I-GO POWER SMART WALL User manual
Instant On Button
For Green Outlets
Green
Indicator
Surge
Protection
Indicator
iGo
Green
Outlets
Always On
Outlets
Getting Started
Troubleshooting
Before contacting customer support, here are some common
resolutions to problems:
• Devices not getting power?Try pressing the Instant On button.
• Devices not going into Green Mode?Try optimizing your Power
Smart Wall. See section titled,“OptimizingYour Setup”.
• Device keeps turning off?Try optimizing your Power Smart
Wall. See section titled,“OptimizingYour Setup.
• If circuit breaker is tripped, press the Reset button on the
backside of Power SmartWall.
• Check to ensure connection to power source is secure and
that there is power at the source.
• Check the connections to the device to ensure they have not
come loose.
Product Support
We are committed to providing our customers with first-class
customer service and product support. For assistance, email
Warranty
We warranty all iGo branded products against defects in material
and workmanship for two (2) years from the original date of
purchase. Please see enclosed Safety and Warranty information
sheet for details.
Product Registration
Receive one additional year of warranty coverage plus special
member-only offers when you register your product at
www.iGo.com/register. Registration helps us serve you better;
Failure to register does not diminish your warranty rights.
Questions?
or
call 1-800-474-7593
Contents
• Power Smart Wall
Dimensions
3.54 x 5.19 x 2.92''
(90 x 130 x 74 mm)
Specifications
Input 108-132 VAC; 50/60 Hz; 15A MAX
Surge Protection Rating: 1080 joules
Important Notices
This product is intended for indoor use only. Use only in dry
locations. Do not use in tandem with another surge protector.
Do not use with medical equipment.
User Guide
Save Energy.
This product features iGo GreenTM Technology,
which automatically reduces standby power
by up to 85%, conserving resources
and saving money.
Be Powerful. Eliminate Waste.
Using one iGo charger with power tips
instead of multiple chargers saves you
money and produces less waste.
Visit iGoGreen.com for more information
iGo greenTM
What is Vampire Power?
Just about everything plugged into your home and office sucks
power from the wall, even when they’re turned off. This is called
standby power, orVAMPIRE POWER. Even devices meeting Energy
Star guidelines suck Vampire Power.
The only true way to eliminateVampire Power is to either unplug
all your chargers or manually turn off your power strips…until
now! Power products with iGo GreenTechnology shut off when
they’re not needed and provide full power when needed,
automatically. Only iGo Green power products drive a stake
through the heart of Vampire Power without you ever having to
do a thing.
V
A
M
P
I
R
E
P
O
W
E
R
E
L
I
M
I
N
A
T
E
S
i
G
o
G
r
e
e
n
T
e
c
h
n
o
l
o
g
y
TM
P/N: 8040474-01
If you need immediate power, press the Instant On button
once to wake up the Green outlets.
1.
4. 5.
2. 3.
Plug your Green Recommended devices into the Power
Smart Wall’s Green outlets.
Green Recommended Devices
Laptop chargers
Desktop computers
LCD monitors
Local printers
Consumer electronics chargers
(for mobile phones, Bluetooth headsets,
digital cameras, MP3 players,
GPS units, etc.)
Te l e v i s i o n s
Home audio systems
Game consoles
Battery chargers
DVD players
CD players
Electric toothbrushes
Electric razors
Plug your other devices into the Power Smart Wall’s
Always On outlets.
Always On Recommended Devices
Network Printers
Fax machines
Te l e p h o n e s
DVRs
Devices with clocks
Devices with a physical power
switch (e.g. lamps, fans, etc .)
CRT computer monitors
Vacuum cleaners
Devices with heating elements
(e.g. coffee makers, hairdryers,
toasters, space heaters , etc.)
Aquarium heaters or pumps
Any device that could cause
injury or damage
(e.g.power saws, lawn mowers, etc.)
When devices are off, disconnected or in standby,
the Power SmartWall enters “Green Mode”
and will shut the Green outlets off.
When in Green Mode, the Green Indicator
lights will flash slowly.
Every 30 minutes the Power SmartWall
checks to see if your devices need power.
If your devices need power, the
Green outlets will provide it.
12
6
93
When your devices are turned off or in standby, press
and hold the Instant On button until the Green Indicator
LED begin flashing rapidly and then release.
When the LED has stopped flashing, your Power Smart
Wall will be set to recognize that your devices are off
or in standby.
NOTE: This process should be performed during initial
setup or anytime you change the devices that are plugged
into the Power SmartWall’s Green Outlet.
Press and hold the Instant On button until the Green
LED starts flashing, and continue to hold for 10-15 seconds
until the LED stops flashing.Your Power Smart Wall is
now restored to its factory settings.
Power SmartWall’s two Green Outlets are managed together. For best results,
plug devices with similar power needs into the Green outlets.
Examples of
High Draw Devices:
Desktop computers
Monitors
Printers
Game consoles
Examples of
Low Draw Devices:
Mobile phones
Bluetooth headsets
Digital cameras
MP3 players NOTE: Unplugging or turning off the main power will
not reset the Power Smart Wall.
Optimize the Power Smart
Wall’s Behavior
Group Similar Devices Together Reset to the Original Factory Settings
If Devices Are Not Going Into Green Mode
Standard SetupOptimizeYour Setup
(optional)
Congratulations on your
purchase of an iGo Power Smart
Wall power management system.
• With your Power SmartWall
you can now eliminate up to
85% of vampire power in your
home, office and home theater.
• The Power Smart Wall makes
it easy for you to conserve
electricity.
Your Power Smart Wall is designed
to work right out of the box,
however you can maximize your
savings with the push of a button.
Just follow these few simple steps
to Optimize Your Setup and start
saving even more.
iGo greenTM
By following these steps the Power Smart
Wall automatically senses the power needs
of plugged in devices providing power
when they need it and shutting down when
they don’t.
