Husqvarna Rider ProFlex 21 II User manual

Operator´s manual
Rider ProFlex 21 II
Please read these instructions carefully and make sure
you understand them before using the machine. English

Svenska – 31
Sve-5 225/232/235 Bruk 97-11-25, 08.4631

English-1
Contents
Contents...................................................................1
For Your Own Safety ...........................................2
Introduction .............................................................3
Driving and Transport on Public Roads ...............3
Towing .................................................................3
Use.......................................................................3
Proper Service .....................................................4
Serial Number......................................................4
Symbols and Decals ...............................................5
Safety Instructions..................................................7
General Use.........................................................7
Driving on Slopes.................................................9
Children..............................................................10
Maintenance ......................................................10
Transport............................................................12
Presentation .........................................................13
Placement of Controls........................................13
Throttle Control ..................................................14
Choke Lever.......................................................14
Accelerator.........................................................14
Cutting Unit ........................................................15
Accessories........................................................15
Hydraulic Lifting Lever for the Cutting Unit ........15
Mechanical Lifting Lever for the Cutting Unit .....16
Cutting Height Adjustment Lever .......................17
Parking Brake ....................................................17
Seat....................................................................17
Fuelling ..............................................................17
Differential Lock .................................................18
Clutch Control ....................................................18
Chronometer......................................................18
Driving....................................................................19
Before Starting...................................................19
Starting the Engine ............................................19
Driving the Rider ................................................20
Differential Lock .................................................21
Mowing Tips.......................................................22
Stopping the Engine...........................................23
Clutch Control ....................................................24
Maintenance ..........................................................25
Maintenance Schedule ......................................25
Removing the Rider’s Covers ............................27
Checking the Engine's Cooling Air Intake..........28
Checking the Transmission Air Intake ...............28
Checking and Adjusting the Steering Cables.....29
Checking and Adjusting the Throttle Cable........30
Checking and Adjusting the Choke Cable .........30
Adjusting of the Differential Lock .......................30
Adjusting of the Hydrostatic Transmission Cable.... 31
Cable Seat ........................................................ 31
Adjusting the Brake........................................... 32
Checking the Tyre Pressures............................ 32
Replacing the Air Filter...................................... 33
Replacing the Fuel Filter ................................... 34
Cleaning the Pulse Air Filter.............................. 34
Checking the Fuel Pump’s Air Filter.................. 34
Checking the Battery Acid Level ....................... 35
Ignition System.................................................. 35
Main Fuse ......................................................... 36
Checking the Safety System............................. 36
The Cutting Unit Components........................... 37
Attaching the Cutting Unit ................................. 37
Adjusting the Unit’s Parallelism
and Cutting Height ............................................ 39
Parallelism......................................................... 39
Cutting Height ................................................... 39
Checking and Adjusting the Ground Pressure ......40
The Cutting Unit’s Service Position................... 40
Checking the Blades ......................................... 41
Cutting Unit Model............................................. 41
Removing the Cutting Unit ................................ 42
Removing the Cutting Unit Frame..................... 44
Removing the Belt............................................. 44
Attaching the Belt.............................................. 45
Changing the Cutting Unit’s Belt ....................... 46
Removing the BioClip Plug (Combi).................. 46
Lubrication............................................................ 47
Lubrication Schedule......................................... 47
General ............................................................. 48
Lubricating the Cables ...................................... 48
Lubricating in Accordance with
the Lubrication Schedule................................... 48
Trouble Shooting Guide ...................................... 55
Problem............................................................. 55
Storage.................................................................. 57
Winter Storage .................................................. 57
Service .............................................................. 58
Electrical and Hydraulic Systems....................... 59
Technical Data...................................................... 61
Rider ProFlex 21 II ............................................ 61
Cutting Unit ....................................................... 62
EU Declaration of Conformity ............................. 63
Service journal ..................................................... 65
Delivery Service ................................................ 65
After the first 8 hours......................................... 65
25-Hour Service ................................................ 66
50-Hour Service ................................................ 67
100/200-Hour Service ....................................... 68
300-Hour Service .............................................. 69
At Least Once Each Season............................. 70
Operator’s Manual for
Rider ProFlex 21 II

English-2
For Your Own Safety
Insure your Rider
• Check the insurance
• Contact your insurance company
• You should have fully comprehensive insurance
for: Traffic-Fire-Damage-Theft.
IMPORTANT INFORMATION
Read carefully through the Operator’s manual so that you know how to use and maintain the Rider
before you use it.
For service measures other than those described in this manual, please contact an authorised
dealer that provides parts and service.

English-3
INTRODUCTION
Introduction
Congratulations
Thank you for purchasing a Husqvarna Rider. Husqvarna Riders have been designed according to a unique
concept with a front mounted cutting unit and patented rear wheel steering. The Rider is built to give
maximum efficiency even in small and confined areas. All controls in one place and a hydrostatic
transmission regulated by foot pedals also contribute to the machine’s performance.
This operator’s manual is a valuable document. Following the instructions (use, service, maintenance, etc.)
can considerably increase the life span of your machine and even increase its resale value.
When you sell your Rider, make sure to give the operator’s manual to the new owner.
The final chapter of this operator’s manual comprises a Service Journal. Ensure that service and repair
work is documented. A well-kept service journal reduces service costs for the season-based maintenance
and affects the machine’s resale value. Take the operator’s manual along when the Rider is left to the
workshop for service.
Driving and Transport on Public Roads
Check applicable road traffic regulations before driving and transport on public roads.You should always
use approved fasteners during transport and ensure that the machine is well secured.
Towing
Your machine is equipped with a hydrostatic transmission and, if necessary, you ought only tow the
machine over short distances and at a low speed, otherwise there is a risk of damaging the transmission.
The power transmission must be disengaged when towing, see Clutch Control on page 18.
Use
This machine is constructed only for cutting grass on normal lawns and other free and even ground without
obstacles such as stones, tree stubs, etc., even when the machine is equipped with special accessories
provided by the manufacturer, for which the operating instructions are provided in conjunction with delivery.
All other types of use are incorrect. The manufacturer’s instructions with regard to driving, maintenance,
and repair must be followed precisely.
The machine may only be operated, maintained, and repaired by persons that are fully conversant with the
machine’s special characteristics and safety regulations.
Accident prevention regulations, other general safety regulations, occupational safety rules, and traffic
regulations must be observed.
Unauthorised modifications to the design of the machine may absolve the manufacturer from liability for any
resulting personal injury or property damage.

English-4
INTRODUCTION
Proper Service
Husqvarna’s products are sold all over the world and only by specialised retail traders offering complete
service. This ensures that you as a customer receive only the best support and service. Before the product
is delivered, the machine has, for example, been inspected and adjusted by your retailer, see the certificate
in the Service Journal in this operator’s manual.
When you need spare parts or support concerning service, warranty issues, etc., please consult the
following professional:
Serial Number
The serial number can be found on the printed plate attached to the front, left-hand side under the seat.
Stated on the plate, from the top, are:
• The machines type designation.
• The manufacturer's type number.
• The machine's serial number.
Please state the type designation and serial number when ordering spare parts.
The engine’s serial number is stated on a barcode decal. This is placed on the left side of the crankcase,
in front of the starter. The plate states:
• The engine’s serial number (E/NO).
• Code.
Please state these when ordering spare parts.
The transmission's serial number is stated on the barcode decal located on the front of the housing on the
left-hand drive axle:
• The type designation is stated above the barcode and starts with the letter K.
• The serial number is stated above the barcode and has the prefix s/n.
• The manufacturer’s type number is stated under the barcode and has the prefix p/n.
Please state the type designation and serial number when ordering spare parts.
This operator’s manual belongs to the
machine bearing serial number:
Engine Transmission

English-5
EXPLANATION OF SYMBOLS
Symbols and Decals
These symbols can be found on the rider and in the operator’s manual.
Study them carefully so that you know what they mean.
Read the operator’s manual.
Parking
brake
CE conformity
marking
FuelChokeSlowFastNeutralReverse Engine off Battery
Oil level Cutting height Reversing Forward Ignition
Hydrostatic free
wheeling
Use hearing
protection
Brake Warning
Noise emission to surround-
ings in accordance with the di-
rective of the European
C
ommunity. The machine’s
e
mission is indicated in the
T
ECHNICAL DATA chapter
and on the decal.
Warning!
Rotating blades Warning! Risk of the
Rider overturning Never drive directly
across a slope
Never use the Rider if persons,
especially children or pets, are in
the immediate vicinity.
Never carry passengers on
the Rider or on its tools
Do not insert your
hands or feet under
the cover when the
engine is running
Drive very slowly
without the cutting
unit
Starting instructions
Read the operator’s manual
Check the engine oil level
Check the oil level in the hydrostat
Lift up the cutting unit
Put the hydrostat pedals in the neutral
position
Brake
Use the choke if the engine is cold
Start the engine
Disengage the parking brake before
driving
Accelerator pedal forward
Neutral position
Accelerator pedal reversing
Switch off the engine and
remove the ignition cable
before carrying out repairs
or maintenance

English-6
EXPLANATION OF SYMBOLS
Used in this publication to notify the reader of a risk of personal injury, particularly if the reader should
neglect to follow instructions given in the manual.
Used in this publication to notify the reader of a risk of material damage, particularly if the reader should
neglect to follow instructions given in the manual. Used also when there is a potential for misuse or
misassembly.
Avoid hosing the decals with high pressure washers. Replace damaged decals before the machine is used.
WARNING!
Xxxxxxx xxxx xxxxxxxx xxx x
Xxxxx xxxxxx xx.
xx xxxxxxxx xxxxx xxx xx.
!
IMPORTANT INFORMATION
Xxxxxxx xxxx xxxxxxxx xxx xxx
xxxx xxxxxx xx.

English-7
SAFETY INSTRUCTIONS
Safety Instructions
These instructions are for your safety. Read them carefully.
General Use
• Read all instructions in this operator’s
manual and on the machine before
starting it. Ensure you understand them
and then observe them.
• Learn how to use the machine and its
controls safely and learn how to stop
quickly. Also learn to recognise the safety
decals.
• Only allow the machine to be used by
adults who are familiar with its use.
• Make sure nobody else is in the vicinity
of the machine when you start the
engine, engage the drive, or run the
machine.
• Make sure animals and people maintain
a safe distance from the machine.
• Stop the machine if someone enters the
work area.
• Clear the area of objects such as stones,
toys, steel wire, etc. that may become
caught in the blades and thrown out.
• Beware of the discharge deck and do not
point it at any one.
• Stop the engine and prevent it from
starting before you clean the discharge
deck.
• Remember that the driver is responsible
for dangers or accidents.
• Never take passengers. The machine is
only intended to be used by one person.
• Always look down and behind before and
during reversing manoeuvres. Keep
watch for both large and small obstacles.
• Slow down before turning.
• Shut down the blades when not mowing.
WARNING!
The inserted symbol means that important safety instructions needed to be observed.
It applies to your safety.
!
8010-047
Read the operator’s manual before starting the machine.
6003-002
Clear the area of objects before mowing.
8010-052
Never take passengers.
WARNING!
This machine can sever hands and feet as well as throw objects.
Failure to observe the safety instructions can result in serious injuries.
!

English-8
SAFETY INSTRUCTIONS
• Be careful when rounding fixed objects,
so that the blades do not hit them. Never
run the machine over foreign objects.
• Only use the machine in daylight or in
other well-lit conditions. Keep the
machine at a safe distance from holes or
other irregularities in the ground. Pay
attention to other possible risks.
• Never use the machine if you are tired, if
you have consumed alcohol, or if you are
taking other drugs or medication that can
affect your vision, judgment, or co-
ordination.
• Beware of traffic when working near or
crossing a road.
• Never leave the machine unsupervised
with the engine running. Always stop the
blades, apply the parking brake, stop the
engine and remove the keys before
leaving the machine.
• Never allow children or other persons not
trained in the use of the machine to use
or service it. Local laws may regulate the
age of the user.
• Make sure that you have first aid
equipment close at hand when using the
machine.
• Never use the machine when barefoot.
Always wear protective shoes or
protective boots, preferably with steel
toes.
• Always wear approved protective
glasses or a full visor when assembling
or driving.
• Never wear loose clothing that can
fasten in moving parts.
• Use hearing protection when driving the
machine. Consult your dealer
concerning the appropriate protection
level.
!WARNING!
Engine exhaust, some of its
constituents and certain vehicle
components contain or emit
chemicals considered to cause
cancer, birth defects or other
reproductive impairment.The
engine emits carbon monoxide,
which is a colourless, poisonous
gas. Do not use the machine in
enclosed spaces.
6003-006
Keep children away from the area to be mowed.
!WARNING!
You must use approved personal protective equipment whenever you use the
machine. Personal protective equipment cannot eliminate the risk of injury but it
will reduce the degree of injury if an accident does happen. Ask your dealer for help
in choosing the right equipment.
8011-292
Personal protective equipment.

English-9
SAFETY INSTRUCTIONS
Driving on Slopes
Driving on slopes is one of the operations
where the risk of the driver losing control of
the machine or of it overturning is the
greatest; this can result in serious injury or
death. All slopes demand extra care. If you
cannot reverse up a slope or if you feel
unsure, do not mow it.
Do as follows
• Remove obstacles such as stones, tree
branches, etc.
• Mow up and down, not side-to-side.
• Never drive the machine on terrain that
slopes more than 15°.
• Avoid starting or stopping on a slope. If
the tyres start to slip, stop the blades and
drive slowly down the slope.
• Always drive evenly and slowly on
slopes.
• Make no sudden changes in speed or
direction.
• Avoid unnecessary turns on slopes, and
if it proves necessary, turn slowly and
gradually downward, if possible.
• Watch out for and avoid driving over
furrows, holes, and bumps. It is easier for
the machine to overturn on uneven
ground. Tall grass can hide obstacles.
• Drive slowly. Do not turn the wheel
sharply.
• Be extra cautious with any additional
equipment, which can alter the
machine’s stability.
• Do not mow near verges, ditches, or
banks. The machine can suddenly
overturn if one wheel comes over the
edge of a steep slope or a ditch, or if an
edge gives way.
• Do not mow wet grass. It is slippery, and
tyres can lose their grip so that the
machine skids.
• Try not to stabilise the machine by
putting a foot on the ground.
• When cleaning the chassis, the machine
may never be driven near verges or
ditches.
• Follow the manufacturer’s
recommendations regarding wheel
weights or counterbalance weights to
increase machine stability.
6003-004
Mow upwards and downwards on slopes, not
sideways.
8010-054
Be extra cautious when driving on slopes.
IMPORTANT INFORMATION
Do not drive down slopes with the unit
raised.
IMPORTANT INFORMATION
Wheel weights fitted on the rear wheels
are recommended when driving on slopes
for safer steering and improved
manoeuvrability.
Consult your dealer concerning the use of
wheel weights if you are unsure.

English-10
SAFETY INSTRUCTIONS
Children
• Serious accidents may occur if you fail to
be on guard for children in the vicinity of
the machine. Children are often attracted
to the machine and mowing. Never
assume that children will stay put where
you last saw them.
• Keep children away from the mowing
area and under close supervision by
another adult.
• Keep an eye out and shut off the
machine if children enter the work area.
• Before and during a reversing
manoeuvre, look backward and
downward for small children.
• Never allow a child to ride with you. They
can fall off and seriously injure
themselves or be in the way for safe
manoeuvring of the machine.
• Never allow children to operate the
machine.
• Be particularly careful near corners,
bushes, trees or other objects that block
your view.
Maintenance
• Stop the engine. Prevent the engine from
starting by removing the spark plug
cables from the spark plugs or by
removing the ignition key before making
any adjustments or performing
maintenance.
• Never fill the fuel tank indoors.
• Petrol and petrol fumes are poisonous
and extremely flammable. Be especially
careful when handling petrol, as
carelessness can result in personal
injury or fire.
• Only store fuel in containers approved
for the purpose.
• Never remove the fuel cap or fill the fuel
tank while the engine is running.
• Allow the engine to cool before
refuelling. Do not smoke. Do not fill
petrol in the vicinity of sparks or naked
flames.
8010-057
Never allow children to operate the machine.
8010-058
Never fill the fuel tank indoors.

English-11
SAFETY INSTRUCTIONS
• If leaks arise in the fuel system, the
engine must not be started until the
problem has been resolved.
• Store the machine and fuel in such a way
that there is no risk of leaking fuel or fuel
vapour leading to damages.
• Check the fuel level before each use and
leave space for the fuel to expand,
because the heat from the engine and
the sun may otherwise cause the fuel to
expand and overflow.
• Avoid overfilling. If you spill petrol on the
machine, wipe up the spill and wait until it
has evaporated before starting the
engine. If you spill petrol on your
clothing, change your clothing.
• Allow the machine to cool before taking
any actions in the engine room.
• Be especially careful when handling
battery acid. Acid on the skin can cause
serious corrosive injuries. In the event of
spillage on the skin wash immediately
with water.
• Acid in the eyes can cause blindness,
contact a doctor immediately.
• Be careful when servicing the battery.
Explosive gases form in the battery.
Never perform maintenance on the
battery while smoking or in the vicinity of
open flames or sparks. This can cause
the battery to explode and cause serious
injuries.
• Make sure all nuts and bolts are
tightened correctly and that the
equipment is in good condition.
• Do not modify safety equipment. Check
regularly to be sure it works properly.The
machine must not be driven if protective
plates, protective covers, safety switches
or other protective devices are not fitted
or are defective.
• Do not change the settings of governors
and avoid running the engine with overly
high engine speeds. If you run too fast,
you risk damaging the machine
components.
!WARNING!
The engine, and components of the
exhaust and hydraulic systems
become extremely hot during
operation. Risk of burn injuries if
touched.
WARNING!
The battery contains lead and lead
compounds, chemicals that are
considered to cause cancer, birth
defects, and other reproductive
system damage. Wash you hands
after touching the battery.
!
6003-009
Do not smoke when carrying out maintenance.

English-12
SAFETY INSTRUCTIONS
• Never use the machine indoors or in
spaces lacking proper ventilation.
Exhaust fumes contain carbon
monoxide, an odourless, poisonous and
highly dangerous gas.
• Stop and inspect the equipment if you
run over or into anything. If necessary,
make repairs before starting.
• Never make adjustments with the engine
running.
• The machine is tested and approved
only with the equipment originally
provided or recommended by the
manufacturer.
• The blades are sharp and can cause
cuts and gashes. Wrap the blades or
wear protective gloves when handling
them.
• Check the parking brake’s functionality
regularly. Adjust and maintain as
required.
• The mulching unit should only be used
where better quality mowing is required
and in known areas.
• Reduce the risk of fire by removing
grass, leaves and other debris that may
have fastened in the machine. Allow the
machine to cool before putting it in
storage.
Transport
• The machine is heavy and can cause
serious crush injuries. Be especially
careful when it is loaded in or out of a car
or on and off of a trailer.
• Use an approved trailer to transport the
machine. Activate the parking brake,
shutoff the fuel supply and secure the
machine using approved fasteners, such
as tension belts, chains or ropes when
transporting.
• Check and abide by local traffic
regulations before transporting or driving
the machine on any road.
8010-060
Never drive the machine in an enclosed space.
8010-061
Regularlycleangrass,leavesandotherdebrisfromthe
machine.
IMPORTANT INFORMATION
The parking brake is not sufficient to lock
the machine during transport. Ensure you
secure the machine firmly to the
transporting vehicle.

English-13
PRESENTATION
Presentation
This operator’s manual describes the Rider ProFlex 21 II.
The Rider ProFlex 21 II is fitted with a Kawasaki four-stroke V-Twin engine developing 21 horse power.
Power transmission from the engine is via a hydrostatic gearbox that allows variable speed controlled by
the foot pedals. One pedal to drive forwards and one pedal to reverse.
The machine is equipped with servo steering and hydraulic lifts, powered by the gearbox.
8009-318
8009-319
Placement of Controls
1. Ignition lock 9. Accelerator for driving forwards
2. Choke lever 10. Parking brake pedal
3. Throttle control – regulates the engine speed 11. Lock button for parking brake
4. Chronometer 12. Differential lock pedal
5. Hydraulic lifting lever for cutting unit 13. Seat adjustment lever
6. Cutting height adjustment lever 14. Fuel cap
7. Mechanical lifting lever with lock button for unit 15 Cover lock
8. Accelerator for reversing 16. Clutch control

English-14
PRESENTATION
Throttle Control
The throttle is used to control the speed of
the engine and thereby also the rotation
speed of the blades.
In order to increase or decrease the engine
speed, the control is moved forwards or
backwards respectively.
Avoid idling the engine for long periods, as
there is a risk of carbon build-up on the spark
plugs.
Choke Lever
The choke lever is used for cold starts in
order to provide the engine with a richer fuel
mixture.
For cold starts, the lever shall be moved
backwards to its endpoint.
Accelerator
The speed of the machine is variably
controlled using two pedals. Pedal (1) is used
to travel forwards and pedal (2) to reverse.
8009-320
8009-321
1
2
6004-206
!WARNING!
Make sure that no branches can
interfere with the pedals when
mowing under bushes.
Risk for unintentional
manoeuvring.

English-15
PRESENTATION
Cutting Unit
As standard, the Rider ProFlex 21 II is fitted with a Combi 122 cutting unit with a cutting width of 122 cm.
The Combi unit functions as a BioClip unit when a BioClip plug is fitted, but can be set to rear ejection by
removing the BioClip plug.
The unit’s BioClip function finely chops the grass several times before returning it to the lawn as fertiliser.
The rear ejector ejects the clippings behind the unit without finely chopping them.
Accessories
The accessories are described in separate operator’s manuals. Contact your dealer if you require an
accessory.
A selection of the available Rider ProFlex 21 II accessories:
• Brush
• Snow Blade
• Wheel Weights
• Snow Chains
• Dutch Hoe
• Edge Trimmer
• Gravel Harrow
• Trailer
• Spreader
Hydraulic Lifting Lever for the Cutting Unit
The lifting lever is used to put the cutting unit
in either the transport or mowing position
when hydraulic pressure is available.
In the transport position, the blade brake is
automatically activated so that the blades
stop within about five seconds.
Lifting the cutting unit (transport position)
Pull the lever backwards to engage the
transport position.
The unit is raised and the blades stop rotating.
Secure the cutting unit if necessary using the
mechanical lifting lever.
Lowering the unit (mowing position)
If the cutting unit is secured in the transport
position using the mechanical lifting lever,
move the mechanical lifting lever to the
cutting position.
Move the hydraulic lifting lever forwards to
engage the cutting position. The unit is
lowered and the blades begin to rotate.
In order to ensure that the hydraulic cylinder
is in the outer position, hold the lever in the
forward position for a half to one second.
8009-323
Raising the cutting unit with the hydraulic lifting
lever
8009-325
Lowering the unit with the hydraulic lifting lever

English-16
PRESENTATION
Mechanical Lifting Lever for the Cutting Unit
The lever is used as a backup lever to put the
cutting unit in either the transport or mowing
position when hydraulic pressure is
unavailable. It can also be used to
mechanically secure the cutting unit in the
transport position.
The lever must be used when starting the
engine, if the engine stopped with the unit in
the mowing position, in order to raise the unit
so that the start lock circuit is disengaged.
In the transport position, the blade brake is
automatically activated so that the blades
stop within about five seconds.
Transport Position
Pull the lever backwards to the locked
position to engage the transport position.
The unit is raised and the blades stop
rotating.
Mowing Position
Depress the lock button and move the lever
forwards to engage the mowing position.
The unit is lowered and the blades begin to
rotate.
8009-322
Raising the cutting unit with the mechanical
lifting lever
8009-324
Lowering the unit with the mechanical lifting lever

English-17
PRESENTATION
Cutting Height Adjustment Lever
Using the cutting height lever, the cutting
height can be adjusted between 7 different
positions.
In order to obtain an equal cutting height, it is
important that the air pressure is the same in
both front wheels (60 kPa).
Parking Brake
The parking brake is activated as follows:
1. Press the brake pedal.
2. Completely depress the lock button on
the steering servo housing.
3. Release the brake pedal while keeping
the button pressed in.
The parking brake lock is automatically
disengaged when the brake pedal is pressed
down.
Seat
The seat has a hinged mounting on the front
edge and can be folded forwards.
The seat can also be adjusted lengthways.
When making adjustments, the lever under
the front edge of the seat is moved to the left,
after which the seat can be moved backwards
or forwards to the desired position.
Fuelling
The engine shall be run on a minimum of 87-
octane unleaded petrol (no oil mix). It can be
beneficial to use environmentally adapted
alkylate petrol. See also Technical Data
concerning methanol and ethanol fuels.
8009-327
8009-328
8009-329
WARNING!
Petrol is highly flammable. Observe
caution and fill the tank outdoors
(see the safety instructions.)
!
8009-330

English-18
PRESENTATION
Differential Lock
The differential lock couples the two drive
wheels so that one wheel does not spin,
thereby improving manoeuvrability.
Press the pedal to engage the differential
lock.
Clutch Control
The clutch control is used to move the rider
when the engine is not running.
• Control drawn out, drive system
disengaged.
• Control depressed, drive system
engaged.
Chronometer
The chronometer shows how many hours the
engine has been running. Any time when the
engine is not running but the ignition is
switched on is not registered. The last digit
shows tenths of an hour (6 minutes).
6020-009
6007-216
8009-337