Husqvarna TS 250 X3 User manual




It is the owner’s responsibility to ensure that all operators of this machine have
read and understood the content of this manual before using the product!
Careless or improper use of this machine can cause serious or even fatal injury!
Allow only competent adults to operate this machine!

EVERY MACHINE IS THOROUGHLY TESTED BEFORE LEAVING THE FACTORY. EACH MACHINE IS SUPPLIED
WITH A COPY OF THIS MANUAL. OPERATORS OF THIS EQUIPMENT MUST READ AND BE FAMILIAR WITH THE
SAFETY WARNINGS. FAILURE TO OBEY WARNINGS MAY RESULT IN INJURY OR DEATH. FOLLOW INSTRUC-
TIONS STRICTLY TO ENSURE LONG SERVICE IN NORMAL OPERATION.
CONTENTS
................................................................................................................................................... 3 - 5
.............................................................................................................................................. 5
................................................................................................................................................................ 6
........................................................................................................................... 6 - 7
........................................................................................................................ 8 - 9
Figures:
......................................................................................................................................................................
......................................................................................................................................................................
......................................................................................................................................................................
......................................................................................................................................................................
Instructions:
............................................................................................................................................................
.............................................................................................................................................................
.........................................................................................................................................
........................................................................................................................................
...........................................................................................
................................................................................................................................
......................................................................................................................
......................................................................................................................................
..........................................................................................................................
..................................................................................................................................................
..................................................................................................................................
.......................................................................................................
..........................................................................................
.......................................................................................................................................................
....................................................................................................................................
..................................................................................................................................................
.....................................................................................................................................................................
NOTE:

Symboles
•
•
•
•
•
•
•
•
•
•
•
•
• -

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

WARNING
HEARING HAZARD
85 dB (A)
ATTENZIONE!!!
85 dB (A)
ATENCION
RIESGO DE DAÑO AUDITIVO
85 dB (A)
•
•
•
•
•
•
•
•
•

DECALS & LOCATIONS
ETIQUETAS Y SU UBICACIÓN
AUTOCOLLANTS ET LEURS EMPLACEMENTS
DUST WARNING
Cutting, especially when DRY cutting, generates dust that comes from the material being cut, which
frequently contains silica
-
-
California Prop 65 Warning:

  
  
  
     

  
   
   
   
    
  
   
  
  
   
      

DO .
DO
DO
DO
DO
DO
DO
DO
DO
DO
DO
DO
DO
DO
DO DO NOT USE THE
BLADE.
DO
DO
DO -
DO
DO
DO
DO
DO
DO
DO
DO
DO
DO
DO
DO
DO
DO
DO
DO
DO
DO
DO
DO
DO
DO
DO
DO
DO
DO
SAFETY FIRST!
WARNINGS
DO’s AND DO NOT’s
WARNING: FAILURE TO COMPLY WITH THESE WARNINGS AND OPERATING
INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS BODILY INJURY.
DO

DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
*****************
This saw was designed for certain applications only. DO NOT modify this saw or use for any application other
than for which is it was designed. If you have any questions relative to its application, DO NOT use the saw until
you have written Husqvarna Construction Products and we have advised you.
Husqvarna Construction Products
17400 West 119th Street
Olathe, Kansas 66061
In USA 1-800-288-5040
SAFETY FIRST!
WARNINGS
DO’s AND DO NOT’s
WARNING: FAILURE TO COMPLY WITH THESE WARNINGS AND OPERATING
INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS BODILY INJURY.
DO NOT

 
  
  
  
    
        
  
 
  
   
  
   
     
     
  
     
  
    
 
    
  
  
  
   
     
    
  
     
    
     
  
  
   
      
 
      
      
    
       
     
 
       
 
































 









These signs will give
advice for your safety
I N S T R U C T I O N
INDICATION
INFORMATION
WARNING PROHIBITION
Use
Tools:
Tile Cutting Accessories
(For information or availability of other accessories con-
tact your Husqvarna supplier.)
Blade Capacity
Blade Rotation
Depth of Cut
Horsepower:
Voltage:
Hertz:
F.L. Amperages:
Blade Shaft RPM:
Weight: lb. (kg.)
Dimensions - L x W x H: in
(mm)
Conveyor Cart - L x W: in (mm)
Pan Holding Capacity
Water Pump Output
The operator must wear
p r o t e c t i v e c l o t h i n g
appropriate to the work he
is doing.
Any persons not involved in the work should
leave the area.
See Figure 1
•
5.
NOTE:
•
•
Use only blades marked with a maximum
operating speed greater than the blade shaft
speed.
Before starting up the machine, make sure
you read this entire manual and are familiar
with the operation of this machine.
The working area must be completely clear,
well lit and all safety hazards removed.
1 Features
3 Machine Set-Up

IF ANY PARTS ARE MISSING OR DAMAGED, PLEASE
CONTACT YOUR Husqvarna CUSTOMER SERVICE
FOR INSTRUCTIONS.
Tools required: -
Husqvarna®
•
Install the Cutting Head Assembly (1):
-
Figures 2a & 2b
See Alignment Procedures
-
3.
Set-up with the Torsion Spring (W):
Water Pump Assembly (5) Set-up:
-
Note:
The water pump inlet screen must be sub-
merged in order to properly pick up water.
-
NOTE: THE MOTOR WATER PUMP OUTLET IS
NOT TO BE USED AS A GENERAL PURPOSE
CONVENIENCE OUTLET. USE FOR CONNECTION
OF THE SUPPLIED WATER PUMP ONLY.
WATER PUMP SAFETY GUIDELINES
Always plug the saw power cord into a GFCI
outlet when using. If a GFCI type outlet is not
available, use a plug-in type GFCI plugged
into a properly grounded outlet. Do not use
any temporary plug adapters.
DO NOT EVER -
Installation & Removal of Cutting Blade:
Always set the Motor Switch to OFF prior to
mounting the blade.
Husqvarna®

Using the Bladeshaft Lock.
Rotation direction is indicated by an arrow on
one side of the blade. Make sure the blade
contact surfaces are clean, free of debris.
Do not over-tighten Bladeshaft Nut. Do not use
Bladeshaft Lock to tighten Arbor Nut.
-
Using the Bladeshaft Lock
-
Features
-
-
WARNING: Read the Operating Procedure
completely before operating your tile saw.
Take into account the working conditions
from the health and safety point of view.
Always pay extreme care and attention to the
preparation of the machine before starting.
Remove all wrenches and tools from the
machine.
Always keeps blade guard in place.
WARNING: Check that the ON/OFF switch is in the
OFF position. Then connect the power cord
to a properly grounded outlet of the correct
voltage. See the decal near the power cord
for power requirements. If needed, use the
correct size three (3) conductor extension
cord to avoid excessive voltage drop. Never
use lamp cord type extensions. Refer to the
Recommended Extension Cords , Section 7.
ON
The water supply should be adequate, with
the water clean and make certain the WATER
LEVER IS ALWAYS ABOVE THE PUMP INLET.
Do not run the water pump dry!! Unplug for
dry cutting.
4 OPERATING PROCEDURE

Good motor performance depends on proper
voltage. Extension cords that are too long and/
or too small in wire gauge reduce the voltage
to the motor under load. Use extension cords
no smaller than indicated below.
2. Check the Parallel Alignment
MOTOR F.L. AMPS 50’ Cord 75’ Cord 100’ Cord
6 MANUAL THERMAL OVERLOAD
7 RECOMMENDED EXTENSION
8 ALIGNMENT PROCEDURES
Husqvarna®
1. Check the Blade in Slot Alignment
Cutting Head Adjustment (See Figure 1)
section 10
5 ADJUSTABLE LOCKBAR WITH
DEPTH LINKING PROTECTION
FIGURE 3

Before performing any maintenance, ALWAYS
place the machine on a level surface with
the motor OFF and disconnect the electrical
current. Let the machine cool down!!
Husqvarna®
11 MAINTENANCE PROCEDURES
10 PLUNGE CUTTING
See Figures 1 & 2
Spring Force Adjustment:
Limiting Cutting Head Movement:
Cutting Head Adjustment; section 8.
9 PROFILE WHEEL SET-UP AND USE
See Figure 1
Husqvarna®
Parallel Alignment for Sraight Cuts
Check Parallel Alignment.
5. Note:
CLEAN
THE MACHINE!!
WATER PUMP TROUBLE-SHOOTING
PROCEDURE
Entrust all repairs to your authorized dealer
only.

Husqvarna® -
13 REPAIRS
14 SPARE PARTS
V-Belt Tensioning with Cam Adjustment:
Always set the Motor Switch to OFF and un-
plug power cord before making any repairs
or adjustments to your saw.
-
Again, adjust only with the saw
turned off and unplugged.
-
-
If Water Stops Flowing
1. Stop Sawing
2. Disconnect Electrical Plug from Outlet
3. Remove the Pump
4. Back Flush.
12 WATER PUMP TROUBLE-SHOOTING PROCEDURE

The instructions for use and spare parts found in this document are for information only and are not binding. As part
prior notice.
The manufacturer accepts no
responsibility caused by unsuitable
ANGLE GUIDE PROTRACTOR MIGHTY MITER GUIDE BULLNOSE FOLDING STAND
542 05 10-20* 542 05 10-10* 542 16 14-80* 542 05 10-30* 542 20 32-52*
RIP FENCE
ADJUSTABLE PROTRACTOR:
DUAL 45 ANGLE GUIDE:
BULLNOSE MITER GUIDE:
MIGHTY MITER GUIDE:
FOLDING STAND:
ADJUSTABLE ROLLING STAND:
-
CART EXTENSION:
Parts List:
Diag. Part No. Qty. Description Diag. Part No. Qty. Description
(for TS250X only)
15 TILE CUTTING ACCESSORIES

NOTES:
NOTAS:
REMARQUE :