Husqvarna YTH25K54 Owner's manual

English/French
585 90 95-27
Repair Parts Manual
Manuel De Pièces De Rechange
YTH25K54 / 96048006100
Please read the operator's manual carefully and make sure
you understand the instructions before using the machine.
Lisez très attentivement et soyez certain de comprende
ces instructions avant d’utiliser cette machine.

2
HOW TO USE THIS MANUAL
This manual is designed to provide the customer with a means to identify the parts on his/her tractor when ordering repair parts. The
illustrations may or may not represent the actual assemblies; therefore, it is not recommended to use this manual as a guide to assemble
or disassemble the tractor. Some hardware and parts are drawn larger in order to more readily identify them.
Each tractor has its own model number.
The model number for your tractor can be found on the fender under the seat.
When ordering parts, always give the following information:
• Product - “TRACTOR”
• MODEL NUMBER - “YTH25K54" (96048006100)
• Part Number
• Part Description
TABLE OF CONTENTS
SCHEMATIC .......................................................................................................................................................................3
ELECTRICAL.................................................................................................................................................................. 4-5
CHASSIS ........................................................................................................................................................................ 6-7
DRIVE.............................................................................................................................................................................. 8-9
ENGINE....................................................................................................................................................................... 10-11
STEERING .................................................................................................................................................................. 12-13
MOWER DECK ........................................................................................................................................................... 14-15
MOWER LIFT....................................................................................................................................................................16
SEAT .................................................................................................................................................................................17
DECALS............................................................................................................................................................................18
COMMENT UTILISER CE MANUEL
Ce manuel a été dessiné pour fournir le client avec les moyens d'identification des pièces de détachées du tracteur quand il/elle a
besoin de commander les pièces de rechange. Les illustrations ne peuvent pas représenter exactement le modèle que vous avez
acheté. N'utilisez pas ce manuel comme un guide dans le montage et/ou démontage de votre tracteur. La visserie montrée est plus
grande pour faciliter l'identification.
Chaque tracteur a un numéro de modèle particulier.
Le numéro de modèle du produit se trouvera sur l'aile, dessous le siège.
Lorsque vous commandez des pièces de rechange, donnez toujours les renseignements suivants:
• Produit - "TRACTEUR"
• NUMÉRO DU MODÈLE - “YTH25K54" (96048006100)
• Numéro de la Pièce
• Description de la Pièce
TABLE DE MATIERES
SCHÉMA...........................................................................................................................................................................19
ELECTRIQUE ............................................................................................................................................................. 20-21
CHÂSSIS/ENCEINTES............................................................................................................................................... 22-23
ENTRAÎNEMENT........................................................................................................................................................ 24-25
MOTEUR..................................................................................................................................................................... 26-27
ENSEMBLE DE LA DIRECTION................................................................................................................................ 28-29
CARTER DE TONDEUSE........................................................................................................................................... 30-31
LEVAGE DE LA TONDEUSE...........................................................................................................................................32
ENSEMBLE DU SIÉGE ...................................................................................................................................................33
DECALCOMANIES...........................................................................................................................................................34

3
NOTES
M
FUSE
STARTER
SOLENOID
BATTERY
ELECTRIC CLUTCH
CLUTCH/BRAKE
(PEDAL UP)
REVERSE SWITCH
(NOT IN REVERSE)
SEAT SWITCH
(NOT OCCUPIED)
SHORTING
CONNECTOR
CHASSIS
HARNESS
IGNITION
UNIT
HOUR
METER
REGULATOR
CHASSIS HARNESS
CONNECTOR
(MATING SIDE)
DASH HARNESS
CONNECTOR
(MATING SIDE)
LIGHT
SWITCH
HEADLIGHTS
STATOR
FUEL
LINE
FUEL SHUT-OFF
SOLENOID
(IF EQUIPPED)
JUNCTION
CONNECTOR
PTO SWITCH
(DISENGAGED)
SM
B
G
L
2
3
1
6
A2
A1
M
6
3
52
41
6
5
4
3
2
1
SPARK
PLUGS GAP
(2 PLUGS ON
TWIN CYL. ENGINES)
28 VOLTS AC @ 3600 RPM (REGULATOR DISCONNECTED)
CHARGING SYSTEM OUTPUT
9-16AMPDC@3600 RPM
(OPTIONAL)
NON-REMOVABLE
CONNECTIONS
REMOVABLE
CONNECTIONS
WIRING INSULATED CLIPS
NOTE: IF WIRING INSULATED
CLIPS WERE REMOVED FOR
SERVICING OF UNIT, THEY
SHOULD BE RE-INSTALLED TO
PROPERLY SECURE YOUR
WIRING.
SCH12
IGNITION SWITCH
CIRCUIT
POSITION
OFF
B+A1
RUN/OVERRIDE
B+S+A1
START
M+G+A1
B+A1
RUN
“MAKE”
L+A2
POWER OUTLET
(OPTIONAL)
12V
A
AMMETER
(OPTIONAL)
BLACK
BLACK /WHITE
ORANGE
RED
BROWN
BLUE
BLUE
BLACK
BLACK
BLACKBLACK
BLACK
BLACK
BLACK
BLACK
BLACK
BLACK
BLACK
RED
RED
RED
RED
WHITE
WHITE
WHITE
GRAY
GRAY
BLACK
BLACK
B
A
G
H
D
FC
E
PTO SWITCH
B
A
H
D
C
E
BLUE BLACK
TRACTOR - MODEL NO. YTH25K54 (96048006100), PRODUCT NO. 960 48 00-61
SCHEMATIC

4
TRACTOR - MODEL NO. YTH25K54 (96048006100), PRODUCT NO. 960 48 00-61
ELECTRICAL
30
33
34
22
79 21
26
40
71
16
TR04S
90
28
55
With Service Minder Option
4646
2
43
27
99
25
106
29
102
105

5
TRACTOR - MODEL NO. YTH25K54 (96048006100), PRODUCT NO. 960 48 00-61
ELECTRICAL
KEY PART
NO. NO. DESCRIPTION
1 532 16 34-65 Battery
2 874 76 04-12 Bolt Hex Hd 1/4-20 unc x 3/4
8 532 19 32-28 Battery Box
16 532 17 61-38 Switch Interlock
21 532 40 02-52 Harness Socket Light w/4152J
22 532 00 41-52 Bulb, Light # 1156
25 581 49 80-01 Cable Starter
26 532 17 51-58 Fuse
27 873 51 04-00 Nut Keps Hex 1/4-20 unc
28 532 42 16-86 Cable Ground
29 532 40 15-45 Switch Seat
30 532 19 33-50 Switch Ign
33 532 41 19-35 Key / Chain
34 532 11 07-12 Switch Light/Reset
40 581 02 32-01 Harness Ign. Dash
43 532 19 25-07 Solenoid
46 532 40 17-63 Gauge Hourmeter
50 532 17 46-51 Switch PTO
55 817 06 05-12 Screw Thdrol 5/16-18 x 3/4
71 581 02 30-01 Harness Ign Chassis
79 532 17 52-42 Socket Asm Bulb Twistlock
90 532 43 53-95 Cover Terminal Battery
99 817 67 04-12 Screw Hexwsh Thdrol 1/4-20 x 3/4
102 532 40 44-54 Harness Pigtail K46 Tex ROS
105 532 40 75-68 Switch Reverse Tufftorq Pedal
106 532 17 48-14 Palnut 1/4 Lugs
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm

6
TRACTOR - MODEL NO. YTH25K54 (96048006100), PRODUCT NO. 960 48 00-61
CHASSIS
306
125
146
182
176 176
175
150
52
130
130
177
159
159
152
217
chassis-tex_GT HUSQ II_153
68
68
183
236 34
235
68
68
213 213
218
228
228
194
180
58
189
189
233
233
37
194
194
162
282
282
36
36
285
286 283
199
284
287
234
14
202
203
205 151
206
137
137
214
204
208
15
25
207
3
297
191
18
130
130
130
176
5
176
176
350
335
195
350
336

7
TRACTOR - MODEL NO. YTH25K54 (96048006100), PRODUCT NO. 960 48 00-61
CHASSIS
3 532 44 44-81 Applique
5 532 43 74-80 Dash Asm
14 532 44 11-77 Hood
15 532 43 97-33 Lens LH
18 532 44 06-53 Grille
25 532 44 33-85 Lens RH
34 580 91 08-01 Plate Engine
36 817 06 05-12 Screw 5/16-18 x 3/4
37 532 44 12-66 Fender
52 873 68 05-00 Nut Lock 5/16-18
58 532 41 22-80 Drawbar, Upper
68 817 49 05-08 Screw 5/16-18 x 1/2
125 581 68 48-01 Clip Fuel Line
130 532 41 63-58 Screw #10 x 0.750
137 532 40 75-90 Bumper Dash
146 581 85 79-01 Bolt
150 532 43 97-74 Duct Heat Hood
151 532 43 66-70 Bracket Pivot Hood
152 532 43 98-70 Shield Browning/Debris
159 817 00 06-12 Screw 3/8-16 x 3/4
162 532 14 24-32 Screw Hex Wsh Hi-Lo 1/4 x 1/2
175 532 19 63-04 Crossmember
176 532 40 07-76 Screw 10-24 x 5/8 Rnd Qdrx
177 532 19 52-27 Bushing Steering
180 532 41 50-63 Chassis
182 532 40 68-59 Dash Lower
183 874 52 05-20 Bolt 5/16-18 x 1-1/4 Full Thd.
189 817 00 05-12 Screw 5/16-18 x 3/4
191 532 43 74-55 Insert Reflective RH
194 873 90 05-00 Nut Lock Hex Flange 5/16-18
195 532 40 41-37 Plug Hold Dash Lower
199 532 41 34-85 Plate Deck Lift
202 532 43 97-28 Vent Side Hood RH NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
203 532 43 97-27 Vent Side Hood LH
204 532 44 44-84 Vent Hood Top
205 532 43 97-30 Skirt Hood Side RH
206 532 43 97-29 Skirt Hood Side LH
207 532 43 97-34 Bezel RH
208 532 43 97-35 Bezel LH
213 874 76 05-12 Bolt Hex Hd 5/16-18 unc x 3/4
214 532 19 91-45 Clip Retainer
217 532 40 91-67 Rod Pivot
218 532 19 63-95 Hood Stop
228 532 19 51-61 Stud Fastner
233 532 19 65-39 Bolt Shoulder
234 532 40 47-42 Bumper Hood
235 532 40 61-29 Spacer Fender
236 873 93 05-00 Nut Lock 5/16-18 unc
282 532 41 41-10 Clip
283 532 43 98-61 Console Deck Lift
284 532 43 98-23 Console Control PDL
285 532 41 63-15 Console Insert RH
286 532 41 63-17 Console Insert LH
287 817 60 04-06 Screw Hex Washead 1/4-20 x 3/8
297 532 43 74-56 Insert Reflective LH
306 873 90 06-00 Nut Lock
335 532 44 82-04 Cover Lower Dash RH
336 532 44 53-09 Cover Lower Dash LH
350 532 44 51-43 Clip
- - 532 40 09-44 Kit Bumper
KEY PART
NO. NO. DESCRIPTION KEY PART
NO. NO. DESCRIPTION

8
TRACTOR - MODEL NO. YTH25K54 (96048006100), PRODUCT NO. 960 48 00-61
DRIVE
231
51
170
225
125
drive-tex_K46_pedal_109_r1
2
2
73
73 33
205
1
116
33
230
230
183
183
205
116
64
188
161
35
184
167
160
42
29
15
159
159
221
186
189
49
187
50
51
52
51
185
208
210
214
125
215
153
166
211
211
222
17
163
153
99
216
143 185
56
213
221
160
206
26
207
209
92 125
116
197 196
80
125
125
227
226
190

9
TRACTOR - MODEL NO. YTH25K54 (96048006100), PRODUCT NO. 960 48 00-61
DRIVE
KEY PART
NO. NO. DESCRIPTION KEY PART NO. NO. DESCRIPTION
1 – – – – – – Transaxle, TUFFTORQ K46BT
(426120) (Order parts from trans-
axle manufacturer.)
2 532 12 35-83 Key
15 819 13 13-16 Washer 13/32 x 13/16 x 16 Ga.
17 532 41 36-78 Spring, Brake
26 532 19 96-79 Spring Return Cruise
29 532 40 38-06 Rod, Brake
33 812 00 00-01 Ring E
35 583 86 45-01 Rod, Brake, Park
42 532 12 48-72 Cover, Foot Pedal
49 872 11 06-14 Bolt
50 532 19 43-27 Pulley Idler Flat
51 873 90 06-00 Lock Nut 3/8-16
52 532 19 43-26 Idler V-Groove
56 532 13 09-69 V-Belt, Drive
64 532 19 78-65 Shaft Asm. Pedal Brake Control
73 574 49 05-40 Bolt 5/16-18 x 2-1/2 Gr. 5
80 532 44 06-19 Strap Torque
92 874 76 05-20 Bolt Fin Hex 5/16-18 unc x 1.25
99 532 41 57-42 Spring Rod Bypass
116 873 90 05-00 Nut Lock Hex Flange 5/16-18
125 817 00 05-12 Screw 5/16-18 x 3/4
143 817 49 05-08 Screw Thdrol 5/16-18 x 1/2
153 532 12 47-88 Retainer Spring
159 876 02 04-12 Pin Cotter 1/8 x 3/4
160 532 16 94-84 Retainer Clip
161 532 10 57-09 Spring, Return, Clutch
163 532 44 82-75 Rod Pedal Control
166 532 42 91-64 Nut Push .625
167 532 40 52-57 Latch Brake Parking
170 532 41 34-30 Keeper Belt Centerspan
183 532 13 70-57 Spacer Split
184 532 44 14-55 Handle Parking Brake
185 872 11 06-22 Bolt 3/8 - 16 x 2-3/4 Gr. 5
186 532 19 43-21 Spacer Retainer
187 819 13 32-10 Washer
188 532 19 43-23 Link Clutch Ground Drive
189 532 19 43-17 Bellcrank Ground Drive
190 532 19 43-18 Keeper Bellcrank Ground Drive
196 817 00 06-16 Screw 3/8-16 x 1
197 532 19 58-04 Bracket Clutch Anti-Rotation
205 532 12 17-48 Washer
206 532 44 85-96 Bracket Mount Latch Cruise
207 532 19 78-68 Latch Control Cruise
208 532 19 78-69 Gear Sector Control Cruise
209 532 19 95-92 Rod Control Cruise
210 532 40 09-80 Rocker Asm. Pedal Control
211 532 12 01-83 Bearing Nylon
213 532 40 31-19 Knob Control Cruise
214 532 42 12-63 Pedal Forward
215 532 40 17-23 Pedal Reverse
216 532 19 61-31 Bracket Pulley Idler
221 532 40 31-87 Retainer Spring Clip Handle
222 879 21 20-10 Washer 21/32 x 1-1/4 x 10 Ga.
225 532 40 33-19 Keeper Belt Trans.
226 532 40 15-64 Bracket Mount Touque
227 817 49 05-12 Screw Thdrol 5/16-18 x 3/4
230 532 18 89-67 Washer
231 532 40 72-87 Idler V-Groove Pulley
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm

10
TRACTOR - MODEL NO. YTH25K54 (96048006100), PRODUCT NO. 960 48 00-61
ENGINE
29
SPARK ARRESTER KIT
90
9
22
81
82
12
11
41
42
85
62
71
70
79
69
87
2
45
92
37
28
37
1
engine-tex_Kohl-2cyl_16
21 20
18
15
97
96

11
KEY PART
NO. NO. DESCRIPTION
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
For engine service and replacement parts, call the toll free
number for your engine manufacturer listed below:
Kohler Co. 1-800-544-2444
1 – – – – – – Engine Kohl Model No. KT740-3014 (585445901)
(Order parts from engine manufacturer.)
2 532 44 59-62 Muffler
9 584 90 80-01 Keeper Belt Engine
11 532 40 00-08 Clutch Electric
12 532 40 50-97 Pulley Engine
15 581 29 01-01 Tank Fuel
18 532 43 02-20 Cap Asm
20 532 18 29-37 Control Throttle
21 532 41 63-58 Screw #10 x 0.750 BOS Thread
22 532 19 15-96 Control Choke
28 532 40 11-35 Fuel Line
29 532 13 71-80 Spark Arrester Kit
37 532 12 34-87 Clamp Hose
41 532 12 61-97 Washer 1-1/2 OD x 15/32 ID x .250
42 810 04 07-00 Washer Lock 7/16
45 873 51 04-00 Nut Keps Hex 1/4-20 unc
62 532 43 40-17 Shield Heat Muffler
69 532 18 60-54 Gasket
70 583 95 45-01 Tube Exhaust LH
71 583 95 48-01 Tube Exhaust RH
79 532 19 23-34 Screw Socket Head 5/16-18 x .75
81 532 14 84-56 Tube Drain Oil Easy
82 532 42 82-87 Drain Oil Valve
85 532 17 39-37 Bolt Hex 7/16-20 x 4 Cat. 5-1 THR.
87 532 17 18-77 Bolt 5/16-18 x 3/4
90 817 00 06-16 Screw 3/8-16 x 1
92 817 12 06-16 Screw 3/8-16 x 1 SMGML Tap
96 819 09 14-16 Washer 9/32 x 7/8 x 16 Ga.
97 817 67 04-12 Screw Hexwsh Thdrol 1/4-20 x 3/4
TRACTOR - MODEL NO. YTH25K54 (96048006100), PRODUCT NO. 960 48 00-61
ENGINE

12
TRACTOR - MODEL NO. YTH25K54 (96048006100), PRODUCT NO. 960 48 00-61
STEERING ASSEMBLY
61
steering-tex_HUSQSR_14_r1
21
35
19
60
59
58
63
5
62
15
14
13
13
53
8
70
68
69
16
28
28
13
22
64
4
15
14
6
9
87
9
87
67
67
66
6
2
45
51
26
1
63
57
122
122

13
TRACTOR - MODEL NO. YTH25K54 (96048006100), PRODUCT NO. 960 48 00-61
STEERING ASSEMBLY
KEY PART
NO. NO. DESCRIPTION
1 532 43 97-40 Wheel, Steering
2 532 19 59-68 Axle Asm., Front
4 532 40 30-87 Spindle Asm., LH
5 532 40 30-88 Spindle Asm., RH
6 532 12 49-31 Bearing, Race Thrust Harden
7 532 12 17-48 Washer 25/32 x 1-5/8 x 16 Ga.
8 812 00 00-29 Ring, Klip #T5304-75
9 532 12 12-32 Cap, Spindle
13 532 12 17-49 Washer 25/32 x 1-1/4 x 16 Ga.
14 810 04 06-00 Washer, Lock Hvy Hlcl Spr 3/8
15 873 54 06-00 Nut, Crown Lock 3/8-24 unf
16 532 40 82-19 Shaft Steering
19 532 19 47-29 Plate Steering
21 532 18 67-37 Adapter, Wheel Steering
22 532 42 05-37 Strg. Supt. lower
26 532 43 97-43 Insert, Wheel Steering
28 817 00 06-12 Screw 3/8-16 x 3/4
35 532 19 47-32 Gear, Sector Plate
45 819 18 38-12 Washer 9/16 x 2-3/8 x 12 Ga.
51 873 94 08-00 Nut Hex Jam Toplock 1/2-20 unf
53 532 18 89-67 WasherHardened.793x1.637x.060
57 532 19 72-46 Bracket Upstop
58 532 19 47-47 Bolt Shoulder Sector Pivot CFM
59 532 19 47-48 Washer Thrust Sector Steering
60 873 97 10-00 Nut Flange Lock 5/8-11
61 532 19 47-40 Draglink LH
62 532 19 47-41 Draglink, RH
63 817 00 05-12 Screw 5/16-18 x 3/4
64 532 19 98-49 Retainer Clip Spring Steering
66 871 02 07-48 Bolt Hex Fghd 7/16-14 x 3 Serr
67 532 19 47-37 Bushing PM Front Axle
68 873 90 07-00 Nut Lock Flange 7/16-14 Gr. 5
69 532 19 91-62 Washer 1.5 x .505 x .118
70 532 19 61-97 Bracket Deck Susp. Front
122 532 44 49-62 Cap Gear Sector
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm

14
TRACTOR - MODEL NO. YTH25K54 (96048006100), PRODUCT NO. 960 48 00-61
MOWER DECK
mower_deck 54-tex_23_r4
47
7
49
46
32
33
31
30
133
52
52
43
196
97
33
192
49
34
39
46
46
6
21
122
114
98
31
32
25 26
24
27
58
60
59
197
21
18
18
21
21
21
21
113
49
187
190
184
190
187
50
120
117
116
21
197
197
197
189
21
18
13
14
15
11
8
29
12 16 19
185
194
241
242

15
TRACTOR - MODEL NO. YTH25K54 (96048006100), PRODUCT NO. 960 48 00-61
MOWER DECK
KEY PART
NO. NO. DESCRIPTION
KEY PART
NO. NO. DESCRIPTION
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
1 532 44 50-61 Deck Weldment Mower
6 532 19 60-66 Cover Mandrel LH
7 532 19 71-81 Cover Mandrel RH
8 532 19 30-03 Bolt 7/16 Asm. Blade
11 532 18 72-56 Blade Bagging
- - 532 18 72-55 Blade Mulching
12 532 40 48-51 Rod Anti Sway
13 532 18 72-91 Shaft Asm. w/Lower Bearing
14 532 18 72-81 Housing, Mandrel
16 819 13 13-12 Washer 3/8
15 532 11 04-85 Bearing, Ball, Mandrel
18 872 14 05-05 Bolt Carriage 5/16-18 x 5/8
19 532 19 42-08 Pin Cotter 5/16 Bowtie
21 873 68 05-00 Nut, Crownlock 5/16-18 unc
24 532 10 53-04 Cap Sleeve
25 532 17 81-02 Spring, Torsion
26 532 11 04-52 Nut, Push
27 532 18 89-38 Deflector Shield
29 532 13 14-91 Rod, Hinge
30 532 17 39-84 Screw, Thdroll Washer Head
31 532 18 76-90 Washer, Spacer Mower Vented
32 532 15 35-35 Pulley, Mandrel
33 532 40 02-34 Nut, Flg. Top Lock
34 873 68 06-00 Nut Crownlock 3/8-16 unc
39 532 19 73-80 Pulley, Idler, 4.50
43 532 19 60-65 Arm, Idler
46 532 13 77-29 Screw, Thdroll. 1/4-20 x 5/8
47 532 19 61-03 Belt Deck Drive
49 873 90 06-00 Nut, Lock Flg. 3/8-16 unc
50 872 11 06-16 Bolt Rdhd Sqnk 3/8-16 unc x 2
52 532 19 73-79 Pulley Idler
58 532 18 73-42 Baffle Right
59 532 18 73-44 Baffle Left
60 532 18 76-07 Baffle Center
97 532 17 85-15 Washer Hardened
98 532 19 61-05 Spring Drive
113 872 11 05-08 Bolt Rdhd Sqnk 5/16-18 x 3/4
114 532 18 75-56 Rod Tension Relief
116 532 19 34-06 Bolt, Shoulder
117 532 17 48-73 Gauge Wheel
120 819 13 20-12 Washer 13/32 x 1-1/4 x 12 Ga.
122 532 18 75-57 Bushing Tension Relief
184 873 90 05-00 Nut Lock Hex Flange 5/16-18
185 873 90 07-00 Nut Lock Flange 7/16-14 Gr. 5
187 532 19 51-61 Stud Fastener w/"D" Anti-Rotation
189 532 19 51-85 Arm Susp. Mower Rear
190 532 19 65-39 Bolt Shoulder
192 532 19 84-68 Keeper Belt Idler
194 874 49 07-36 Bolt Carr Sqnk 7/16-24 x 2
196 872 14 06-20 Bolt Rdhd 3/8-16 x 2-1/2 Gr. 5
197 872 14 05-08 Bolt Rdhd Sqnk 5/16-18 unc x 1
241 532 15 29-27 Screw TT #10-32.5. 3/8 Flange
242 532 41 55-98 Port Washout
- - 532 41 64-05 Coupling
- - 532 18 72-92 Mandrel Assembly (Includes
housing (key#14), shaft assem-
bly (key#13), and bearing only
(key#15) and nut (key#33) - pul-
ley/washer and blade bolt/wash-
ers not included)
- - 532 41 82-29 Replacement Mower, Complete

16
TRACTOR - MODEL NO. YTH25K54 (96048006100), PRODUCT NO. 960 48 00-61
MOWER LIFT
7
3
87
10 88
2
89
90
87
98
97
97
91
lift-tex_3
91
8987
89
87
2 532 42 20-27 Shaft Asm., Lift
3 532 19 52-31 Lever Asm., Lift RH
7 580 96 23-01 Grip, Lever
10 532 19 63-14 Spring Torsion
87 532 19 42-09 Pin Cotter 7/16 Bow Tie Lock
88 532 41 07-10 Spring Lift Assist
89 819 19 19-12 Washer Clear Zinc
KEY PART
NO. NO. DESCRIPTION
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
KEY PART
NO. NO. DESCRIPTION
90 532 19 42-08 Pin Cotter 5/16 Bow Tie Lock
91 532 40 34-07 Link Lift Susp Mower Rear
97 817 00 06-12 Screw 3/8-16 x 3/4
98 532 19 52-64 Link Lift Susp. Front Mower

17
TRACTOR - MODEL NO. YTH25K54 (96048006100), PRODUCT NO. 960 48 00-61
SEAT ASSEMBLY
1 532 43 98-22 Seat
2 532 18 01-66 Bracket Pivot Fender
3 532 14 06-75 Strap, Asm Fender
6 873 80 06-00 Nut, Lock w/Ins. 3/8-16 unc
7 532 12 41-81 Spring, Seat Cprsn
8 532 17 18-77 Bolt 5/16-18 unc x 3/4 w/Sems
10 532 19 69-77 Pan, Seat
21 532 17 18-52 Bolt, Shoulder 5/16-18
37 873 80 05-00 Nut, Lock 5/16-18 unc
40 532 19 76-61 Handle Slide Seat
41 532 19 82-00 Spring Latch Seat
43 874 76 06-12 Bolt 3/8-16 x 3/4
44 819 13 38-12 Washer 13/32 x 2-3/8 x 12 Ga.
KEY PART
NO. NO. DESCRIPTION
KEY PART
NO. NO. DESCRIPTION
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
2
6
1
40
10
37
37
21
21
3
41
7
8
7
8
seat-tex_6.5SL_3
44
43
8
8
6

18
TRACTOR - MODEL NO. YTH25K54 (96048006100), PRODUCT NO. 960 48 00-61
DECALS
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
KEY PART
NO. NO. DESCRIPTION
6
2
1
3
11
4
10
5
9
8
7
wheel_art_1-tex
WHEELS AND TIRES
KEY PART
NO. NO. DESCRIPTION KEY PART
NO. NO. DESCRIPTION
17
16 16
1 532 05 91-92 Cap, Valve, Tire
2 532 06 51-39 Stem, Valve
3 532 13 83-36 Rim Assembly, Front
4 532 05 99-04 Tube, Front (Service Item Only)
5 532 10 62-22 Tire, Front 15 x 6-6
6 532 12 49-57 Fitting, Grease (Front Wheel Only)
7 532 12 49-59 Bearing, Flange (Front Wheel
Only)
8 532 17 50-39 Cap, Axle
9 532 13 84-68 Tire, Rear 20 X 8-8
10 532 12 49-26 Tube, Rear (Service Item Only)
11 532 13 83-37 Rim Assembly, Rear
- - 532 14 43-34 Sealant, Tire (10 oz. Tube)
14
5
3
8
1 581 57 90-01 Decal, Fender Warning
2 581 57 99-01 Decal, Warning
3 581 57 95-01 Decal, Warning Keep Hands Away
4 532 42 38-29 Decal, Hood Cust Resp
5 581 72 45-02 Decal, Caution
8 581 58 00-02 Decal, Mower Sch.
9 532 14 50-05 Decal, Battery Dnge/Poi
14 532 44 57-18 Decal, Panel Side
16 581 62 73-01 Decal, Hood Logo
1
17 585 79 56-01 Decal, Replacement
- - 581 72 48-01 Decal, Bypass
- - 585 71 44-02 Decal, Pop Armor Protected Deck
- - 532 43 96-81 Pad, Footrest, LH
- - 532 43 96-82 Pad, Footrest, RH
- - 585 90 94-32 Manual, Operator's
(English/French)
- - 585 90 95-27 Manual, Parts (English/French)
14
9
2
4

19
TRACTEUR - NO. DE MODÈLE YTH25K54 (96048006100), NO. DE PRODUIT 960 48 00-61
SCHÉMA
NOTES
M
STATOR
SM
B
G
L
2
3
1
6
A2
A1
M
63
52
41
6
5
4
3
2
1
SCH12-F
12V
A
NOIR
NOIR/BLANCHE
ORANGE
ROUGE
BRUN
BLU
BLU
NOIR
NOIR
NOIRNOIR
NOIR
NOIR
NOIR
NOIR
NOIR
NOIR
NOIR
ROUGE
ROUGE
ROUGE
ROUGE
BLANCHE
BLANCHE
BLANCHE
GRIS
GRIS
NOIR
NOIR
B
A
G
H
D
FC
E
B
A
H
D
C
E
BLU NOIR
PRISE DE FORCE
(DÉGAGÉE)
(Si Équipé)
RENDEMENT DU SYSTÈME DE
CHARGE (9-16 AMP CC @ 3600 T/M)
RÉGULATEUR
(RÉGULATEUR DÉBRANCHÉ)
28 VOLTS CA MIN. @ 3600 T/M
INTERRUPTEUR LUMIÈRE
PHARES
L+A2
PINCES ISOLÉES
REMARQUE: SI LES PINCES
ISOLÉES ONT ÉTÉ ENLEVÉES
POUR L'ENTRETIEN DU MODÈLE,
ELLES DOIVENT ÊTRE REMISES
EN PLACE POUR ASSURER LE
BON FONCTIONNEMENT DU CÂBLAGE.
CONNECTEURS
NON-AMOVIBLES
CONNECTEURS
AMOVIBLES
(ACCOUPLER CÔTÉ)
(ACCOUPLER CÔTÉ)
Tableau de bord Harnais
Châssis Harnais
CONNECTEUR CONNECTEUR
CONTACTEUR D'ALLUMAGE
CIRCUITPOSITION
ARRÊT
MARCHE/
ALLUMAGE
DÉMARRAGE
MARCHE
“FAITS”
B + A1
B + S + A1
M + G + A1
B + A1
PRISE DE FORCE
INTERRUPTEUR
(FACULTATIF)
exutoire
Châssis
CONNECTEUR
JONCTION
CONNECTEUR
EMBRAYAGE
ÉLECTRIQUE

20
TRACTEUR - NO. DE MODÈLE YTH25K54 (96048006100), NO. DE PRODUIT 960 48 00-61
ÉLECTRIQUE
30
33
34
22
79 21
26
40
71
16
TR04S-f
90
28
55
4646
2
43
27
99
25
106
29
102
105
Avec l'indicateur d'heures l'option