USER MANUAL - LS218A POWERED BASS BIN
PAGE 3PAGE 2
Do not remove the amplifier module of the Speaker. Removing this panel yourself will
expose you to potentially dangerous voltages. There are no user-serviceable parts inside
the Speaker.
Do not connect the input or output connectors of your Speaker to any other voltage
sources, such as batteries, mains power or power supply units, regardless of whether the
Speaker is switched on or off.
During long periods of disuse, the power cable should be unplugged from the mains
voltage outlet.
Never force the power on-off switch to the ON position if it will not stay there by itself.
Never use your Speaker near heat radiating appliances, such as stoves and heaters.
Do not apply an input signal that is much greater than that which is required to achieve
the maximum output level. This may damage the pre-amplification stage circuitry.
Do not operate your Speaker on a surface or in an environment that may impede the normal flow of
air around the Speaker.
- The power supply cord or plug/s have been damaged.
- Liquids have been spilled inside the speaker enclosure.
- The speaker has been exposed to rain or excessive moisture.
- The speaker does not appear to operate normally, or exhibits a reduction in performance.
- The speaker has been dropped or the enclosure is damaged.
After long periods of disuse, the mains cable should be inspected for any damage before
using the Speaker again.
Your Speaker should be serviced only by qualified service personnel. Contact your nearest
official retailer should your Speaker need technical attention.
If the Speaker is consistently used in an extremely dusty or smoky environment, the amplifier
should periodically be blown free of foreign matter. However, this operation should only be
carried out by a qualified service agent/centre
Your Speaker should be serviced by a qualified service technician when:
PAGE 3PAGE 2
SYMBOL ALERTING THE OPERATOR TO FOLLOW IMPORTANT OPERATING
INSTRUCTIONS AND PRECAUTIONS DETAILED IN THIS DOCUMENT.
Do not spill water or other liquids into or on the Speaker, or operate the Speaker whilst
under wet or damp conditions.
Do not use the Speaker if the electrical power cable is frayed or damaged. The mains
cable should be routed so that it is not walked upon or pinched by objects close by. Only
use the original power cable supplied with your Speaker.
Precaution should be taken so that the Earth connection is not defeated.
Ensure that power outlets and mains voltage conform to the power requirements printed
on the back panel of the Speaker.
Always operate the Speaker with the AC Earth wire connected on both sides
(speaker and mains).
Power down and disconnect your Speaker from mains power before attempting any
physical connections to audio sources.
SYMBOL WARNING THE OPERATOR THAT UNINSULATED, DANGEROUS VOLTAGES
ARE PRESENT WITHIN THE ENCLOSURE THAT MAY POSE A RISK OF ELECTRIC
SHOCK.
Follow all instructions printed on this user manual and the back panel of the
Speaker for proper and safe operation.
Save the carton and packing material even if the Speaker has arrived in perfect condition.
Should you ever need to ship the Speaker for servicing, use the original packaging supplied.
Read all documentation before operating your Speaker. Retain all documentation for future
reference.
IMPORTANT PRECAUTIONS
