4
HYUNDAI
WET/DRY VACUUM CLEANER
HYVI2012
WARNING
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, re and/or serious injury. Save all warnings and
instructions for future reference.
SAFETY WARNINGS
When using the machine, always observe the enclosed safety
warnings as well as the additional safety warnings.
The following symbols are used throughout this manual:
Denotes risk of personal injury or damage to the machine.
SAFETY INSTRUCTIONS FOR WET/DRY VACUUM
CLEANERS
• Use original accessories only.
• When picking up liquids, only use the accessories intended for
this purpose.
• Do not use the machine to pick up burning or smouldering
debris, explosive or inflammable substances and liquids.
• Keep body parts away from the vacuum opening when the
machine is running.
ELECTRICAL SAFETY
Always check that the power supply corresponds to the
voltage on the rating plate.
DESCRIPTION (FIG. A)
Your wet/dry vacuum cleaner has been designed for picking up dry
dust and debris as well as liquids.
1. On/off switch
2. Motor housing
3. Hose lock knob
4. Water outflow
5. Container
6. Container latch
7. Hose connection
8. Hose
9. Tube
10. Nozzle
11. Wheels
Package contents
The package contains the following parts:
Wet/dry vacuum cleaner
Hose
Tube
Nozzle
Crevice nozzle
Brush nozzle
Dustbag
Intake filter for liquids
Wheels (4x)
MOUNTING THE ACCESSORIES (FIG. A)
Before mounting an accessory, always unplug the
machine.
Mounting accessories for picking up dry material (g. A)
The dustbag must be used for picking up dry material.
• Remove the motor housing (2) from the container (5) by
releasing the container latches (6).
• Remove the intake filter by sliding it off the float.
• Place the dustbag in the container and slide it firmly over the
hose connection (7).
• Replace the motor housing and click the container latches firmly
shut.
• Connect the hose (8) to the hose connection (7).
NOTE: In order to ensure proper filtering when vacuuming dust
and dry material the intake filter needs removing and the
dustbag needs to be put in its place. The intake filter is only to
be used vacuuming liquids.
Mounting accessories for picking up liquids (g. A)
The intake lter must be used for picking up liquids.
• Remove the motor housing (2) from the container (5) by
releasing the container latches (6).
• Slide the intake filter over the float.
• Remove the dustbag from the container.
• Replace the motor housing and click the container latches firmly
shut.
• Connect the hose to the hose connection.
NOTE: Remove all dirt and debris from the tank. A intake filter
must be used to vacuum up wet debris. Unplug the power cord
from the wall outlet before removing the motor assembly from
the tank. Turn the motor over.
Remove the dust collection bag and install the intake filter.
Connecting the hose (g. A)
• Slide the hose lock knob (3) to the right, insert the end of the
hose into the hose connection and release the lock button.
• Place the tube (9) onto the other end of the hose.
• Place a nozzle onto the other end of the telescopic tube.
• Set the telescopic tube to the desired length by sliding the
release button into the direction of the arrow and sliding the tube
in or out.
• Switch on the machine.
Blower function
Connect the hose to the hose connection on the backside to switch
from blowing to blowing.
Always switch off the piston when changing function.
SWITCHING ON AND OFF (FIG. A)
Always check whether the correct accessories have been
mounted before switching on the machine.
For dry dust and debris
• Insert the mains plug into a mains outlet.
•Switch on the machine by setting the on/off switch (1) to position ‘I’.
• Switch off the machine by setting the on/off switch to position ‘0’.
