Hyper Tough HT19-401-003-21 User manual

23
1
1
1
2
ASSEMBLY ASSEMBLYASSEMBLY
1. ASSEMBLING THE BLOWER TUBE
Slide the lower blower tube to upper blower tube.
2. ASSEMBLING THE BLOWER
Press the tube release button, so that you can slide
blower tube to the motor housing.
3. ATTACHING THE EXTENSION CORD
HT19-401-003-21
Electric Blower
7.5 A

4 5 6
4. STARTING & STOPPING
Starting
Move the On/Off switch to the “I” or “II” On position.
Stopping
Move the On/Off switch to the “0” Off position.
5. USING THE BLOWER
USER TIPS
- Adjusting the Blowing Speed (I or II) according to the
desired working condition.
- Hold the blow tube approximately 8” above the
ground when operating the tool.
-
Use a sweeping motion from side to side. Advance slowly
keeping the accumulated debris/leaves in front of you.
- After blowing the debris/leaves into a pile, it is easy
to dispose of the pile.
6. ADJUSTING THE BLOWING SPEED WITH 2-SPEED
SWITCH
ON OFF
OPERATION OPERATIONOPERATION
HT19-401-003-21
Electric Blower
7.5 A