Hyundai NEXO fuel cell Guide

Owner's Manual | Warranty
NEXO fuel cell

Thank you for purchasing this Gen5
Premium Class Navigation.
This user’s manual explains how to use the Gen5 Premium
Class Navigation.
Before using the product, read the contents of this user’s
manual carefully and use this product safely.
· The screens shown in this manual may differ with the actual
screens of the product.
· The design and speci󳝌cation of this product may change without
prior noti󳝌cation for product improvement.
· When transferring the vehicle to another individual, include this
user’s manual so that the next driver can continue its use.
All Map Database cannot be copied without permission.
Copyright Notice: © 1987 - 2018 HERE.
You may not otherwise reproduce, modify and distribute the content without the prior written
consent of HERE Technologies and HYUNDAI MnSOFT, Inc..

시작하기General

11
Name of Each Component
Name of Each Component
Head unit
The image of this product may be different from the actual product.
MAP RADIO
NAV MEDIA
SEEK
TRACK SETUP
a(1) button
䠐Power on: Press this button in power OFF status.
䠐Power off: Press and hold this button in power ON status.
䠐Press this button to turn AV on or off in power ON status.
Volume control knob (-)
Turn left/right to control volume.
bRESET hole
Press to reset the unit.
cMAP button
䠐Press to display the map screen of the current location.
䠐Press to repeat the voice guidance when a destination is set.
dNAV button
Press to display the [Navigation menu] screen.
eRADIO button
Selects the [DAB/FM/AM] band. Each time the button is pressed, the mode is changed in
order to DAB/FM > AM > DAB/FM.
fMEDIA button
Press this button to move to the media playing screen. Press this button again to display the
[Media] menu screen.

12
Name of Each Component
gSEEK W/TRACK Sbutton
When it is pressed shortly;
䠐DAB/FM/AM mode: plays previous/next frequency.
䠐 Media mode: plays previous/next 󳝌le.
When it is pressed and held;
䠐DAB/FM/AM: changes the frequency until the button is released.
䠐 Media mode: rewinds or fast forwards the 󳝌le.
h(Custom button)
Press to move to the [Custom button] menu. After setting a desired function, press to use
the desired function. After setting it, press and hold to move to the [Custom button] menu.
iSETUP button
Press to move to the [Settings] menu.
jknob
䠐DAB/FM/AM: Turn to change the frequency.
䠐 Media mode: Turn to search for the desired 󳝌le.

13
Name of Each Component
Driver Information System (DIS) Control - Type A
The image of this product may be different from the actual product.
p
p
BACK
HOME
MENU
DRIVE
MODE
VIEW
aBACK button
䠐Press to move to the previous screen.
䠐Press and hold to move to the [HOME] menu screen.
bHOME button
䠐Press to move to the [HOME] menu screen.
䠐Press and hold to move to the map screen.
cDRIVE MODE button
Press to change drive mode.
d[
VIEW
] button (optional)
Press to turn on/off camera view.
eMENU button
䠐Press to move to the pop-up menu in each mode.
䠐Press and hold to set the split screen.
fController
Tap or rotate to navigate through the menu screens.
g[
p
] VIEW button
Press to turn on/off the parking distance warning operation.
h[
p
] button (optional)
Press to turn on/off when operating remote smart parking assist.

14
Name of Each Component
Driver Information System (DIS) Control - Type B
The image of this product may be different from the actual product.
MENU
HOME
BACK
DRIVE
MODE
p
VIEW
p
aMENU button
䠐Press to move to the pop-up menu in each mode.
䠐Press and hold to set the split screen.
bHOME button
䠐Press to move to the [HOME] menu screen.
䠐Press and hold to move to the map screen.
c[
p
] VIEW button
Press to turn on/off the parking distance warning operation.
d[
p
] button (optional)
Press to turn on/off when operating remote smart parking assist.
eBACK button
䠐Press to move to the previous screen.
䠐Press and hold to move to the [HOME] menu screen.
fController
Tap or rotate to navigate through the menu screens.
gDRIVE MODE button
Press to change drive mode.
h[
VIEW
] button (optional)
Press to turn on/off camera view.

15
Name of Each Component
Steering wheel remote control
The image of this product may be different from the actual product.
abutton
䠐Each time this button is pressed, the mode is changed. You can select the accessible
media manually from [Mode Button (Steering Wheel)] menu. Only active/available media
can be accessed.
䠐If the media is not connected, corresponding modes will be disabled.
䠐Press and hold the button to turn the AV on/off.
䠐When power is off, press the button to turn power back on.
bbutton
䠐Press the button to activate voice recognition mode.
䠐Press and hold the button to cancel voice recognition.
c/ button
Increases or decreases the volume level.
button
Press to mute the sound.
W/S button
When it is pressed shortly;
䠐DAB/FM/AM: plays broadcast frequencies saved to favourites.
䠐 Media mode: plays previous/next 󳝌le.
When it is pressed and held;
䠐DAB/FM/AM: changes the broadcast frequencies saved to station list until the button is
released.
䠐 Media mode: rewinds or fast forwards the 󳝌le.

17
Basic Operation
Basic Operation
System ON/OFF
Starting the system for the 󳝌rst time
1. Press the engine start button. Once the system is turned on, the booting process will start
and the safety warning page is displayed.
<For LHD Cars (Left Hand Drive Cars)>
<For RHD Cars (Right Hand Drive Cars)>
2. Press [Con󳝌rm]. If you want to change the system language, press [Language]. For more
details, refer to “Language”.
,Note
䠐You cannot operate the system while it is booting up. It may take some time for all of
features of the system boot up.
䠐The safety warning page is displayed every time the ignition is turned on. The
displayed warnings are related to safety, please closely read and comply with the
safety warnings.

18
Basic Operation
Turning the system off
Press and hold [1] on the head unit.
To turn the system on again, press [1] on the head unit.
,Note
Check the volume when turning on the system. Before turning on the system, adjust the
volume to a reasonable level.

19
Basic Operation
Adjusting the volume or AV ON/OFF
AV OFF
Press [1] on the head unit when the AV is ON.
AV ON
Press [1] on the head unit when the AV is OFF.
Adjusting the volume
Rotate the volume control knob [ ] on the head unit.
,Note
When you turn the unit off, the current volume level is automatically memorized. Whenever
you turn the system on, it operates at the memorized volume level.
Resetting the System
This feature is used to reset the system in the occurrence of an unforeseen error or problem.
Press “RESET” button. (The use of a clip or pin is recommended when resetting the system.)
MAP RADIO
NAV MEDIA
SEEK
TRACK SETUP

20
Basic Operation
Using the controller
This control is used to move and select menus.
Controller Description
Move in the menu by turning the controller left/right.
Push the controller up/down/left/right/diagonally to move in the
menu.
Press the controller to select menu.

21
Basic Operation
Using the Touch screen
Press the desired menu on the screen to select a menu.
,Note
If you touch the screen while driving, the attention may be scattered and cause a traf󳝌c
accident. For safety, please use after stopping.

22
Basic Operation
General operation of the menu in available mode
Split screen
This feature is used to set the item to be displayed on the split screen on the right side of the
screen by setting a checkmark the [Split screen] menu.
1. Press [Split screen] on the pop-up menu in each mode.
2. Select the desired item.
䠐[Split screen]: Selects or cancels the split screen.
䠐[FCEV]: Displays the FCEV information.
䠐[Map]: Displays the map screen.
䠐[Audio Source]: Displays the currently playing media information.
䠐[Climate]: Displays the Climate information.
䠐[Compass]: Displays the compass.
䠐[Analogue clock]: Displays analog clock screen.

23
Basic Operation
Sound settings
This menu is used to adjust the sound effects for the whole system.
1. Press [Sound settings] on the pop-up menu of available mode.
<For LHD Cars (Left Hand Drive Cars)>
<For RHD Cars (Right Hand Drive Cars)>
2. For more details, refer to the "Sound" part.
Display settings
This menu is used to control the display brightness and image rate for the whole system
1. Press [Display settings] on the pop-up menu of available mode.
2. For more details, refer to the "Display" part.

24
Basic Operation
Switching to simple view or normal view
1. Press [Simple] on each mode screen. Or press [Menu] > [Simple view].
The simple view screen appears.
2. Press [Normal] to move to the normal view. Or press [Menu] > [Normal view].
The normal view screen appears.

25
HOME screen
HOME screen
Basic operation of HOME screen
1. Press [HOME] or [ ]. The HOME screen appears.
2. Press the desired menu on the HOME screen.
3. Subsequent operations will be performed according to the desired menu selection.

26
HOME screen
Customizing HOME screen
You can change the position by pressing and holding the menu icon on the HOME screen.
1. Press and hold the desired menu icon on the HOME screen.
2. Press and drag an item to rearrange the screen.
3. Press [HOME] or [ ].

27
Favourites
Favourites
Adding your Favourite menu items to [Favourites] menu
Select your favourite items for quick and easy access.
1. Press [HOME] or [ ] > [Favourites].
2. Press [Add to favourites].
If your Favourite menu items are already added, press [Menu] > [Add].

28
Favourites
3. Select one of the [Navigation favourites], [Radio favourites] or [Shortcuts].
4. Select one of the categories.
5. Select the desired item.
䠐[Mark all]: Selects all items.
䠐[Unmark all]: Unmarks all items.
䠐[Cancel]: Exits favourites screen.
6. Press [Add].
,Note
䠐A maximum of 25 items can be added to [Favourites] menu.
䠐If you select the menu item added to [Favourites] menu, it moves to the
corresponding screen.