I-Data HDMI-KVM2 User manual

U s e r M a n u a l
HDMI KVM EXTENDER over Network Cable
Specifica tions
HDMI 1.3
Audio support
Items
Power supply
black
HDMI resolution
supported
Video bandwidth
640*480@60Hz 800*600@60Hz 1024*768@60Hz
1280*720@60Hz 1360*768@60Hz 1440*900@60Hz
1400*1050@60Hz 1680*1050@60Hz 1920*1080@60Hz
5V/1A*2pcs
109.6(L)x89.5(w)x26.3(H)mm*2pcs
PCM (44.1KHz, 48KHz)
HDCP version
HDCP1.2
≤70Mbps
HDM version
Type A ,19 pin , Fe male
LAN co nnector
Operation temperaure 0℃〜50℃
Relative humidity 10-95% (Noncond ensing)
TX:160g RX:170g
RJ -45
Q：Abnormal color display or flashing af ter all the devices are well
connected?
A：1): Pls press reset button of HDMI extender.
2): Make sure the network cable is made according to the
standard of IEEE-568B.
Q：USB does not wor k？
A：Re-install the driving sof tware，check and make sure th e USB cables
are connected well, then reset Transmitter or Receiver.
HDMI conn ector
Power Consumption
Dimensions
Color
Weight
Disclaimer
5.Switch Conne ction
PC
NOTE：Tran smissio n distance de pends on ty pe of net work cable,
CAT5:8 0m，CAT5E：1 00m， CAT6:1 20m.
FAQ
Q：Yellow light of Lan port is flashing but slowly?
A : 1) : Check whether HDMI Extender Trans mitter and HDMI Extender
Receiver is reversed.
2): Check whether HDMI source device output HDMI si gnal correctly.
3): Change the HDMI cable of Transmitter.
Q: Yellow light of Lan port is flashing quickly but no display?
A: 1): If HDMI so urce is gr aphics card, please set the resolution to be
suppor ted by display .
2) : Check whet her HDMI cable of Receiver is well connected.
3): Change the HDMI cable of Receiver.
Q: Yellow Led light of Lan port is not light?
A: 1): Check co nnection of network cable.
2): Network ca ble is too long.
The product name and b rand name may be registered trademark of
related manufacturers.TM and ® may be omitted on the user manua l.
The pictures on the user manual are just for reference,and there may
be some slig ht difference with the real products.
We reserve the rights to make changes without fur ther notice to a
product or system described herein to improve reliability, function
or design.
HDMI
USB cable
Tran smi tte r TX
Switch Switch*N
TV
Rec eiv er RX
NOTE：Point to mul ti-point co nnectio n via switc h is suppor ted too,but und er point to
multi-p oint config uration , it is stron gly rec ommended to operate KVM functio n on
one rec eiver onl y at the same tim e.
Specification
key boa rd/m ouse
TX<3.5w R X<3.5w

Package Content Panel Introduction
1.HDMI E XTENDER T X (Transmit ter)
1Power input（DC5V） 5
USB port：to connect with PC
3
Power indicator
USB connec tion indicator
2HDMI signa l input
6
4
Important Safety Instruction
1. Do not mix up the transmitter and receiver before instruction
2. Do not unplug the device ,when it is in using,keep distance from
inflammable and explosive devices.
3. Power Supply :DC 5V ,Use only the supplied power supply unit ,
Do not use the power supply if it is damaged.
Product Introduction
This is a HDMI KVM EXTENDER, is made up of a transmitter unit
(local site) and a receiver unit(remote site) . The HDMI signal can
be extended up to 120 meters via network cable, and the resolution
supported is up to 1080p@60Hz. It allows access to a computer
system from a remote console by USB connectors(USB keyboard
and mouse). It is perfect for factory and construction sites, or any
type of installation where the console needs to be in a conveniently
accessible location. It is also useful for control and security purposes.
Therefore it is wildly used in command center, data control center,
operation rooms in military, bank , government, enterprise etc .
1237
6
Reset button
LAN signal output
7
2.HDMI E XTENDER R X (Receiver)
HDMI KVM EX TE NDER TX x1pcs HDMI KVM EX TE NDER RX x1pcs
User manu al ×1pcs
Power supply x 2pcs
4、General Connection
Transmission distance can be up to 12 0 meters for 1080p
over one CAT6
PC
3. Suppor ted OS and version
Windows 7, Windows 7 x64, Windows Ser ver 2008, Windows S erver
2008 x64, Windows Vista, Windows Vista x64, W indows Server 2003,
Windows XP, Windows XP-x64, Windows 2000, Wi ndows ME,
Windows 98SE
Features
1.Extend HDMI signal up to 120 meters via a single network cable
2.High resolution supported is up to 1080p@60Hz
3.LED indicators, know the status of power and USB connection
easily
4.Support KVM function, remote control conveniently
5.Support LAN standard 802.3 ethernet 10/100/1000Mbps
6.Compliant STP and UTP CAT5/5E/6 network cables
7.Aluminium alloy housing design, stable and durable
Power input（DC5V） 5
USB port：to connect with
keyboard/mouse
Power indicator
USB connec tion indicator
HDMI signa l output
6
Reset button
LAN signal input
7
12347
56
5
Follow the s tanard of IEEE-568B:
1- Orange/w hite
2- Orange
3- Green/white
4- Blue
5- Blue/whi te
6- Green
7- Brown/white
8- Brown
Installation Procedures
1.How to make a CAT5E/6 network c ake
HDMI
USB cable
Tran smi tte r TX
TV
Rec eiv er RX
2.Install driving Software of computer USB po rt before
using this d evice
Chinese _C H34 XSE R_D riv er English_ CH3 4XS ER_ Dri ver
2.2 No need restar t when installa tion completed
USB
1
3
2
4
CD(USB dr iver
software) x1pcs
4
key boa rd/m ouse
1. So urc e devi ces：PC o r othe r devi ces wi th HDM I grap hic s c ard
2. Di splay devices：W ith HD MI inp ut por t , SDT V, HDTV, and m onitor
3. Ne two rk cab les：
UTP /STP C AT5E/6 network c able s, whi ch fol low ing th e s tan dard of
IEE E-568B.
Transmi ssion length: CAT5 80m/CAT5 E 100m /CAT 6 1 20m .
Install ation Requirements
“Chinese _ CH34XSER_Driver “is for Chinese version
“English _ CH34XSER_Driver “ is for Englis h ve rsion
2.1