Husqvarna Automower 320 User manual

HUSQVARNA AUTOMOWER®
320/330X
OPERATOR’S MANUAL

English - 1
1 Introduction and safety 3
1.1 Introduction 3
1.2 Symbols on the product 4
1.3 Symbols in the Operator’s Manual 5
1.4 Safety instructions 6
2 Presentation 9
2.1 What is what? 10
2.2 Package content 11
2.3 Function 11
3 Installation 15
3.1 Preparations 15
3.2 Installation of the charging station 16
3.3 Charging the battery 20
3.4 Installation of the boundary wire 21
3.5 Connecting the boundary wire 27
3.6 Installation of the guide wire 28
3.7 Checking the installation 31
3.8 First start-up and calibration 32
3.9 Test docking with the charging station 32
4 Use 33
4.1 Charging a at battery 33
4.2 Using the timer 34
4.3 Starting 34
4.4 Stopping 35
4.5 Switching off 35
5 Control panel 36
5.1 Operation selection Start 37
5.2 Operation selection Parking 38
5.3 Main switch 39
5.4 The charging station’s PARK button 39
6 Menu functions 40
6.1 Main menu 40
6.2 Menu structure 41
6.3 Timer 42
6.4 Cutting height 44
6.5 Security 45
6.6 Messages 47
6.7 Weather timer 48
6.8 Installation 49
6.9 Settings 59
6.10 Accessories 64
7 Garden examples 65
8 Maintenance 70
8.1 Winter storage 71
8.2 Winter service 72
8.3 After winter storage 72
8.4 Cleaning 72
8.5 Transport and moving 73
8.6 In the event of a thunderstorm 73
8.7 Blades 74
8.8 Battery 74
9 Troubleshooting 75
9.1 Fault messages 75
9.2 Info messages 78
9.3 Indicator lamp in the charging station 79
9.4 Symptoms 80
9.5 Finding breaks in the loop wire 82
10 Technical Data 86
11 Guarantee terms 87
12 Environmental information 88
13 EC Declaration of Conformity 89

English - 2
Serial number: ___________________________
PIN code: ___________________________
Dealer: ___________________________
Dealer’s
telephone number: __________________________
If the robotic lawnmower is stolen, it is important to notify Husqvarna Group AB of this. Contact your local dealer
and provide the product’s serial number so that it can be registered as stolen in an international database. This is an
important step in the robotic lawnmower’s theft protection which reduces interest in the buying and selling of stolen
robotic lawnmowers.
The product’s serial number consists of nine digits and is shown on the product rating plate (found on the inside of the
display cover) and the product’s packaging.
www.automower.com
MEMO

English - 3
INTRODUCTION AND SAFETY
1 Introduction and safety
1.1 Introduction
Congratulations on your choice of an exceptionally
high quality product. To get the best results from your
Husqvarna robotic lawnmower requires knowledge of
how it works. This Operator’s Manual contains important
information about the robotic lawnmower, how it must be
installed and how to use it.
As a complement to this Operator’s Manual, there is
more information available on the Automower® website,
www.automower.com. Here you can nd more help and
guidance in its use.
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify
the design, appearance and function of products without
prior notice.
The following system is used in the Operator’s Manual
to make it easier to use:
• Text written in italics is a text that is shown on the
robotic lawnmower’s display or is a reference to
another section in the Operator’s Manual.
• Words written in bold are one of the buttons on the
robotic lawnmower’s keypad.
• Words written in UPPERCASE and italics refer to the
position of the main switch and the different operating
modes available in the robotic lawnmower.
www.automower.com
IMPORTANT INFORMATION
Please read the Operator’s Manual
carefully and make sure you understand
the instructions before using the robotic
lawnmower.
WARNING
The robotic lawnmower can be
dangerous if used incorrectly.
1001-003

English - 4
INTRODUCTION AND SAFETY
1.2 Symbols on the product
These symbols can be found on the robotic lawnmower.
Study them carefully.
• Please read the Operator’s Manual carefully and
make sure you understand the instructions before
using the robotic lawnmower. The warnings and
safety instructions in this Operator’s Manual must be
carefully followed if the robotic lawnmower is to be
used safely and efciently.
• The robotic lawnmower can only start when the main
switch is set to 1and the correct PIN code has been
entered. Turn the main switch to 0before carrying out
any inspections and/or maintenance.
• Remain at a safe distance from the robotic
lawnmower when it is running. Keep your hands and
feet away from the rotating blades. Never put your
hands or feet close to or under the body when the
robotic lawnmower is running.
• Do not ride on the robotic lawnmower.
• This product conforms to the applicable EC
Directives.
• Noise emission to surroundings. The product’s
emissions are set out in chapter 10, Technical data
and on the rating plate.
• It is not permitted to dispose of this product as normal
household waste when it has reached the end of
its useful life. Ensure that the product is recycled in
accordance with local legal requirements.
• Never use a high-pressure washer or even running
water to clean the robotic lawnmower. 3018-062
3012-689
6001-024
3012-665
3018-066
3012-663, 3012-1085
1001-002, 1001-003
3012-1059

English - 5
INTRODUCTION AND SAFETY
• The chassis contains components which are
sensitive to electrostatic discharge (ESD). The
chassis is also a signicant part of the robotic
lawnmower’s design and must be resealed in
a professional manner if the product is to be used
outdoors. For this reason the chassis can only be
opened by authorised service technicians. A broken
seal can result in the entire or parts of the guarantee
no longer being valid.
1.3 Symbols in the Operator’s Manual
These symbols can be found in the Operator’s Manual.
Study them carefully.
• Turn the main switch to 0before carrying out any
inspections and/or maintenance.
• Always wear protective gloves when working with the
robotic lawnmower’s chassis.
• Never use a high-pressure washer or even running
water to clean the robotic lawnmower.
• A warning box indicates the risk of personal injury,
especially if the instructions are not followed.
• An information box indicates the risk of material
damage, especially if the instructions are not
followed. The box is also used where there is
a risk of user error.
WARNING
Text
IMPORTANT INFORMATION
Text
3012-272
3018-062
3012-1097
3012-1060

English - 6
INTRODUCTION AND SAFETY
1.4 Safety instructions
Use
• This robotic lawnmower is designed to mow grass in
open and level ground areas. It may only be used with
the equipment recommended by the manufacturer. All
other types of use are incorrect. The manufacturer’s
instructions with regard to operation/maintenance and
repair must be followed precisely.
• The robotic lawnmower may only be operated,
maintained, and repaired by persons that are fully
conversant with its special characteristics and
safety regulations. Please read the Operator’s
Manual carefully and make sure you understand the
instructions before using the robotic lawnmower.
• It is not permitted to modify the original design of the
robotic lawnmower. All modications are made at your
own risk.
• Check that there are no stones, branches, tools,
toys or other objects on the lawn that can damage
the blades. Objects on the lawn can also lead to the
robotic lawnmower getting stuck in them and help may
be required to remove the object before the mower
can continue mowing.
• Start the robotic lawnmower according to the
instructions. When the main switch is set to 1; make
sure to keep your hands and feet away from the
rotating blades. Never put your hands and feet under
the robotic lawnmower.
• Never lift up the robotic lawnmower or carry it around
when the main switch is in position 1.
• Do not let persons who do not know how the robotic
lawnmower works and behaves use it.
• Never use the robotic lawnmower if persons, especially
children, or pets, are in the immediate vicinity.
• Do not put anything on top of the robotic lawnmower
or its charging station.
• Do not allow the robotic lawnmower to be used with
a defective blade disc or body. Neither should it be
used with defective blades, screws, nuts or wires.
• Do not use the robotic lawnmower if the main switch
does not work.
• Always switch off the robotic lawnmower using the main
switch when the robotic lawnmower is not in use. The
robotic lawnmower can only start when the main switch
is set to 1and the correct PIN code has been entered.
• The robotic lawnmower must never be used at the
same time as a sprinkler. In this case use the timer
function (see 6.3 Timer on page 6) so the mower and
sprinkler never run simultaneously.
1001-003
3012-1057
3012-663

English - 7
INTRODUCTION AND SAFETY
• Husqvarna AB does not guarantee full compatibility
between the robotic lawnmower and other types
of wireless systems such as remote controls, radio
transmitters, hearing loops, underground electric
animal fencing or similar.
Moving
The original packaging should be used when transporting
the robotic lawnmower over long distances.
To safely move from or within the working area:
1. Press the STOP button to stop the robotic
lawnmower. If security is set to the medium or
high level (see 6.5 Security on page 45.) the PIN
code has to be entered. The PIN code has four
digits and is chosen when the robotic lawnmower
is started for the rst time, see 3.8 First start-up
and calibration on page 32.
2. Set the main switch to position 0.
3. Carry the robotic lawnmower by the handle
found at the rear of the product. Carry the robotic
lawnmower with the blade disc away from the body.
IMPORTANT INFORMATION
Do not lift the robotic lawnmower when
it is parked in the charging station. It
can damage the charging station and/or
the robotic lawnmower. Press STOP and
instead rst pull the robotic lawnmower
out of the charging station before lifting it.
3012-1044
3012-1060
3012-1203

English - 8
INTRODUCTION AND SAFETY
Maintenance
WARNING
When the robotic lawnmower
is turned upside down the main
switch must always be in the 0
position.
The main switch should be set
in the 0position during all work
on the mower’s chassis, such as
cleaning or replacing the blades.
Inspect the robotic lawnmower each week and replace
any damaged or worn parts. The following must be carried
out in the weekly inspections:
• Clean the charging station from grass, leaves,
twigs and other objects that may impede the robotic
lawnmower from docking with the charging station.
• Set the main switch to position 0and put on a pair of
protective gloves. Turn the robotic lawnmower upside
down. Check the following:
1. Clean the drive wheels. Grass in the drive wheels
can impact on how the lawnmower works on
slopes.
2. Clean the front wheels. Grass on the front wheels
and the front wheel axles can affect performance.
3. Clean the body, chassis and cutting system.
Grass, leaves and other objects that weigh down
the product affect performance.
4. Check that all mower blades are intact. Check
also that the mower blades can pivot freely. Even
if the mower blades are intact, they must be
replaced on a regular basis for the best mowing
result and low energy usage. Replace all blades
and screws at the same time if necessary so that
the rotating parts are kept balanced. See 8.7
Blades on page 74.
3012-1060
3012-1257