i-box Daybreak User manual

DAB/DAB+/FM Alarm Clock Radio with Wireless Charging
DAB/DAB+/FM Weckerradio mit Drahtlos-Aufladefunktion
Radio Reloj Despertador DAB/DAB+/FM con carga inalámbrica
Radio-réveil DAB/DAB+/FM avec zone de chargement sans fil
Radiosveglia DAB/DAB+/FM con ricarica wireless
Wekkerradio DAB/DAB+/FM met draadloos opladen

Daybreak | 02www.iboxstyle.com
i-box Daybreak - User Guide
Introduction
The i-box Daybreak is much more than a bedside alarm clock radio additional.
Additional features include 10W fast charging for any Qi-enabled device and
additional charging via the 2x 2.1A USB ports. The independent dual alarms offer
weekday options and a choice of radio, tone or natural sounds to wake you. As well
as listening to stereo DAB and FM radio over the 5W speakers you can playback
your favourite tunes via Bluetooth.
Contents
1. Safety information
Safety information 3
2. Getting to know
your alarm clock
Box contents 5
Control & features 5-6
3. Getting started
Setting the clock 7
Setting the alarm(s) 7
Enabling/Disabling the alarm 8
Snooze 8
Controlling the dimmer 8
Contents
Bluetooth connection/operation 9
DAB Radio operation/presets 9
FM Radio operation/presets 9
Sleep mode 10
Nature sound tracks 10
AUX In mode 10
Headphone jack 10
Wireless charging 10
USB Charging 11
4. Other Information
Specifications 11
Disclaimer 12
Declaration of conformity 12
Technical support 12

03 | Daybreak
Important - Please read these instructions fully before
installing or operating your speaker.
Keep away from flame sources such as lighted candles.
Do not expose to dripping or splashed fluids. Objects
filled with liquids, such as vases, must not be placed
close to the speaker.
The unit should not be exposed to direct sunlight, very
high or low temperature, moisture, vibrations, strong
magnetic fields, high frequencies and
dusty environments.
Do not place the product in enclosed bookcases or
racks without proper ventilation. Ventilation should not
be impeded by covering the ventilation openings with
items, such as newspapers, table-cloths, curtains, etc.
Never attempt to insert wires, pins or other such
objects into the vents or openings of the unit.
Do not disassemble or modify the alarm clock, there
are no user serviceable parts.
If the alarm clock is damaged in anyway or
malfunctions do not use. Consult a qualified
service engineer.
Do not use abrasives, benzene, thinner or other
solvents to clean the surface of the unit. To clean, wipe
with clean soft cloth and a mild detergent solution.
Do not dispose of this product with household
waste at the end of its life cycle; hand it over to
a collection centre for the recycling of electrical
and electronic appliances.
Caring for your Alarm Clock
Important Safety Information
i-box Daybreak - User Guide

Daybreak | 04www.iboxstyle.com
23
:
45
DAB
1
PM
CAPITAL XTRA
PRESET
ENTER INFO
SCAN MENU
Box Contents
i-box Daybreak Alarm Clock
Radio with wireless charging
DC power adaptor
Getting to know your alarm clock
Before you get started please be sure to read through the safety information on
pages 2-3.
Top Panel
Controls & Features
1. Wireless charging area
2. Volume -
3. Volume +
4. Previous track, station/
Down key
5. Next track, station/
Up key
6. Snooze/Sleep/Dimmer
7. Enter/Pause/Play/
Autoscan
8. Alarm set/Info/Menu
9. Clock set/Preset
10. Enter Standby Mode
(long press >2s)/
Change Mode (short
press )
2345678
1
910

05 | Daybreak
23
:
45
AUX
FM
DAB
12
PM
SLEEP
AUxiliary i nput
Back Panel
Bottom Panel
Display
21
20 23
1x AAA
1x AAA
27
DC 9 V
AU X IN US B 5V US B 5V
11 13 14 15 16 12
17
24
19
Please Note: These batteries
are for backup only and will
not power your Daybreak
just save time, date and
alarm settings when mains
power is disconnected.
22
Connections
1 1 . DC adapter jack
1 3 . Headphone socket
1 4 .AUX In
1 5 . USB Charging port 1
1 6 .USB Charging port 2
1 2 . Wire antenna
Features
1 7 . Back up battery
compartment door
Features & Indicators
1 8 .Wireless charging
indicator
1 9 . Alarm 1 & 2 set ON
20 .PM Indicator
21. Time
22 .Sleep mode indicator
23 .Snooze indicator
24 .Bluetooth indicator
25 .FM/DAB indicator
26 .Date/Station/FM Freq.
Nature Sound/Mode
27 . AUX mode indicator
18
25 26

Daybreak | 06www.iboxstyle.com
Setting 24 Hour / 12 Hour display
By default the Daybreak will display a 24 hour clock to change to a 12 hour AM/
PM display. Long press the Standby/ Mode key 10 then press the clock key 9to
change clock settings.
Setting the clock, Time and Date manually
Before getting started
Before setup or making connections please unwind the wire antenna 12 fully.
To power your Daybreak connect the power adapter supplied to an electrical outlet
and the power socket 11 on the back panel. Your Daybreak will power up in standby
mode.
DC 9V
AUX I N USB 5 V USB 5 V
11 12
Unwind Antenna Fully
Setting the Hour
Setting the clock automatically
In standby mode press the Standby/mode key 10 once to enter DAB mode
your Daybreak will search for the first available DAB station once connected
time and date will be set automatically.
0:00
➡0
1 -- 1 -- 2020 ➡24 HOUR
➡12
HOUR
/
0:00 0:00
0:00
AM 12 -- 00
/
➡AM
10 -- 00
/
0:00
Setting the Minutes
0:00
AM 10 -- 00
/
➡AM
10 -- 23
/
0:00

07 | Daybreak
➡ALARM
1 SETUP
/
➡ALARM 2 SETUP
/
Setting Alarm (In Standby mode)
Press the alarm key 8 to enter alarm setting mode then use the previous and next
keys /4or 5to change the time and options then the enter or alarm key
/
8 or 7to confirm each setting.
To set an alarm select: Alarm 1 or Alarm2 ➡ On Time➡Duration ➡ Sound Source:
➡ Alarm ON/OFF Press /
8 or 7to save the setting. If an alarm is saved as
ON the corresponding Alarm Set 1/Alarm Set 2 icon(s) 19 12will be displayed
on the left of the screen. These icons will also flash during setup. If you pause for
10 seconds during setup you will see a “NOT SAVED” message and you will need to
restart the Alarm setting process.
Select
Alarm
1or 2
Set
Alarm
ON time
AM 10 -- 23
/
➡AM
7 -- 23
/
➡AM
7 -- 23
/
➡AM
7 -- 15
/
AM 7 -- 15
/
to select or go to
set AM/PM
set minutes
set hour
Setting the AM/PM (12 Hour display only)
0:00
AM 10 -- 23
/
➡PM
10 -- 23
/
0:00
Setting the Date
0:00
0 1 -- 1 -- 2020
/
➡22
-- 1 -- 2020
/
0:00
Day
0:00
22 -- 1 -- 2020
/
➡22
-- 1 1 -- 2020
/
0:00
Month
0:00
22 -- 1 -- 2020
/
➡22
-- 1 1 -- 202 1
/
0:00
Year
will be displayed top
left of the screen
when time is PM

Daybreak | 08www.iboxstyle.com
to select
60 ➡90 ➡15 ➡30
Set Duration
of alarm in
minutes
➡45
/
Set Sound
Source
BUZZER
/
BIRDS ..WAVE
/
or next
5 Nature Tracks
x 1-4
Birds, Brook, Night Bonfire, Storm, Wave
to select
DAB
/
LAST OPENED 6 CAPITOL
/
Stored
Presets
FM
/
LAST OPENED
03 96
,60MHZ
/
Stored
Presets
Select Alarm
Period DAILY
ONCE
/
22 -- 1 1 -- 2020 23 -- 1 1 -- 2020
if ONCE, date
must be set
WEEKENDS
/
WEEKDays
/
to select or next
Select Alarm
OFF/ON
ALARM OFF
/
ALARM ON
/
SAVED
to select or next
1will be displayed on the left of the screen when Alarm 1 is set to ON.
2will be displayed on the left of the screen when Alarm 2 is set to ON.
Alarm Stop / Snooze
When the alarm sounds you can press the Snooze key to delay it by 9 minutes or press
the function key to stop it.
➡ ➡
9 minutes
Snooze
➡
Off
Stop
will be displayed top
right of the screen
when Snooze mode
has been entered

09 | Daybreak
DAB
/
LAST OPENED 6 CAPITOL
/
DAILY ONCE
/
22 -- 1 1 -- 2020 23 -- 1 1 -- 2020
WEEKENDS
/
WEEKDays
/
ALARM OFF
/
ALARM ON
/
SAVED
➡12:23 ➡12:23 ➡12:23 ➡12:23 ➡12:23
x1 x2 x3 x4 x5
Dimmer
When the Daybreak is in the following modes: Standby, FM, Bluetooth, Nature sound
and AUX IN, you can press the SNOOZE/SLEEP/ DIMMER key 6 to adjust the
brightness of the display in steps (from 100% to Off ).
12:23
100% 80% 60% 40% 20%
OFF
x6
06:45
1
FRI SAT SUNMON TUE WED THU
2
BT
AUX
AM
2
1
MHz
Alarm volume
Vol: 0-8 over 40s
/
➡
When the electronic (Beep), FM radio and Nature sound alarms are activated they will
start quietly and gradually increase in volume from 0 to 8 over 40 seconds.
You can use the Volume +/- keys 2& 3at any time to adjust the alarm volume.
12:23
To adjust Alarm
volume VOL
-VOL +
Select mode
Your Daybreak is ideal for use as a speaker for music playback from your smartphone
and other mobile devices either via the AUX IN socket or Bluetooth. It can also be used
as a DAB or FM radio or to play a range of pre-loaded Nature Sound Tracks.
To scroll through these modes press mode key 10 . Press enter key to select a
mode
➡
DAB
➡
FM
➡
BLUETOOTH
➡
BIRDS
➡
AUXILIARY INPUT

Daybreak | 10www.iboxstyle.com
DAB Radio
Make sure the the aerial is fully unwound.
Press the mode key
10 to find DAB mode. Press the enter key to select.
Long press the Play/Scan key 7to Auto Scan for DAB stations.
After scanning is complete use the previous and next keys
4or 5to
scroll through the aphabetical list of DAB stations found.
DAB Radio saving presets
You can now save the station playing to one of the 30 DAB presets. Long press the
preset key 9and use the previous and next keys
4or 5to scroll to an
empty preset position, press enter to store.
DAB Radio play presets
Short press the preset key 9and use the previous and next keys
4or 5
to scroll through preset positions, press play 7to listen.
DAB Menu
To enter the menu long press the 8key, then the mode key
5to see
options available press the enter key to enter one of these submenus.
BBC R 1
➡
0 1 [EMPTY]
/
➡
06 [EMPTY]
➡
STORED
>2s
PRESET
Full scan (Auto Scan): press the ENTER key 7, a progress bar will be displayed
and the number of stations found.
Manual tune:If you know the frequency of a station you can search for it using
this option. Press key 7to enter, use
4or 5to scroll through DAB
frequencies for the one you want then press key 7to select. Press the alarm/
menu key 8to exit the search and return to the menu.
➡
<SYSTEM >
➡
<FuLL SCAN >
➡
<MANUAL TUNE>
➡
<DRC >
➡
<PRUNE >
>2s

11 | Daybreak
Prune: Setting Prune to <Yes> clears stations with no signal reception from the DAB
“Station list” when you next perform a Full scan. Select Prune in the Menu and use the
previous and next keys /4or 5to select Yes/No press the ENTER key 7,
then press the alarm/menu key 7to exit.
DRC: Dynamic Range Control can make quieter sounds easier to hear when your
radio is used in a noisy environment. This function is only available for some DAB
stations. Select DRC in the Menu use the previous and next keys /4or 5to
choose high/low/off.
System Menu
The system menu offers an alternate way to set Time and date to the one previouly
described, also a Factory reset option and access to Software version information.
FM radio operation
Press 10 key repeatedly to enter FM mode.
Long press 7to auto scan, available stations will be saved automatically to the
preset positions, up to 30 if this many are found.
Alternatively press the (2) or (4) keys to scan backwards or forwards through
the frequencies to the previous or next station available. Save the station found to a
Preset if you want to keep it.
FM Radio saving presets
You can now save the station playing to one of the 30 DAB presets. Long press the
preset key 9and use the previous and next keys
4or 5to scroll to an
empty preset position, press enter to store.
FM Radio play presets
Short press the preset key 9and use the previous and next keys
4or 5
to scroll through preset positions, press play 7to listen.
FM 93,00MHZ
➡
0 1 [EMPTY]
/
➡
06 [EMPTY]
➡
STORED
>2s

Daybreak | 12www.iboxstyle.com
Scan setting: choose <All stations> or <Strong stations only>
If you have a strong signal you may want to choose “strong stations only” to limit
the number of stations found and make sure they have a clear signal.
Audio setting: In the FM menu press next and enter then choose <Stereo
allowed> or <Forced mono>. If you have a weak signal “Forced mono” may give a
clearer, better balanced sound.
➡
Pause/Play
➡
Previous Track
➡
Next Track
➡
Volume +
➡
Volume -
➡
Standby
>2s
Play audio on your Bluetooth device, see below for playback options on your Daybreak.
Bluetooth
1. Use the mode key
10
to select Bluetooth make sure your device is in Bluetooth
mode. The Daybreak will search for the last connected device and the Bluetooth icon
24
will flash.
2. If the last connected device is not available. The Daybreak will search for other
devices and will appear in your device’s Bluetooth menu as “i-box Daybreak”.
3. Select the Daybreak and the “BT” icon will appear in the Daybreak’s display when
connection is successful.
VOL
-
VOL
+
FM Menu
In FM mode long press the 8menu key, then
4or 5keys to see the
options available press the enter key to enter one of these submenus.
➡
<SCAN SETTING>
➡
<AUDIO SETTING>
➡
<SYSTEM >
➡ ➡
Connect
Bluetooth SCAN
On
Bluetooth devices have been found
AVAILABLE DEVICES
i-box Daybreak
Bluetooth SCAN
On
1 Bluetooth device is connected
PAIRED DEVICES
i-box Daybreak
Connected
2
3
:
45
1
BLUETOOTH
2
3
:
45
1
BLUETOOTH

13 | Daybreak
Disconnect
>2s
7:28 BT
➡
7:28 BT
To disconnect your Bluetooth device press and hold down the play key for 2 seconds.
➡
SLEEP OFF
➡
SLEEP 15 SLEEP 30 SLEEP 45 SLEEP 60 SLEEP 90
x1 x2 x3 x4 x5
>2s x1-5
Sleep function (In FM/Bluetooth/nature sound track mode )
This function is ideal if you want to listen to the radio, your Bluetooth device or one
of the nature sound tracks while you drift off to sleep. You can set your Daybreak to
switch off automatically after the selected time (in minutes) has elapsed.
Play the FM radio, your Bluetooth device or select and play a nature sound track
then follow the settings below:
Playing the Nature sound tracks
Ideal for bedtime listening, choose one of four soothing tracks recorded from
nature press
the mode key
10 repeatedly to access this mode press 4or
5keys to choose a track:
AUX IN
Connect any audio device to the 3.5mm socket 14 on the back of your Daybreak
press the mode key 10 repeatedly to access this mode: Select and play audio on
the device, see below for playback options on your Daybreak.
➡
AuxilIary input
➡
Volume +
➡
Volume -
➡
Standby
>2s
VOL
-
VOL
+
➡
BIRDS
➡
BROOK
➡
NIGHT BONFIRE
➡
STORM
➡
WAVES
Headphone Jack
For private listening to any audio output from the Daybreak connect your
headphones to the 3.5mm jack socket 13 on the back panel.

Daybreak | 14www.iboxstyle.com
Wireless charging
If your phone has Qi wireless charging
capability you can use the charging
panel on the top of the Daybreak to
charge it.
Please Note: Wireless charging is likely
to interfere with radio reception
therefore we advise you not to try
listening to FM radio during charging.
1. Centre* your smartphone on the
cross in the middle of the
charging panel (1).
2. The wireless charging icon will be displayed in the bottom right corner of the
LCD panel while your phone is charging and the battery charge status can be
seen on your phone’s display.
Please Note: Your phone will not charge when the Daybreak is in backup mode (not
being powered by the power adapter).
If problems occur when charging or if charging does not start:
•*Normally your smartphone should be centred on the charging pad as shown.
However some phones may need to be placed slightly off centre. As the built-in
wireless receiver may not be centred inside the phone. This varies by brand/model.
•Remove your smartphone from its case if the thickness of the case exceeds
5mm or if it contains metal.
•The charging time varies depending on the charging capacity of the battery and
its current residual capacity.
•The components may heat up during the charging process. They will slowly cool
down again after the charging process.
USB charging ports
1. You can charge two external devices by connecting them to the USB charging
ports (15 & 16) on the back of the your Daybreak.
2. Your devices battery charge status will usually be shown on it’s display.
•There may be some radio interference while charging.
•Please do not try to charge the same device using the wireless charging function
and one of the USB charging ports (15 or 16) at the same time.
PRESET
ENTER INFO
SCAN MENU
62% Charged

15 | Daybreak
Backup batteries
Please Note: These batteries are for backup only and will not power your Daybreak
just save the time, date and alarm settings when mains power is cut or disconnected.
The Daybreak has a backup battery feature. Please insert 2x AAA batteries (not
supplied) into the battery compartment on the underside of your Daybreak (see
page 6). This will ensure that time and alarm settings are remembered if the
Daybreak is unplugged or there is a power cut.
Specifications
Power Adaptor Input: 100-240V~50/60Hz
Power Adaptor Output: 9V𝌂3.5A, 31.5W
Wireless Charging: 10W
USB Outputs: 2x 5V𝌂2.1A
Speaker Output 2x 5W
DAB/DAB+ Frequency Range: 174.928MHz (5A) - 239.200MHz (13F)
FM Frequency Range: 87.5 - 108MHz
Presets: 30 DAB, 30 FM
Backup Battery Requirement: 2x AAA 1.5V
Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore
some of the instructions, specifications and pictures in this documentation may
differ slightly from your particular situation. All items described in this guide are for
illustration purposes only and may not apply to your particular situation. No legal
right or entitlements may be obtained from the description made in this manual.
Declaration of conformity
Hereby, Philex Electronic Ltd. declares that the radio equipment: Lite Bedside Alarm
Clock Radio for radio broadcast reception in domestic premises is in compliance
with the Radio Equipment Directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following internet address: www.philex.com/doc
Technical support
For further help, advice, information or live chat visit www.iboxstyle.com

Daybreak | 16www.iboxstyle.com
DE i-box Daybreak - Benutzerhandbuch
Einleitung
Das i-box Daybreak ist weit mehr als ein Weckerradio, denn es bietet eine Reihe
an erstaunlichen Funktionen.Diese umfassen eine 10 W-Schnellaufladefunktion
für jedes Qi-fähige Gerät und zusätzliche Lademöglichkeiten über die beiden
USB-Ladeanschlüsse von jeweils 2,1 A.Die unabhängigen Doppelalarme bieten
Wochentagsoptionen und eine Auswahl zwischen Radio, Wecktönen oder
natürlichen Klängen zum Aufwachen.Über die Lautsprecher mit einer Leistung
von jeweils 5 W können Sie nicht nur DAB und FM-Radio in Stereo hören. Das
Daybreak-Weckerradio ermöglicht zudem die Wiedergabe Ihrer Lieblingsmelodien
über Bluetooth.
Inhalt
1. Sicherheitshinweise
Sicherheitshinweise 17
2. Ihr Weckerradio - Überblick
Lieferumfang 18
Bedienung und Funktionen 18-19
3. Zu Beginn
Uhr einstellen 20
Alarm(e) einstellen 21
Enabling/Disabling the alarm 22
Schlummerfunktion 23
Dimmer regeln 23
ntents
DAB-Radio-Betrieb/Voreinstellungen 24
FM-Radio-Betrieb/Voreinstellungen 25
Bluetooth-Verbindung/-Betrieb 26
Schlafmodus 27
Natürliche Klänge 27
AUX-In-Modus 27
Kopfhörerbuchse 27
Drahtloses Aufladen 28
USB-Ladeanschluss 28
4. Weitere Informationen
Haftungsausschluss 29
Konformitätserklärung 29
Technischer Support 29

17 | Daybreak
Wichtig - Bitte lesen Sie sich diese Anweisungen vor
der Installation und dem Betrieb Ihres Weckerradio
vollständig durch.
Von Flammen wie etwa brennenden Kerzen fernhalten.
Kontakt mit tropfenden oder verspritzten Flüssigkeiten
vermeiden. Mit Flüssigkeiten gefüllte Gegenstände wie
etwa Vasen dürfen nicht in der Nähe des Weckerradio
platziert werden.
Das Gerät sollte vor direktem Sonnenlicht, sehr
hohen oder niedrigen Temperaturen, Feuchtigkeit,
Vibrationen, starken Magnetfeldern, hohen
Frequenzen und staubigen Umgebungen geschützt
werden.
Die Belüftung darf nicht dadurch behindert werden,
dass die Belüftungsöffnungen mit Gegenständen wie
Zeitungen, Tischdecken, Vorhängen usw. abgedeckt
werden.
Versuchen Sie niemals, Drähte, Stifte oder ähnliche
Gegenstände in die Lüftungsschlitze oder Öffnungen
des Geräts einzuführen.
Zerlegen und modifizieren Sie den Weckerradio nicht.
Es gibt keine vom Benutzer zu wartenden Teile.
Wenn der Weckerradio beschädigt ist oder
Funktionsstörungen auftreten, benutzen Sie ihn
nicht. Wenden Sie sich an einen qualifizierten
Servicetechniker.
Verwenden Sie keine Scheuermittel, Benzin,
Verdünner oder andere Lösungsmittel, um die
Oberfläche des Geräts zu reinigen. Zur Reinigung
mit einem sauberen weichen Tuch und einer milden
Reinigungslösung abwischen.
Entsorgen Sie dieses Produkt am Ende seines
Lebenszyklus nicht iim Hausmüll. Übergeben
Sie es einer Sammelstelle für das Recycling
von Elektro- und Elektronikgeräten.
Pflege Ihres Weckerradio
Wichtige Sicherheitsinformationen
DE i-box Daybreak - Benutzerhandbuch

Daybreak | 18www.iboxstyle.com
23
:
45
DAB
1
PM
CAPITAL XTRA
PRESET
ENTER INFO
SCAN MENU
Lieferumfang
i-box Daybreak-Weckerradio
mit Drahtlos-Aufladefunktion
Gleichstrom-Netzteil
Ihr Weckerradio - Überblick
Vor Gebrauch bitte die Sicherheitshinweise auf den Seiten 2-3 durchlesen.
Oberseite Bedienelemente und
Funktionen
1. Drahtlos-Aufladebereich
2. Lautstärke -
3. Lautstärke +
4. Vorheriger Titel/
Sender/Rücklauftaste
5. Nächster Titel/
Sender/Vorlauftaste
6. Schlummer/Schlaf/
Dimmer
7. Eingabe/Pause/
Wiedergabe/ Autoscan
8. Alarmeinstellung/Info
Menü
9. Uhreinstellung/
Voreinstellung
10. Standby-Modus-Taste
(lang drücken >2s)/
Modus ändern
(kurz drücken )
2345678
1
910

19 | Daybreak
23
:
45
AUX
FM
DAB
12
PM
SLEEP
AUxiliary i nput
Rückseite
Unterseite
Display
21
20 23
1x AAA
1x AAA
27
17
24
19
Hinweis: Diese Batterien dienen
lediglich als Reserve und nicht für den
Betrieb des Daybreak-Weckerradios.
Sie gewährleisten lediglich die
Speicherung der Uhrzeit-, Datums-
und Alarmeinstellungen, wenn das
Gerät nicht mit dem Hauptstromnetz
verbunden ist.
22
Verbindungen
1 1 . Gleichstrom-
Netzteilanschluss
1 3 . Kopfhörerbuchse
1 4 .AUX-In-Anschluss
1 5 .USB-Ladeanschluss 1
1 6 .USB-Ladeanschluss 2
1 2 . Drahtantenne
Merkmale
1 7 . Reservebatteriefachab-
deckung
Funktionen und Anzeigen
1 8 .Drahtlos-Ladeanzeige
1 9 . Alarm 1 & 2 aktiviert
20 .PM Anzeige
21. Uhrzeit
22 .Schlafmodus-Anzeige
23 .Schlummermodus-
Anzeige
24 .Bluetooth-Anzeige
25 .FM-/DAB-Anzeige
26 . Datum/Sender/FM-Freq.
Natürlicher Klang/Modus
27 . AUX-Modus-Anzeige
18
25 26
DC 9 V
AU X IN US B 5V US B 5V
11 13 14 15 16 12

Daybreak | 20www.iboxstyle.com
24-Stunden- / 12-Stunden-Anzeige einstellen
Das Gerät ist standardmäßig auf eine 24-Stunden-Uhr voreingestellt. Um auf
eine 12-Stunden-Uhr mit einer Anzeige der ersten und der zweiten Tageshälfte
umzustellen, die Standby-/Modustaste 10 lange drücken, dann die Uhrtaste 9
drücken, um die Uhreinstellungen zu ändern.
Manuelle Einstellung von Uhr, Uhrzeit und Datum
Vor Beginn
Vor dem Einrichten des Weckerradios oder dem Herstellen von Verbindungen die
Drahtantenne 12 zuerst ganz abwickeln.
Zum Einschalten des Geräts das mitgelieferte Netzteil an eine Steckdose und die
Netzteilbuchse 11 an der Rückseite des Geräts anschließen. Dann schaltet sich das
Daybreak-Weckerradio im Standby-Modus ein.
Stunde einstellen
Automatische Uhreinstellung
Im Standby-Modus die Standby-/Modustaste 10 einmal drücken, um in den
DAB-Modus zu gehen. Dann sucht das Daybreak-Radio nach dem ersten
verfügbaren DAB-Sender. Wenn das Gerät angeschlossen ist,
werden Uhrzeit und Datum automatisch eingestellt.
0:00
➡0
1 -- 1 -- 2020 ➡24 HOUR
➡12
HOUR
/
0:00 0:00
0:00
AM 12 -- 00
/
➡AM
10 -- 00
/
0:00
Minuten einstellen 0:00
AM 10 -- 00
/
➡AM
10 -- 23
/
0:00
DC 9V
AUX I N USB 5 V USB 5 V
11 12
Antenne ganz abwickeln