Hunter 42122 User manual

Owner’s Manual
Models
42122
42123
42177
Form# 44047-01
20120618
©2012 Hunter Fan Co.
English
Non Programmable
INSTALLATION
5 MINUTE

44047-01 • 06/18/2012
2
At A Glance
Know Your ermostat � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3
Setup
Setting Temperature ���������������������������������������������������10
Features
Alerts ������������������������������������������������������������������12
Menu Options ���������������������������������������������������������16
Additional Features ����������������������������������������������������20
ermostat Assistance
Troubleshooting and Support� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �21
Technical Support������������������������������������������������������23
Warranty
1 Year Limited Warranty � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �24
Table of Contents

©2012 Hunter Fan Company 3
If you need any assistance with installion or setup of your new
Hunter Thermostat, please call us, our technical support staff is
ready to help!
USA: 1-888-830-1326
Canada: 1-866-268-1936
Hours of operation are from 7:00 am to 7:00 pm Monday - Friday and 8:00 am
to 5:00 pm on Saturday, Central Time. You may also contact us over the Internet at:
www.HunterFan.com
Read this manual thoroughly. The following notes should help you with getting
around your thermostat:
• The thermostat temperature can be set in increments of 1°F (1°C).
• After 15 minutes without a key press, the thermostat will return to the home
display screen and save any changes you have made.
Know Your ermostat

44047-01 • 06/18/2012
4
1. Allows access to the advanced features of the thermostat and saves changes
to the menu options.
2. Adjusts time and temperature settings as well as moving up or down
menu lists.
3. Indicates whether the system is set to Heat, Cool, or Off.
4. Indicates if the fan is set to Auto or On modes.
5. Allows you to switch between Heat, Cool, and Off modes.
6. Allows you to switch between fan Auto and On modes.
Know Your ermostat

©2012 Hunter Fan Company 5
1
2
4
3
65
Know Your ermostat

44047-01 • 06/18/2012
6
1. Holds 2 “AA” Batteries.
2. HE/HG Switch - allows you to set your furnace to Gas/Oil or Electric, based
on the type of system you have.
3. Allows your thermostat to operate your HVAC system* properly by indicating
the system type that you have.
*Conventional System: Uses a condensing unit for cooling and a
separate furnace system for heating.
*Heat Pump System: Uses the condensing unit for both heating
and cooling.
NOTE: If you are unsure of your system type it may be necessary
to contact our technical support department at 1-888-830-1326, your
HVAC manufacturer, or a local HVAC technician to determine this.
Improper selection of your system type could cause the thermostat to
not operate your system properly.
Know Your ermostat

©2012 Hunter Fan Company 7
1
3
2
Know Your ermostat

44047-01 • 06/18/2012
8
1. Indicates the current room temperature.
2. C will display when in Celsius mode. Nothing will display when set
to Fahrenheit.
3. Low battery warning, replace the batteries in the thermostat.
4. Will show when your heat pump or system is reporting a problem
to the thermostat.
5. Flashes when the furnace lter should be checked for replacement.
6. Indicates auxiliary heat on a heat pump is running.
7. Current operating mode, heat or cool.
8. Current Set temperature the thermostat is scheduled to run.
9. Indicates the fan is running when displayed.
10. Shows the current mode of the fan, Auto or On.
Know Your ermostat

©2012 Hunter Fan Company 9
o
Auto
Filter
o
Heat
Cool to
C
Aux
Sys.
2
3
4
5
78
9
10
1
6
Know Your ermostat

44047-01 • 06/18/2012
10
Once you install the batteries, the thermostat will display the home screen.
1. Set the system switch to Heat or Cool depending on your season.
2. Use the or button to activate the thermostat.
3. Press the or buttons again to adjust your set temperature.
4. Press when nished. The thermostat will show “Updated!” to
conrm your settings are saved.
NOTE: Follow this process anytime you need to make a change to
your temperature.
Setting Temperature