Hytera DS-6210U5C4 User manual

DS-6210U5C4 Base Station
Owner's Manual
Version: V00
Release Date:Oct., 2012

Owner's Manual
Contents
i
Contents
1. Checking Items in the Package..........................................................................................................8
2. Product Controls..................................................................................................................................9
2.1 Interface Units of 4-carrier Base Station..........................................................................................9
2.1.1 Antenna Connector...............................................................................................................10
2.1.2 EIB........................................................................................................................................10
2.1.3 Power Supply Interface........................................................................................................12
2.2 Cartridge.........................................................................................................................................13
2.3 Channel Unit (CHU)........................................................................................................................13
2.3.1 Function................................................................................................................................13
2.3.2 Front Panel...........................................................................................................................14
2.3.3 LED Indicator........................................................................................................................15
2.4 Base Station Controller Unit (BSCU)..............................................................................................16
2.4.1 Function................................................................................................................................16
2.4.2 Front Panel...........................................................................................................................17
2.4.3 LED Indicator........................................................................................................................18
2.5 Power Supply Unit (PSU)...............................................................................................................19
2.5.1 Function................................................................................................................................19
2.5.2 Front Panel...........................................................................................................................20
2.5.3 LED Indicator........................................................................................................................21
2.6 Interconnect Backboard (ICB)........................................................................................................22
2.6.1 Front View ............................................................................................................................22
2.6.2 Rear View.............................................................................................................................23
2.7 FAN.................................................................................................................................................25
2.7.1 Front Panel...........................................................................................................................25
2.7.2 LED Indicator........................................................................................................................25
2.7.3 Rear Panel............................................................................................................................26
2.8 Divider Unit (DIU)............................................................................................................................27
2.8.1 Function................................................................................................................................27
2.8.2 Front Panel...........................................................................................................................27
2.8.3 Rear Panel............................................................................................................................28
2.9 Router.............................................................................................................................................29
2.9.1 Function................................................................................................................................29
2.9.2 Front Panel...........................................................................................................................29
2.9.3 Rear Panel............................................................................................................................30
2.9.4 LED Indicator........................................................................................................................30

Contents
Owner's Manual
ii
2.10 IP-E1.............................................................................................................................................31
2.10.1 Front Panel.........................................................................................................................31
2.10.2 LED Indicator......................................................................................................................32
2.10.3 Rear Panel..........................................................................................................................33
2.11 Combiner (COM)..........................................................................................................................33
2.11.1 Function..............................................................................................................................34
2.11.2 Rear Panel..........................................................................................................................34
3. Installation........................................................................................................................................... 36
3.1 Cable Layout...................................................................................................................................36
3.2 Safety Information...........................................................................................................................36
3.2.1 Power Supply.......................................................................................................................37
3.2.2 Working at Heights...............................................................................................................37
3.3 Installation Preparation...................................................................................................................37
3.3.1 Technical Files......................................................................................................................37
3.3.2 Personnel .............................................................................................................................38
3.3.3 Tools.....................................................................................................................................38
3.4 Unpacking Inspection .....................................................................................................................39
3.4.1 Check before Unpacking......................................................................................................39
3.4.2 Unpacking Wooden Case.....................................................................................................39
3.4.3 Unpacking Cartons...............................................................................................................40
3.4.4 Inspections...........................................................................................................................41
3.5 Installing the Cabinet......................................................................................................................41
3.5.1 Determine the Installation Position ......................................................................................41
3.5.2 Installing the Cabinet............................................................................................................42
3.6 Installing Modules into the Cabinet ................................................................................................43
3.6.1 Module Layout......................................................................................................................43
3.6.2 Installation Procedures.........................................................................................................43
3.7 Installing Cables.............................................................................................................................47
3.7.1 Equipment Status.................................................................................................................47
3.7.2 Cables ..................................................................................................................................47
3.8 Examination after Installation.........................................................................................................49
3.8.1 Equipment Status.................................................................................................................49
3.8.2 Examining the Cabinet.........................................................................................................49
3.8.3 Examining Cables ................................................................................................................49
3.8.4 Power On and Examination .................................................................................................50
3.8.5 Environment Examination.................................................................................................... 50
4. Basic Operations................................................................................................................................52

Owner's Manual
Contents
iii
4.1 Powering on....................................................................................................................................52
4.2 Powering off....................................................................................................................................52
5. Troubleshooting.................................................................................................................................53
6. Routine Maintenance......................................................................................................................... 54
6.1 Purpose...........................................................................................................................................54
6.2 Tasks ..............................................................................................................................................54
A Abbreviations......................................................................................................................................55

Figures
Owner's Manual
iv
Figures
Figure 2-1 Interface Units of 4-carrier Base Station.................................................................................. 9
Figure 2-2 Antenna Connector of 4-carrier Base Station......................................................................... 10
Figure 2-3 EIB of 4-carrier Base Station...................................................................................................11
Figure 2-4 Power Supply Interface of 4-carrier Base Station.................................................................. 12
Figure 2-5 Full Configuration for MC........................................................................................................ 13
Figure 2-6 LogicalArchitecture of CHU................................................................................................... 13
Figure 2-7 Front Panel of CHU................................................................................................................ 14
Figure 2-8 LogicArchitecture of BSCU.................................................................................................... 16
Figure 2-9 Front Panel of BSCU.............................................................................................................. 17
Figure 2-10 Front Panel of PSU...............................................................................................................21
Figure 2-11 Front View of ICB.................................................................................................................. 23
Figure 2-12 Rear View of ICB.................................................................................................................. 24
Figure 2-13 Front Panel of FAN............................................................................................................... 25
Figure 2-14 Rear Panel of FAN................................................................................................................ 26
Figure 2-15 Logical Diagram of DIU ........................................................................................................ 27
Figure 2-16 Front Panel of DIU................................................................................................................ 27
Figure 2-17 Rear Panel of DIU................................................................................................................. 28
Figure 2-18 Front Panel of Router........................................................................................................... 29
Figure 2-19 Rear Panel of Router............................................................................................................ 30
Figure 2-20 Front Panel of IP-E1.............................................................................................................32
Figure 2-21 Rear Panel of IP-E1.............................................................................................................. 33
Figure 2-22 Logical Diagram of 4-port Combiner .................................................................................... 34
Figure 2-23 Rear Panel of COM .............................................................................................................. 34
Figure 3-1 Cable Layout........................................................................................................................... 36
Figure 3-2 Removing the Cover............................................................................................................... 40
Figure 3-3 Layout of holes for a Single Cabinet...................................................................................... 41
Figure 3-4 Layout of holes for Combined Cabinet................................................................................... 42
Figure 3-5 Tightening the Bolt.................................................................................................................. 42
Figure 3-6 of Module Layout.................................................................................................................... 43
Figure 3-7 Opening the Cabinet Door...................................................................................................... 44
Figure 3-8 Disassembling the Side Door................................................................................................. 44
Figure 3-9 Loosening the Ejector............................................................................................................. 45
Figure 3-10 Installing the BSCU...............................................................................................................45
Figure 3-11 Installing the FAN..................................................................................................................46
Figure 3-12 Removing the FAN................................................................................................................46

Owner's Manual
Figures
v
Figure 3-13 Installing the Divider Unit...................................................................................................... 46
Figure 3-14 Installing the Combiner Unit.................................................................................................47
Figure 3-15 Cable Diagram......................................................................................................................47
Figure 3-16 External Cable Connection................................................................................................... 48

Tables
Owner's Manual
vi
Tables
Figure 1-1 Packing List ..............................................................................................................................8
Table 2-1 Descriptions on Interface Units of 4-carrier Base Station........................................................ 10
Table 2-2 Descriptions on Antenna Connector of 4-carrier Base Station................................................ 10
Table 2-3 Descriptions on EIB of 4-carrier Base Station ..........................................................................11
Table 2-4 Descriptions on Power Supply Interface of 4-carrier Base Station.......................................... 12
Table 2-5 Description on Front Panel of CHU.......................................................................................... 15
Table 2-6 Descriptions on CHU Indicators............................................................................................... 16
Table 2-7 Descriptions on Front Panel of BSCU...................................................................................... 18
Table 2-8 Descriptions on BSCU Indicators............................................................................................. 19
Table 2-9 Descriptions on PSU................................................................................................................ 20
Table 2-10 Descriptions on Front Panel of PSU...................................................................................... 21
Table 2-11 Descriptions on PSU Indicators.............................................................................................. 22
Table 2-12 Descriptions on Front Interfaces of ICB................................................................................. 23
Table 2-13 Descriptions on Rear Interfaces of ICB.................................................................................. 24
Table 2-14 DIP Switch Settings for ICB ................................................................................................... 25
Table 2-15 Descriptions on FAN Indicators.............................................................................................. 26
Table 2-16 Descriptions on Rear Panel of FAN....................................................................................... 26
Table 2-17 DIP Switch Settings for FAN .................................................................................................. 27
Table 2-18 Descriptions on Front Panel of DIU ....................................................................................... 28
Table 2-19 Descriptions on Rear Panel of DIU........................................................................................ 28
Table 2-20 DIU Address Settings............................................................................................................. 29
Table 2-21 Descriptions on Front Panel of Router................................................................................... 29
Table 2-22 Descriptions on Rear Panel of Router ................................................................................... 30
Table 2-23 Descriptions on Router Indicators.......................................................................................... 31
Table 2-24 Descriptions on IP-E1 Indicators............................................................................................ 32
Table 2-25 Descriptions on Rear Panel of IP-E1..................................................................................... 33
Table 2-26 Descriptions on Rear Panel of COM...................................................................................... 35
Table 3-1 Technical Files.......................................................................................................................... 38
Table 3-2 Tools and Meter........................................................................................................................38
Table 3-3 Cables Description................................................................................................................... 48
Table 3-4 Descriptions on the interface of external cable connection..................................................... 48
Table 3-5 Checklist of Cabinet Installation............................................................................................... 49
Table 3-6 Checklist of Cables...................................................................................................................50
Table 3-7 Checklist of Power Situation ....................................................................................................50
Table 3-8 Checklist of Environment on Site............................................................................................. 51

Owner's Manual
Tables
vii
Table 5-1 Troubleshooting........................................................................................................................ 53

Checking Items in the Package
Owner's Manual
8
1. Checking Items in the Package
No. Item Qty. (PCS)
1 Base Station Controller Unit (BSCU) 1
2 Channel Unit (CHU) 4
3 Power Support Unit (PSU) 2
4 Fan Unit 1
5 Divider Unit (DIU) 1
6 Combiner Unit (COM) 1
7 Cabinet Kit 1
Figure 1-1 Packing List

Owner's Manual
Product Controls
9
2. Product Controls
Note
Devices except for CHU, BSCU, PSU and ICB are optional.
2.1 Interface Units of 4-carrier Base Station
The interface units on the top of the cabinet consist of the antenna connector, extended interface
board (EIB) and power supply interface. See Figure 2-1.
Figure 2-1 Interface Units of 4-carrier Base Station
No. Name Description
1 Antenna Connector
It contains the GPS antenna connector, RX antenna

Product Controls
Owner's Manual
10
No. Name Description
connector and TX antenna connector.
2 EIB
It contains the core network interface, cabinet expansion
interface and monitor interface.
3 Power Supply Interface /
Table 2-1 Descriptions on Interface Units of 4-carrier Base Station
2.1.1 Antenna Connector
The antenna connector is illustrated below.
Figure 2-2 Antenna Connector of 4-carrier Base Station
No. Name Description
1
TX Antenna
Connector TX/RX N-connector (female)
2
RX Antenna
Connector
RX1
N-connector (female)
RX2
RX3
3
GPS Antenna
Connector
GPS1 N-connector (female)
GPS2
Table 2-2 Descriptions on Antenna Connector of 4-carrier Base Station
2.1.2 EIB
The EIB is illustrated below.

Owner's Manual
Product Controls
11
Figure 2-3 EIB of 4-carrier Base Station
No. Name Description
1 E1 Interface
E1-TX1 BNC-connector (female)
E1-RX1 BNC-connector (female)
E1-1 DB9-connector (female)
E1-2 DB9-connector (female)
E1-TX2 BNC-connector (female)
E1-RX2 BNC-connector (female)
2
Cabinet
Expansion
Interface
AUX Dedicated 72-pin interface
3 Ethernet
Interface
LAN1 RJ-45 connector
LAN2 RJ-45 connector
4 Monitor
Interface
CAN DB9-connector (female)
RS485 DB9-connector (female)
Table 2-3 Descriptions on EIB of 4-carrier Base Station

Product Controls
Owner's Manual
12
Core Network Interface
The core network interface contains the 4-path E1 interface and 2-path Ethernet interface.
Cabinet Expansion Interface
The cabinet expansion interface has 8-path extended signals. It is applied to connect to four
interconnect relay units of another cabinet, in case of interconnecting two cabinets.
Monitor Interface
The monitor interface includes one CAN-BUS interface and one RS485 interface.
2.1.3 Power Supply Interface
The power supply interface is illustrated below.
Figure 2-4 Power Supply Interface of 4-carrier Base Station
No. Name No. Name
1 Ground Bar 2 AC Input Breaker
3 AC Input Terminal 4 Surge Protection Device (SPD)
5 SPD Breaker 6 AC Output Terminal
Table 2-4 Descriptions on Power Supply Interface of 4-carrier Base Station

Owner's Manual
Product Controls
13
2.2 Cartridge
In accordance with the IEC60297 standard, the cartridge is 19 inches in width and 7U in height. Each
cartridge can accommodate four CHUs, two BSCUs and two PSUs.
The slot 5 and slot 6 of the main chassis are available for the BSCU. See Figure 2-5.
C
H
U
02
P
S
U
08
P
S
U
07
B
S
C
U
06
C
H
U
01
B
S
C
U
05
C
H
U
04
C
H
U
03
Figure 2-5 Full Configuration for MC
2.3 Channel Unit (CHU)
The CHU logically includes power amplification, TX excitation unit, baseband signal processing unit
and diversity receiver. See Figure 2-6.
RX Antenna 3
PA TX Excitation
Unit
Baseband Signal Processing Unit
Power
Diversity Receiver
TX Antenna
ICB
RX Antenna 2
RX Antenna 1
Figure 2-6 Logical Architecture of CHU
2.3.1 Function
The CHU processes and converts protocols on the physical layer and data link layer of the DMR air
interface. Physically, it consists of channel control board (CHB), TX board (TXB) and RX board (RXB).

Product Controls
Owner's Manual
14
CHB: capable of signaling processing, channel encoding/decoding, interleaving and de-interleaving,
modulation/demodulation, RF signal loop-back test and fail-soft.
TXB: capable of modulation, upward frequency conversion, filtering and D/A conversion from carrier
baseband signal to RF signal, as well as the downlink signal amplification.
RXB: capable of filtering, demodulation, downward frequency conversion, AGC and A/D conversion
from three-path carrier signal to baseband signal, as well as uplink signal amplification.
2.3.2 Front Panel
The front panel of the CHU is illustrated below.
Figure 2-7 Front Panel of CHU
No. Name Description Remarks
1 RXA Diversity RX antenna input SMA-connector (female)

Owner's Manual
Product Controls
15
No. Name Description Remarks
2 RXB RX antenna input SMA-connector (female)
3 RXC Diversity RX antenna input SMA-connector (female)
4 LEDs LED indicator /
5 RS232 Debug interface DB9-connector (female)
6 TX Transmission N-connector (female)
Table 2-5 Description on Front Panel of CHU
2.3.3 LED Indicator
The CHU indicators are described in Table 2-6.
LED
Indicator Color Status Description (in working mode) Description (in sleep mode)
PWR Green On The CHU is powered on. The CHU is powered on.
Off The CHU is powered off. The CHU is powered off.
RUN Green Flashing The CHU runs properly. \
Off The CHU does not run properly. The CHU is in sleep mode.
TX Green
On Data is present on downlink slot
2 of the CHU. \
Off Data is present on downlink slot
1 of the CHU. The CHU is in sleep mode.
RX Green
On Data is present on the uplink of
the CHU.
Data is present on the uplink of
the CHU.
Off No data is present on the uplink
of the CHU.
No data is present on the
uplink of the CHU.
ALM Red On The CHU software is faulty. The CHU software is faulty.
Off The CHU runs properly. The CHU runs properly.
PLL Red On An alarm is given for PLL unlock.
An alarm is given for PLL

Product Controls
Owner's Manual
16
LED
Indicator Color Status Description (in working mode) Description (in sleep mode)
unlock.
Off The CHU runs properly. The CHU runs properly.
Table 2-6 Descriptions on CHU Indicators
Note
In sleep mode, the CHU can receive inbound data. However, if the downlink channel is in use, the
CHU will turn to operation mode; if the downlink channel is released, the CHU will turn to sleep
mode.
2.4 Base Station Controller Unit (BSCU)
The BSCU logically consists of GPS board, main control board, synchronizing buffer, Ethernet switch,
micro processor unit and power supply. See Figure 2-8.
BSCU-GPSB
GPS Board
BSCU-MCB
Main Control Board
Synchronizing Buffer
Ethernet Switch
RS232
MPU
Micro
Processor Unit
Power
Supply
CLK，CNT
LAN1
LAN11
CAN
...
RS-485
DC-IN
BSCU ICB
GPS
RS232
VGA
USB
Figure 2-8 Logic Architecture of BSCU
2.4.1 Function
The BSCU is to manage the wireless link resources within the coverage and allocate them for different
call services.

Owner's Manual
Product Controls
17
2.4.2 Front Panel
The front panel of the BSCU is illustrated below.
Figure 2-9 Front Panel of BSCU
No. Name Qty. Description Description
1
Video
graphics
array
1 For debugging DB15-connector (female)
2 USB
Interface 4 For debugging A-connector (female)
3 RS232
Interface 1 For debugging DB9-connector (male)

Product Controls
Owner's Manual
18
No. Name Qty. Description Description
4 RST Key 1 BSCU reset /
5 LEDs 1 LED indicator /
6 SMA
Interface 1 GPS signal input SMA-connector (female)
Table 2-7 Descriptions on Front Panel of BSCU
2.4.3 LED Indicator
The BSCU indicators are described in Table 2-8.
LED Indicator Color Status Description
PWR Green On The BSCU is powered on.
Off The BSCU is powered off.
RUN Green
Flashing rapidly The BSCU is working in master mode.
Flashing slowly The BSCU is working in slave mode.
Off The BSCU is being initialized or malfunctions.
GPS Green
Flashing Functions are disabled locally.
On Functions are disabled via GPS.
Off Functions are enabled via GPS.
ALM Red On The BSCU is alarming.
Off The BSCU works properly.
CHU1~4 Green
On The link between BSCU and CHU is present.
Flashing Data is being transmitted or received over the link
between BSCU and CHU.
Off
The link is abnormal or not connected between
BSCU and CHU.
IRU1~3 Green On The link between BSCU and IRU is present.
Flashing Data is being transmitted or received over the link