERTURE -8 ---------- 8
VERSION (D25_4.3H.DD)
HIGH
RESOLUTION
OFFBACKLIGHT
31
WDR True Day&Night Dome Camera
30
WDR True Day&Night Dome Camera
■
Advanced Page Menu
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an
authorized technician.
Problem
Nothing appears on
the screen.
The image on the
screen is dim.
•Check the power connections.
•Check the VIDEO signal line connection.
• Make sure the lens is clean. Clean the lens with a
soft clean lint free cloth.
•Adjust the monitor contrast & brightness controls.
• Re-position the camera if necessary.
The image on the
screen is dark.
•Adjust the contrast control of the monitor.
•
If you have an intermediate device, set the 75Ω/ Hi-z
properly.
The camera is not working
properly, and the surface
of the camera is hot.
•Check that an appropriate power source is
connected to the camera.
The DAY/NIGHT menu
does not work.
•Check that AGC in the EXPOSURE menu is set
to 'OFF'.
The SENS-UP function
does not work.
•Check that AGC in the EXPOSURE menu is not
set to 'OFF'.
•Check that SHUTTER in the EXPOSURE menu
is not set to 'FLK' or 'MANUAL'.
Solution
Troubleshooting ■
RS485 SETUP
PREVIOUS PAGE
PROTOCOL :
BAUD RATE :
1 < 1 > 255
< 2400 >
< 4800 >
< 9600 >
< 19200 >
PELCO -D
CAMERA # :

33
WDR True Day&Night Dome Camera
32
WDR True Day&Night Dome Camera
ITEM Specifications
Image Sensor
Effective Pixels
Sync System
Electronic Shutter
Main Video Output
Service Monitor Output
Horizontal Resolution
Min. Illumination
Dynamic Range
AGC Control
DNR
Lens
Camera Control&Setup
Power Consumption
Operating Temperature
Operating Humidity
Weight
PIXIM 1/3" C-MOS BELUGA Sensor
720(H) x 540(V)
INT / LL Selectable
up to 1/22,000sec.
1.0 Vp-p Composite, 75 ohm
1.0 Vp-p Composite, 75 ohm
540TV Lines (Color), 580TV Line (B/W) : High resolution mode
0.5Lux (Color), 0.08Lux (B/W)
120dB (max), 102dB (typical)
0~46dB
OFF / AUTO
Vari-Focal DC Auto Iris Lens
OSD Menu
DC12V Only (Max.220mA)
AC24V / DC12V Dual Voltage (Max.240mA / 360mA)
-10℃~ +50℃
Within 90% RH
350g
Specifications ■
■
Troubleshooting
Problem
The Motion Detection
function does not
work.
Color is not correct.
•Check that MOTION DET in the SPECIAL SETUP
is not set to 'OFF'.
• Check the WHITE BAL settings in the SETUP menu.
The screen flickers
continually.
•Check that the camera is not facing toward the
sun.
RS-485
communication fails.
• Check the polarity between the RS-485 Control Port
and the RS-485 cable.
•Check the RS-485 Communication default settings.
*RS-485 Communication default settings are:
Solution
RS-485 Control Port 485 Control Board Connection Port
485+ (+) CONNECTION TERMINAL (TRX+)
(-) CONNECTION TERMINAL (TRX-) 485-
Item
Initial value
BAUD RATECamera ID
1 2400

■
MEMO

Printed in KOREA
Modle : HTC-16GWD28D
WDR True Day&Night Dome Camera
Modle : HTC-16GWD28D
WDR True Day&Night
Dome Camera
Instruction Guide
BELUGA