HySecurity MX001092 User manual

Installation Instructions
MX001092, MX001093, MX001308, MX001908, MX002065, MX3753, MX3402
Changing the Start Switch or Capacitor
Tools Needed
Leeson Motor: Replacing the Start Switch
Leeson Motor
Motor
mounts
Capacitor (1 of 2
shown)
Start
Switch
Fastener secures the
start switch
Fastener secures
the start switch
To avoid risk of injury or death, turn off the gate operator and disconnect it from
the main power source prior to performing any of the following procedures!
Juncon box
front panel
www.SecureOpeners.com | [phone] | [email protected]

Leeson Motor: Replacing the Capacitors
Leeson Motor
Motor mounts
Capacitors with enclosures
Start Switch
Juncon box
front panel
Rubber seal
Fasteners (2 for each enclosure)
www.SecureOpeners.com | [phone] | [email protected]

Leeson Motor — External Wiring Diagram
www.SecureOpeners.com | [phone] | [email protected]

Baldor Motor: Replacing the Start Switch
Baldor Motor: Replacing the Capacitors
Baldor Motor
Capacitor enclosure
Juncon box and
front panel
Motor
mounts
Two fasteners secure the
Start Switch
Four fasteners hold
the front panel to
the juncon box
To avoid risk of injury or death, turn off the gate operator and disconnect it from the
main power source prior to performing any of the following service procedures!
Spade Connections to
Starter Switch
Pin 4
Pin 2
Pin 1
Pin 3
www.SecureOpeners.com | [phone] | [email protected]

Capacitor Enclosure Interior
Capacitor Wiring
Spring retainer
Insulator sheet
Lead end
Interior stando
White with blue stripe
White with
black stripe
One wire per
terminal.
www.SecureOpeners.com | [phone] | [email protected]

Baldor Start Switch Wiring
www.SecureOpeners.com | [phone] | [email protected]