Husqvarna WT2GO User manual

WT2GO
Constant Pressure Water Supply Unit
OPERATOR’S MANUAL

Table of Contents
INTRODUCTION ...............................................................................................................................................1
DISCLAIMER.....................................................................................................................................................1
ABOUT THIS MANUAL......................................................................................................................................2
KEY TERMS..........................................................................................................................................................2
PRODUCT INFORMATION ................................................................................................................................3
SAFETY INFORMATION .......................................................................................................................................3
SAFETY DECALS ...................................................................................................................................................4
PRODUCT DESCRIPTION AND SPECIFICATIONS ..................................................................................................4
OPERATION .....................................................................................................................................................6
BEFORE USE ........................................................................................................................................................6
MAINTENANCE ................................................................................................................................................8
GENERAL RECOMMENDATIONS: ........................................................................................................................9
WT2GO SPECIFIC MAINTENANCE .......................................................................................................................9
STORAGE .......................................................................................................................................................10
TROUBLESHOOTING.......................................................................................................................................11
SPARE PARTS .................................................................................................................................................12

WT2GO - User Manual Page 1 of 15
INTRODUCTION
Thank you for purchasing a Husqvarna product.
This manual provides information and procedures to safely operate and maintain the
WT2GO. For yours and/or other’s safety and protection from injury, carefully read, understand and
observe the safety instructions described in this manual.
Keep this manual or a copy of it with the machine. If you lose this manual or need an additional copy,
please contact Husqvarna. This machine is designed and built with user safety in mind; however, it
can present hazards if improperly operated and/or serviced. Please follow the operating instructions
carefully. If there are any questions regarding operating or servicing of this product, please contact
Husqvarna.
The information contained in this manual was based on devices in production at the time of
publication. Husqvarna reserves the right to change any portion of this information without notice.
All rights, especially copying and distribution rights are reserved.
Copyright 2019 by Husqvarna.
No part of this publication may be reproduced in any form or by any means, electronic or mechanical,
including photocopying, without express written permission from Husqvarna.
Any type of reproduction or distribution not authorized by Husqvarna represents an infringement of
valid copyrights and will be prosecuted. We expressly reserve the right to make technical
modifications, without due notice, which aim at improving our machines or their safety standards.
DISCLAIMER
Husqvarna and its affiliates take no responsibility for any damage, injury or death resulting from the
incorrect or unsafe use of this product. Use of this product should be undertaken by competent
persons only. It is the operator’s responsibility to ensure that the following safety procedures are
followed. If you are unsure, do not operate this product.
Record the model and serial numbers as well as date and place of purchase for future reference.
Have this information available when ordering parts and when making technical or warranty inquiries
HUSQVARNA SUPPORT
Please contact your local Husqvarna agent
MODEL NO.
SERIAL NO.
DATE OF PURCHASE
PURCHASE LOCATION

WT2GO - User Manual Page 2 of 15
ABOUT THIS MANUAL
This manual uses the following symbols to help differentiate between different kinds of information.
The safety symbol is used with a key word to alert you to potential hazards in operating and owning
WT2GO. Follow all safety messages to avoid or reduce the risk of serious injury or death.
KEY TERMS
READ
CAREFULLY
READ CAREFULLY –refers to important
information that should be paid careful attention.
CAUTION
CAUTION - indicates a potential hazardous situation
which, if not avoided, may result in minor or moderate
injury
WARNING
WARNING –indicates a potentially hazardous
situation which, if not avoided, could result in death or
serious injury
DANGER
DANGER –indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury
PROHIBITED
PROHIBITED –identifies actions that should never
be carried out by any one interacting with the
machine.
These safety warnings do not eliminate all possible hazards that could occur therefore it is essential
to use common sense and to strictly follow any instructions to prevent accidents.

WT2GO - User Manual Page 3 of 15
PRODUCT INFORMATION
SAFETY INFORMATION
WARNING
Read this manual thoroughly before operating your WT2GO.
Failure to follow instructions could result in serious injury or death.
WARNING
Husqvarna WT2GO is designed for ease of use and safety.
However, damage to the device and personal injury is possible if
used incorrectly. Instruct all operators in care and use of the
machine before use.
WARNING
RISK OF EXPLOSION
Contents of device are under pressure (even when empty). Do
not attempt to disassemble device as serious injury may occur.
Warranty is voided if disassembled (other than by registered
service agent).
•ALWAYS wear PPE appropriate to task; such as goggles, ear muffs, gloves, and closed foot
wear.
•ALWAYS use recommended hose fittings as they are tested at rated pressure. Use of non-
genuine accessories may reduce performance and/or working life of device.
•ALWAYS use care in filling tanks and ensure that a firm connection is made between
connectors.
•ALWAYS Make sure connectors/hose are free of debris that could obstruct/damage device.
•NEVER introduce foreign agents (i.e. soaps, solvents, colours, etc.) to device. Doing so will
void warranty.
•ALWAYS follow manufacturer’s recommendations, including those of equipment used in
conjunction with WT2GO (for example; Concrete saw user’s manual)
WARNING
RISK OF FALL HAZARD
•Use of WT2GO can create puddles and slippery surfaces.
•Keep operating area clear of obstacles.
•DO NOT operate the machine with missing, broken, or non-genuine parts.
WARNING
RISK OF EXPLOSION OR DAMAGE TO DEVICE
Device is designed for use on water main’s pressure and has
been tested to 70 Psi. Do not connect to sources which you feel
may exceed this pressure. i.e. stand pipe into water main, hydrant
without pressure reducer, irrigation pump, etc. Doing so will void
warranty.

WT2GO - User Manual Page 4 of 15
•DO NOT drag the device using only the hose as this may cause damage to the device and/or
fittings.
•NEVER spray near power source.
WARNING
RISK OF ELECTRICAL SHOCK
•Risk of electrocution.
•Be aware of electrical hazards whilst performing task as
contact with power source may cause electric shock.
SAFETY DECALS
(At rear also)
(Concealed in base)
Prop65-warning

WT2GO - User Manual Page 5 of 15
PRODUCT DESCRIPTION AND SPECIFICATIONS
The Husqvarna WT2GO is a constant pressure water supply device. It is designed and engineered to
simplify the process of supplying water in situations where regular hosing is difficult. The WT2GO
includes a multi-function nozzle, an on/off valve, 3 metres of reinforced hose, all mounted on a
compact two chamber frame design.
Husqvarna
WT2GO
OVERALL WEIGHT - Empty
6kg/13.2lb
OVERALL WEIGHT –Full
20kg/44lb
OVERALL WIDTH
325mm/12.8inch
OVERALL HEIGHT
800mm/31.5inch
OVERALL DEPTH
144mm/5.7inch
HOSE LENGTH
3m/18ft
PRESSURE OUTPUT
7-10psi
FLOW RATE
Approx. 0.5 –7.0 L/min (0.13 -
1.85 gal/min)

WT2GO - User Manual Page 6 of 15
OPERATION
NOTE: IMPROPER treatment of WT2GO can damage it and shorten its working life.
DO NOT attempt to open device to alter or to repair it. This must ONLY be done by
Husqvarna approved service technician.
BEFORE USE
1. Inspect device
1.1 Check for any damage. Check for loose or missing fasteners (2x nut/bolt in base & 2x screws in
handle).
1.2 Ensure all fittings are tight (do not over tighten using tools as damage may occur to fittings).

WT2GO - User Manual Page 7 of 15
2.1 Attach hose adaptor to the tap
2.2 Attach the hose plug to a tap
2.3 Turn tap on fully open
FILLING
WARNING
Using high-pressure pumps, direct connection to water mains or
other high-pressure sources to fill WT2GO that exceed rated
pressure (70 psi) will void warranty.
- Only use water.
- DO NOT mix with oil, detergents, etc.
- DO NOT modify device in any way.
To fill WT2GO, observe the following steps:

WT2GO - User Manual Page 8 of 15
2.4 Allow WT2GO to fill.
2.5 Turn tap off
2.6 Remove the hose plug/connector from the tap
2.7 Connect the WT2GO to desired application
and use as required (i.e. concrete cutter, core drill, etc.)

WT2GO - User Manual Page 9 of 15
MAINTENANCE
GENERAL RECOMMENDATIONS:
Regular maintenance will improve the performance and extend the life of your Husqvarna product.
The WT2GO warranty does not cover items that have been subjected to operator abuse or
negligence or disassembly.
Should you have questions about replacing components on your WT2GO, please contact your
dealer/service workshop for assistance.
WT2GO SPECIFIC MAINTENANCE
This device is designed for the rigours of the construction industry. However, care is still required to
maximise its working life. If the instructions in this manual are heeded, you can expect a long and
rewarding service from your Husqvarna WT2GO.
Cleaning
Hose and wipe down WT2GO using soapy water be cautious not to introduce debris into inner
workings.
Using a high-pressure washer is not recommended as this could strip the decals on the device.
Do not clean internally with soaps or other cleaning agents, rinse with fresh water and empty to store.
Clear Debris
Before use, clear debris from hose line. If debris has entered the hose line disconnect from WT2GO
base (be aware that if the device is full water will spray out) and connect the free hose to a tap, flush
out any debris before reconnecting and refilling WT2GO.
Check multi spray nozzle
Ensure nozzle is connected securely and functioning correctly. Selector should rotate between
options smoothly with a slight click at each function.
Check one-way valve
Inspect one-way valve on hose fitting and ensure it is working correctly. Ensure no debris is in
mechanism.
NOTE: IMPROPER treatment of WT2GO can damage it and shorten its life.

WT2GO - User Manual Page 10 of 15
Threaded fittings
Check threaded fittings are tight to ensure a good seal. Do not use hand tools to over tighten
threaded fittings as damage may occur.
Tools can be used to gently loosen fittings on hose if required.
The barb fitting on the top lid of the device can be tightened/loosened by hand. Use cloth to improve
grip if tight. Use of multi grip plyers may be required if too tight. Use gently avoiding damage to barb
and WT2GO top lid frame.
STORAGE
Long term storage instructions
It is not advised to store a full WT2GO for long periods (weeks/months) as this may reduce
performance of your product. Empty your WT2GO before long-term storage.
Do not clean inside tanks with soaps or other cleaning agents/products, rinse with fresh water and
empty.

WT2GO - User Manual Page 11 of 15
TROUBLESHOOTING
TROUBLE SHOOTING GUIDE
PROBLEM
CAUSE
REMEDY
Pump does not fill
Valve faulty
Inspect valve on hose
Blockage in hose
Remove hose from WT2GO and
flush with tap water from either end
Check for blockages at barbed
fittings
Blockage in top cap
Inspect inlet for debris
Irregular variations in
pressure
Machine being used has
blockage
Refer to applicable machine’s
operator manual
Valves blocked by debris
Clean the valves
Air in system
Follow instructions on device to fill
from empty
Hose blocked by debris
Remove hose from WT2GO and
flush with tap water from either end
Pressure drop
Tank empty
Fill following procedure in manual/
and on WT2GO
Blockage in hose
Remove hose from WT2GO and
flush with tap water from either end
Faulty valve
Inspect valves for blockages/damage
Water leaking from main
housing
Ruptured bladder
Contact your servicing dealer
Cracked housing
Contact your servicing dealer
Water accumulated whilst
stowed on side
When stowed on side or upside-
down water can accumulate in upper
housing. This is normal do not
confuse with leaking.

WT2GO - User Manual Page 12 of 15
SPARE PARTS
#
Husqvarna
Part no
Description
1
598765801
(HOSE With Screw and QC Fitting H2G-05)
2
598768201
CONNECTOR Quick Connect with Stop
3
598767801
(SPRAY GUN H2G-09)
4
598766301
SCREW on QC for Top Lid (Black New)
5
598766401
(ADAPTER 1/2-3/4-1 Tap adaptor H2G-08)
6
598766402
(ADAPTER 3/4" Tap Adapter GHTF USA/Canada H2G-08-01)

WT2GO - User Manual Page 13 of 15
CONTACT INFORMATION
For sales, service, warranty and part orders, please contact your local Husqvarna agent