Hygieneprofi Breeze User manual

C
LIST OF COMPONENTS Qty
A Safety Strap x1
B Fixing Screws x2
1
Magrini Limited
Unit 5, Maybrook Industrial Estate, Brownhills, Walsall WS8 7DG
Tel: [phone] Fax: [phone] www.magrini.co.uk
Breeze High Chair Safety Strap
Fitting Instructions
Magrini Limited
Unit 5, Maybrook Industrial Estate, Brownhills, Walsall WS8 7DG
Tel: [phone] Fax: [phone] www.magrini.co.uk
A
Invert chair, remove old Strap, & note fixing points
(1) & (2) on base of Seat as (shown right).
Note: Do not disassemble chair. 1
2
UNDERNEATH
OF SEAT
1
2

2
3
Place the Safety Strap over Seat,
push rear fixing point of strap down between
rear of Seat & Back Support then push front
fixing point down the gap
between rear of Safety ‘T’ Bar & Seat.
Magrini Limited
Unit 5, Maybrook Industrial Estate, Brownhills, Walsall WS8 7DG
Tel: [phone] Fax: [phone] www.magrini.co.uk
Invert chair then Insert Fixing Screws
through strap into fixing holes and tighten
securely - your Safety Strap is fixed and
ready to use.
DOC M212-46825 08/13