Hyro 3000FTA User manual

Content
SafetyPrecaution...................................................................................
1.Reference
1.1GeneralFeatures...............................................................................
1.2Accessories......................................................................................
2.BasicFunction
2.1FrontPanel.......................................................................................
2.2RearPanel........................................................................................
2.3RemoteControlUnit...........................................................................
3.Installation and Connection
3.1Connecting toTV..............................................................................
3.2Connecting toDishLNB.....................................................................
4.Installation and Operation
4.1Menu Guide .....................................................................................
4.2OtherUsefulInformation ...................................................................
5.AdditionalInformation
5.1ProblemSolving ...............................................................................
5.2TechnicalSpecification .....................................................................
5.3Menu Screen Structure......................................................................
5.4Glossary.........................................................................................
@1
3
7
25
24
21
2
4
5
6
9
10
12
23
26
Content

+SafetyPrecaution
ThisSTBhasbeen designed and manufactured tosatisfythe international
safetystandards.Pleaseread the following safetyprecautionscarefully
beforeoperatingthisreceiver.
4 MainSupply:
Beforeoperating,pleasecheck the unitsoperating voltage is90~250VAC
50/60Hz.
4 Overload:
Donotoverload awall outlet, extension cordoradapter,neitheruse
damaged
powercordortouchitwithwethand asthismayresultinelectricshock.
4 Liquid:
The receivershall notbe exposed todripping orsplashing water,and thatno
objectsfilled withliquids,suchasbase,shall be placed on the apparatus.
4 Ventilation:
Keep the slotson top ofthe receiveruncovertoallowsufficientairflowtothe
unit. Donotputthe receiveron soft furnishingsorcarpets.Donotexposethe
receivertodirectlightordo notplaceitnearaheaterorinhumidconditions.
Donotstack otherelectronicequipmentson top ofthe receiver.
4 Cleaning:
Plug outthe receiverfromthe wall outletbeforecleaning.Clean the receiver
byasoft clothormildsolution ofwashing-up liquid(no solvents).
4 Connection:
Disconnectthe receiverfromthe mainswhen you connectittosatelliteLNB
ordisconnetitfromLNB.Failurewouldpossibilycausedamage tothe LNB.
4 Location:
Putthe receiverindoorinordertoavoidlightening,raining orsunlight.
4 Uncover:
Donotremovethe cover,toreducethe risk ofelectricshock.Contactqualified
and licensed servicepersonneltorepairthe receiver,orcontactyourdealer.
SafetyPrecaution
@2

1.Reference
1.1GeneralFeatures
MPEG-2&FullyDVB Compliant
PLL RF-ModulatorUHF21~69 withPALB/G,I,D/K
MultiLNBControlbyDiSEqC1.0,1.2,1.3(USALS)
SCPC/MCPCReceivablefromC/Ku-Band Satellites
DigitalTunerwithLoop-Through
PAL/NTSCConversion
VariableAspectRatio(4:3,16:9)forTV
4-digi7-segmentLEDDisplay
RS232PortforUpdating softwareandAdditionalInformation
UserFriendlyOSDMenu withFull Function
Installation byEasy Setup Guide
256 ColorsGraphicUserInterface
Easy Tuning and NetworkSearch
MultiLanguage Menu (English/Italian /French/Spanish/Germany/
Turkish/Arabic/Russian /Persian)
7-DaysEPG(ElectronicProgramGuide)forOn-Screen ChannelInformation
PIG,Small Screen Pictureon EPG
PIP,PictureinPicture
Superfast800 pagesOSDTeletextSupported and VBITeletextInserted
8FavoriteGroup and ParentLock Function
100 Satellites,4000 Channelsand 4000 transponders
ZOOMand MultiTImerfunction
AudioTone forTuning signal
6Kind ofSortfunction forChannels
@3
Reference--GeneralFeatures

1.2Accessories
l User’smanual
l RemoteControlUnit
l A/VCable
l Batteries
@4
Figure1.Accessories
UserManual
User’sManualA/VCableBatteryRemotecontrol
Reference--Accessories

@5
BasicFunction--FrontPanel
2.BasicFunction
2.1FrontPanel
1.PowerButton
The POWERbutton isused toturnthe poweron ortomakeiton Standby
Mode.
2.MENUButton
Activatethe mainmenu inviewing mode,orexitall menu.
3.OKButton
Activatethe highlighted sub menu inmenu mode and activatethe channellist
inviewingmode.
4.Up/DownButtonp/q
Change channelinviewing mode and movethe cursorup/downinmenu mode.
5.Left/RightButtontt/u
Increase/decreasethe volumeinviewing mode and change settingsinmenu
mode
6.Display (4-digi7-segment)
4-digidisplayschannelinformation.InStandbymode the 7-segmentdisplays
localtime.
7.PowerLED
Powerindicator
8.Lock LED
SignalIndicator
Figure2.FrontPanel
1 2 3 4 5 67 8

1.LNB IN13/18V500mAMax
Connectthe SatelliteDishLNB.
2.LOOPOUT
Outputthe DishLNBINsignal.
3.ANT
ConnecttoTVAntenna
4.RFOUT
ConnecttoaconventionalTV.
5.AUDIO, VIDEO
ConnecttoAudio/Video ofTV.ConnectYellowtoVideo port, connectRed
and
WhitetoAudioRightandAudioLeft.
6.0/12V
Supply12VDC tootherapparatus.
7.TVSCART/VCR SCART
ConnecttoTVsetorVCR withScartcables.
8.RS232
ConnecttoserialportofPCforsoftwareupgrade.
9.PowerSwitch
Mains90~240VAC(Autoselectable),50~60Hz,Makesuretocheck the
powerspec.
Figure3.RearPanel
@6
2.2RearPanel
u y { w }
v z | x
LNB IN
LOOPOUT
AUDIORVIDEO
AUDIOLDC 0/12V150mAOUTTVSCART
ANTENNA
RFOUT
RS232
AC 90~240v~
50~60Hz
Max.30W
BasicFunction--RearPanel
VCR SCART

You can controlthisreceiverbythisremotecontrollerwithfull function.
1.POWER:
Switchthe receiveron orsetittostandbymode.
2.MUTE:
Turnthe sound On/Off.
3.SAT:
Showthe scanned satellitelist.
4.NUMERICKEY(0~9):
Change programorinputnumber.
5.RECAL:
Movetothe previousviewed channel.
6.TV/RADIO:
Switchbetween TVand RADIO.
7.EPG(ElectronicProgramGuide):
Showthe TV/Radioprogramguide.
8.FAV:
Togetfavoritechannellistyou setbefore.
9.MENU:
Activatemainmenu orexittolivechannel.
10.EXIT:
Exitcurrentmenu step bystep.
11.CHp/q:
Change program.
12.VOLt/u:
Change volumeinviewing mode.
13.OK:
Confirm the highlighted menu item.
Open the programlist.
14.Page,PGUP,PGDN:
Page up/downon menu.
16.AUDIO:
Selectorchange the Audio.
2.3RemoteControlUnit(RCU)
@7
BasicFunction--RemoteControl
Figure4.RemoteControl

17.PAUSE:
Freezethe picture.
18.ZOOM:
PictureZooming function.
19.INFO:
Showthe information ofthe currentchannel.
press EXITbutton toexitthismenu.
20.SUB:
Showing Subtitleinformation ifthe channelscontains.
21.Multipicture
ActivateMultipicturemenu and selectpicture
22.A~Z:
Sortchannels.
23.TEXT:
Showthe teletextcontentifteletextistransmitted.
@8
BasicFunction--RemoteControl

The following diagramshowsyou the connectionsamong receiver,TV,LNB
and otherequipment, pleaseread thisfirstifyou arenotsureabou the
connection,and itwill guide you tothe correctconnection.
3.1Connecting toTV
AUDIOVIDEOTVSCARTRFIN
TV
3.Installation and Connection
AC 90~240v~
50~60Hz
Max.30W
ANTENNA
RFOUT
RS232
LNB IN
LOOPOUT
AUDIORVIDEO
AUDIOLDC 0/12V150mAOUTTVSCART
@9
Figure5.Connecting toTV
Installation and Connection--Connecting toTV&VCR
VCR SCARTRFINRFOUT
VCR
VCR SCART

3.2Connecting toDishLNB
You can connectone fixed dishLNBdirectlytothe LNBIN,orconnectat
leasttwodishLNBbyDiSEqCSwitch,you can alsoconnecttoHH mount
dishLNB.
DISHHH MOUNTDISH
LNB LNB
COMPUTER
LNB IN
LOOPOUT
AUDIORVIDEO
AUDIOLDC 0/12V150mAOUTTVSCART
ANTENNA
RFOUT
RS232
AC 90~250v~
50~60Hz
Max.30W
OR
@10
Figure6.Connecting toDishLNB
Installation and Connection--Connecting toDishLNB
VCR SCART

LNB IN
LOOPOUT
AUDIORVIDEO
AUDIOLDC 0/12V150mAOUTTVSCART
ANTENNA
RFOUT
RS232
AC 90~250v~
50~60Hz
Max.30W
DiSEqC
LNB1
LNB2LNB3
LNB4
@11
Figure7.Connecting toDishLNB
Installation and Connection--Connecting toDishLNB
VCR SCART

Aterconnecting the receivertootherrequired equipment, turnon the receiver,
thereshouldbe no channelinformation availableatthe firststartup,you need
tofollowthe proceduretosetup yourreceivertosearchthe channel.
4.1Menu Guide
During the installation thereisashortinformation showed atthe bottomofthe
menu screen whichwill guide you tosetup,afterfinishing installation,you
can enjoywatching TVorlistening toRadio.
--MainMenu--Installation
E InitialSetup
When turnon the receiver,therewill
appearaSetup Wizardmenu forlanguage
selection,timesetup and searchchannel.
press OKbutton toconfirm and proceed.
E MainMenu
Press MENU button toactivatemainmenu,
mainmenu consistsofAntennaSetting,
EasyTuning,System
Setting,ParentControland Timer
4.Installation and Operation
E Installation
SelectInstallation,the sub menu will be displayed,hereyou can setup
antenna,SearchChannel,EditeSatelliteorTransponder,ResettoFactory
Default, Saveorload channellist.
1 UseRIGHT/LEFT t/ubutton toselect
yoursubjectand press OKtoconfirm your
selection and enterthatsub menu,press
EXITbutton you can returntothe previous
menu.
@12
Installation and Operation--Menu Guide

E Antennasetup
Press OKbutton on the AntennaSetting,
you will getthiswindow.
1 Satellitelist
Thiswindowshowsthe pre-stored satellite
list, you can change satellitebyt/u,
press OKtosee the satellitelistand select
satellite.
1 Transponderlist
If you change the satellite,the transponder
will be changed automatically.You will find
the transponderlistofselected satellite
herebypressing OK.
E SwitchType
If you connectantenna toDiSEqCSwitch,
you need tosetSwitchTypeyou need to
specifythe DiSEqCinputtowhichyour
selected satellitehavebeen configured.
Pressing OKyou will getthe SwitchType
list.
@13
Installation and Operation--Menu Guide
1 LNB frequency and power
Hereyou need tocheck the LNBfrequency
according toyourantenna,setthe correct
frequency ordefine yourself, and keep LNB
powertobe 13V/18V.

4Position Auto[W/E]
Presst/ubutton,the dishwill be
motorised toWest/Eastcontinuously,
itwill stop untill itfind the bestsignal.
4ContinuouslyMove West-East
Pusht/ubutton,the dishwill be motorised toWest/Easttosearchthe
bestsignal,releasethe button will stop the moving.
4StepSize
Setthe moving step.
4Move Steps
MoveEastorWeststep bystep.
4LimitSet
DisableorenableWestlimitorEastlimit
4Save Position
Press OKbutton tosavethe currentposition you searched.
4GotoPosition
Press OKbutton tomovethe dishtothe stored position.
4GotoReference
Press OKbutton tomovethe dishto0position.
4GotoX.X(9.9)
Press OKbutton tomovethe dishtoexactposition ofthe satellite
1 USALS
SetMotorisedsystemtoUSALS,
press OKyou will getthiswindow,you can
change direction ofthe dishtoaimtothe
satelliteyou selected through the option.
@14
Installation and Operation--Menu Guide
E MotorisedSystem
If you connectreceivertoDiSEqC1.2
orDiSEqC1.3antenna,setMotorised
systemtoDiSEqC1.2orUSALS,you can
change the direction ofthe dishtoaimto
the satelliteyou selected through the option.
1 DiSEqC1.2
Almostsamefunction and operation withUSALS,butwithoutGotoX.X

1 Save channel
Channelswill be saved automaticallyafter
finishingsearching.
E ManualSearch
Pleaseselectthe transponderoffered bythe
satellitethatantenna hasbeen configured.
Selectthe LNBfrequency,polarisation
(Horizontal/Vertical),symbolrate,FEC(1/2,
2/3,3/4,5/6,7/8,Auto),Networksearch
(YES/NO),SearchType (ALL,FTAonly,
Scramblel),AdvancedPIDsearch.The
networksearchwill be applied ifyou want
tofind moretransponders.
1 InputFrequency
Inthiswindow,you can modifyfrequency,
press thet/ubutton tochange frequency,
press the numericbutton toinputfrequency.
1 Searching
Aftersetup and selection,pressing OKwill
startsearching.During searching the TV
channeland Radiochannelwill be listed
separately.
E SatelliteSearch
InSatelliteSearchmenu,satellitelistand
transponderlistarestored here,selectone
ormoresatelliteyou wanttosearchand
press OKtomark,then movethe cursorto
searchtype--ALL channels,orFTAonly,
and press OKtostartsearch.
@15
Installation and Operation--Menu Guide

E EditSatellite
Hereyou can Add,Delete,Rename,Move
Satellite.Even you can hidesatellite,once
you selectthisfunction,onlysearched and
and stored satellitewill be displayed,press
OKon one satelliteyou will hide all the
channelsunderthissatellite,when you
switchchanneltheywill notbe displayed,
butall channelswill still be edited in
ChannelManager.
E EditTransponder
Hereyou can Add,Edit,Deletetransponder
underthe satelliteyou selected.Press red
keytoswitchbetween satelliteand the
transponders.
E FactoryDefault
Press OKon the FactoryDetaultinthe
Installation menu,you will getthiswindow.
4You can choseresettype,ALL,Channel
listonly,Radiochannelonly,and Scramble
channelonly.If you choseALL,the previous
setting will be erased,suchasparental
code,favoritechanneletc..
E UserChannelList
Inthe UserChannelListyou can savethe
currentchannelsorload channelsyou
stored.
@16
Installation and Operation--Menu Guide

--MainMenu--Easy tuning
4 Usep/qbutton toselectitem,use
t/utochange setting.Thisfunction will
enablemultisatellitesearchifyourreceiver
connectstoDiSEqCSwitch.FastTuning
will enableyou tosearchstored transponder
and AutoTuning will enbableyou tosearch
newtransponderwhichisnewlyreleased.
--MainMenu--ChannelManager
4 Press ChannelManagerinthe main
menu,you will getthiswindow,hereyou
can editTVchannelsand Radiochannels,
sortchannelsand upgrade channelsvia
SDX.
1 EditTV/Radiochannel
Inthiswindowyou can selectchanneland
playchannel,lock/unlock,delete/undelete,
move,rename,exchange and skipchannel.
1 TVFavoriteand RadioFavorite
Inthiswindowyou can selectchanneland
and setthemtofavoriteindifferentcategory,
thereareeightcategoriesforyou toedit,
and you can alsorenamethe category.
@17
Installation and Operation--Menu Guide

E USALSSetup
You can setup the Dishposition tothe
satelliteyou wanttosearch,you need to
check the detailed information frominternet
and inputthe accurateparametersabout
yourlocalposition.You can setup the
rotating speed ofthe motor.When switching
the satellite,itwill popup awaiting window,
ifyou do notwantthiswindowtoappear,
you can setthisparameterto0.
E SortChannel
Inthismenu you can sortthe channelsin
differenttype,suchaslanguage(selectable),
FTA,satellite,transponder,favor(selectable)
and Alphabet.
--MainMenu--SystemSetting
E System
You can setup the menu language,audio
language,RF,TVoutputand Video output
according tothe standardofyourcountry.
SignalAudioTune will giveyou sound
indication ofthe signalstrengthinAntenna
Setting and ManualSearch.
E OSD
You can setup the menu transparency and
helpinformation formenu.Timeoutmeans
the duration ofthe infomation bar.You can
selectthe wayofdisplayofchannellisthere.
@18
Installation and Operation--Menu Guide

E Game
Therearefourgamesstored inthe receiver,
tetris,snake,pompon and pushbox,you
can playwiththe remotecontrolbyp/q
t/ubutton.
E Facility
Thisisthe calendar,and itwill giveyou the
conveniencetocheck the dateofyourday.
E Setup Wizard
Therearefourstepsforyou tosetup the
menu language,audiolanguage,current
time,and seachchannelorload channel.
You can alsogetthissetting when you
resettofactorydefault.
@19
Installation and Operation--Menu Guide
E AboutSTB
Hereisthe information aboutthe software
versionand hardwareversion.Whenyou
need servicefromthe dealeryou need to
submitthisinformation inordergo getthe
correctand fastaftersalesservice.
--MainMenu--Timerand Lock
Inthismenu,you can setup the time
according toGMT,eventtimerand setup
sleep timer(You can selectthe timelength,
orinput.).Alsoyou can setup the parenetal
lock.