I-Data HDMI-MX414 User manual

User Manual
4×4 HDMI Matrix Switch
1) Connect all your HDMI source devices to this product's inputs
via HDMI cables.
2) Connect up to the HD display devices on the HDMI outputs via
HDMI cables.
3) Power on all source device, this Matrix Switch and display device,
then it works.
4) Select/switch inputs and outputs via IR remote , buttons or
RS232 command.
FAQ
Q: No video/audio signal output on the displays?
A: 1) Please check and make sure the Matrix Switch is connected well
and powered.
2) Please check and make sure all HDMI cables are connected well
3) Please check and make sure the input channel of displays are
correct.
Q: Picture quality is not fluent and stable ?
A: 1) Please check and make sure all HDMI cables are connected well.
2) Try to connect the source device to display device directly, or
change to another source device for a tr y to see the picture quality.
3) Please use high quality HDMI1.4 standard cable when HDMI 4Kx2K
signal input.
HDMI IN
HDMI OUT
Connections
Display
Disclaimer
The product name and brand name may be registered trademark of
related manufacturers.TM and ® may be omitted on the user manual.
The pictures on the user manual are just for reference, and there may be
some slight difference with the real products.We reserve the rights to
make changes without further notice to a product or system described
herein to improve reliability, function or design.
Specification
HDMI signal HDMI1.4, Full compatible with HDCP1.4
Support resolution 480i@60Hz,480p@60Hz,576i@50Hz,576p@50Hz,720p@50
/60Hz,1080i@50/60Hz,1080p@50/60Hz,4Kx2K 25/30Hz@
Inputs
4 HDMI
Outputs 4 HDMI
Working temperature 060℃～ ℃
Items
Power supply
Power consumption
Product dimension
Color
DC12V/2A
Black
Weight
Support audio format
YUV
Transmission rate
HDMI port
Video signal
DDC signal
Video bandwidth
RS232 RS232 serial control
DTS-HD/Dolby-true HD/LPCM7.1/DTS/Dolby-AC3/DSD
4:2:2
10.2Gbps
0.5~ 1.5Vp-p(TM DS)
5Vp-p(TTL)
340MHZ
Type A 19 pin, female
Specification
18W(Max)
400(L)x172(W)x23(H)MM
1.65Kg

Installation Requirement
1. HDMI source device (DVD, PS3, Set top box, PC etc)
2. HDMI display device like SDTV, HDTV, and projector with
HDMI port.
Matrix Switch unit ×1pcs User manual ×1pcs
Package contents
Remote Controller ×1pcs
DC12V2A powe r ada pte r ×1pcs
Important safety notice
Thank you for purchasing this product. For optimum performance and
safety, please read the instructions carefully and keep the manual for
future reference.
Introduction
This product is a 4×4 H DMI HD Matrix Switch, with 4 HDMI inputs and
4 HDMI outputs. 4 HDMI inputs accommodate the simultaneous
connection up to 4 high definition video sources, such as satellite
systems and Blu-ray players. 4 HDMI outputs send the high definition
audio/video signals to 4 HDTV displays. This Matrix Switch supports
IR remote control and button control for switching inputs and outputs.
This product is perfect for security system, digital monitoring system,
school education system, exhibition center, multimedia conference,
command system etc.
Panel description
Front Panel
Back Panel
1
Power connector(DC12V)
3
HDMI input port
2
HDMI output port
Remote Controller
This remote controller is just used for inputs
or outputs switching/selection.
1. Support HDMI signal input and HDMI signal output.44
2. Support up to ultra HD resolution 4K×2 K@30Hz.
3. Transmission data rate up to 10.2Gbps.
4. Support IR remote control.
5. Support RS232 control.
6. Support button control for switching inputs/outputs.
7. Pure hardware design, plug and play.
Features
4
Switch:To choose input channel
3
2Input Select indicator
IR Receiving window
1
9 Support YUV4:2:2..
8. Support3D.
Please read below safety instructions carefully before installation
and operation:
Please pay attention to all the warnings and hints on this device.
*
Do not expose this unit to rain, moisture and liquid. *
Do not put any stuff into the device. *
Do not repaire the device or open the enclosure without professional *
person guidence to avoid electronic shock.
Make sure good ventilation openings to avoid product overheating
*
damage.
* Turn off power and make sure environment is safe before installation.
avoid
* Do not plug-in/out the connection cables when it is in using to
cables damage.
* Use DC12V only. Make sure the specification matched if using 3rd par ty
DC adapters.
Wall-mount kit x2pcs
IR
RS232 serial port cap ×1pcs
1
2
3
1
3
2
RS232 serial port
4