I-GO WALL 85 User manual

wall85
www.iGo.com
Specifications
AC input: 100-230 VAC; 2A; 50/60 Hz
DC output to notebook: Up to 70W continuous; 84W peak*
Unit dimensions: 4.05 x 2.07 x 1.27”
(103 x 52.5 x 32.1mm)
Unit weight: 6.9oz (195.61g)
Cord lengths: AC input-3.0’ (0.91m);
DC output-6.0’ (1.83m)
* Peak output power is defined as the maximum achie able wattage,
sustained for ten seconds or less, under the following specific conditions:
• AC input: 120 VAC minimum
• DC output: 18 VDC
This equipment has been designed for connection to TN
and IT power systems.
Safety Features
Over-voltage protection
Over-current limit
Over-temperature protection
Short circuit protection
Before installing, please read this important
safety information. Proper care of your
adapter will ensure its optimal performance.
1. Never pull on the adapter cords. Always hold the plug when
inserting or removing it.
2. Select the correct tip for your notebook by reviewing the
attached tip compatibility hang tag or going to
www.iGo.com – using the wrong tip may damage your
computer or cause it to malfunction.
3. Unplug iGo wall85 from the power outlet each time you
attach a new tip to the cable.
4. Keep the adapter away from heat sources (such as electric
heaters) and avoid direct sunlight exposure.
5. For indoor use only. Keep the adapter free of dust and
moisture, and avoid exposure to corrosive chemicals (such
as cleaning fluids).
6. Do not drop the adapter or subject it to undue shock.
7. Do not place anything on top of the adapter while in use.
8. Turn off the computer and unplug the adapter if you smell
something burning or if the adapter becomes overly hot.
9. Do not attempt to disassemble the adapter. It has no
serviceable or replaceable parts inside.Voltage in the
adapter can cause injury. If the adapter malfunctions,
immediately discontinue use and contact iGo Product
Support.
10. Always use the appropriate cables and connectors supplied
with your adapter as shown in this User Guide. Use of
cables, connectors or other accessories not supplied with
your product may result in injury or damage to your device.
Issue Pro a le Cause(s) Possi le Solution(s)
Notebook is not charging No input or output power Check plug connector
Check cable connections
Check outlet circuit breaker
or fuse
ED does not light up No electricity to unit See solutions “Notebook is
not charging”
ED does not light but unit ight burned out Contact iGo customer service
appears to power devices (see contact information on
the back of this guide)
Notebook model not listed on Compatibility is always See www.iGo.com for current
enclosed compatibility chart being updated compatibility information
Device is not charging when Tip not installed on Install tip on Notebook on
iGo dualpower is configured Notebook Input Cord Input Cord
User Guide
iGo Tip Technology
iGo power products deliver the precise amount of power to
each device through the use of interchangeable tips. Using iGo
power products with patented tip technology eliminates
concern about the correct amount of power for your device
or trying to select it yourself as you do with other products—
we do it for you! The attached compatibility hang tag will help
you determine which tip you need for your notebook. Simply
attach the correct tip and get powered up and connectedTM.
If your notebook tip is not included in this package, visit
www.iGo.com to locate additional tips for purchase.
WARNING – Using the wrong tip may damage your device
or cause it to malfunction.
Power Your Mo ile Phones,
Smartphones/PDAs, MP3 Players,
Digital Cameras and more...
So, you would like to power/charge an additional mobile
electronic (ME) device? Great, iGo wall85 does that too.All
you need is the included iGo dualpower accessory and the
appropriate tip to power/charge your notebook and a ME
device at the same time (additional tips sold separately).
Canada Compliance
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numériqué de la classe B est conformé à la norme
NMB-003 du Canada
Environmental Requirements
Ambient operating temperature is -5ºC to 40ºC
Storage temperature is -20ºC to 85ºC
Certifications
Product Support
We are committed to providing our customers with first-class
customer service and product support.You can receive help in
avariety of ways:
Sales/Customer Service: 1-888-205-0093
T
echnical Support: 1-800-474-7593
Web: www.iGo.com
Product Registration
Thank you for purchasing an iGo mobile solution. Help us serve
you better by taking a moment to register your product at
www.iGo.com/registration. By registering, you are eligible for
benefits including 90 days of free tech support, automatic
notification of product updates and other special promotions.
Warranty
2-year limited warranty
Package Contents
iGo notebook power adapter
iGo dualpower accessory
Auto charging plug
Wall outlet cord (AC)
Notebook input cord
Notebook tips (See attached hang tag for corresponding models and tips)
Carrying case
User Guide
Compatibility hang tag
Trou leshooting
©2002-2006 Mobility Electronics, Inc. Mobility Electronics, iGo and iGo dualpower are
registered trademarks and powered up and connected is a trademark of Mobility
Electronics, Inc.All other brand names and logos are trademarks or registered
trademarks of their respective owners. Specifications are subject to change without
notice. Protected by one or more of the following patents: 5,347,211, 6,064,177,
6,700,808, 6,643,158, 6,650,560, 6,751,109, 6,775,163 6,791,853, 6,920,056, 6,937,490
and 6,976,885. Other United States and foreign patents pending. Made in China.
P/N 8040361-01 Rev. A.
Mo ility Electronics, Inc.
17800 North Perimeter Drive, Ste. 200, Scottsdale, AZ 85255 USA
Tel: [phone]; Fax: [phone]
Congratulations on your iGo®power purchase!
Universally compatible with today’s popular brands, iGo wall85
allows you to power/charge a notebook computer from any
standard AC power source.With the included iGo dualpower®
accessory, you can simultaneously power/charge a notebook
computer and a second mobile electronic device such as a
mobile phone, smartphone/PDA, MP3 player, digital camera and
more (additional iGo power tips sold separately).Also, use the
iGo dualpower accessory and included auto charging plug as a
standard car charger for your gadgets. No other adapters are as
powerful or as versatile as the iGo line of power products.
How to Use This
iGo Wall Power Adapter
Standard Wall Outlet: Plug the wall outlet cord into
any standard wall outlet. Once connected, your battery will
automatically charge regardless of whether your electronic
device is turned on or off. Note:We recommend that you use
iGo wall85 only with your device’s batteries that meet or
exceed the original manufacturer specifications. CAUTION:
ike the power adapter that came with your electronic device,
this iGo adapter may get warm to the touch during use.This is
normal.Avoid placing your iGo adapter in direct sunlight or
next to heat sensitive materials.
FCC Compliance
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.These limits are designed to provide reasonable protection
against harmful interference in a residential installation.This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in
aparticular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna
•Increase the separation between the equipment and receiver
•Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
•Consult the dealer or an experienced radio/TV technician for
help
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
FCC Compliance for iGo dualpower®Accessory
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
wall85UG.qxd:Layout 1 2/14/07 8:45 AM Page 1

Notebook Input Cord
Connection Port
Wall outlet: Use as shown.
1. Connect the correct notebook tip to
the notebook input cord.
2. Insert the notebook input cord into
the iGo wall85 body.
3. Insert the wall outlet cord into the
iGo wall85 body.
5. Plug the notebook input cord
into the notebook.
4. Plug into the appropriate socket.The
ED on the adapter will illuminate, indicating that power is available. If the ED is not lit, be sure to check all
connections. Check TroubleShooting for additional information.
Quick Connect Guide
Attention! Unplug iGo wall85 from the
power outlet each time you attached a new tip to the cable.
Warning: Choosing the wrong tip may
damage your device or cause it to
malfunction.
Tip Selection:
Make sure you have selected the right tip for the device you want to
charge by checking the compatibility
on the attached compatibility hang tag or online at www.iGo.com.
iGo dualpower®
accessory
(power tips sold
separately)
Notebook tip
wall85
Tech note: When using iGo dualpower with this iGo adapter, the maximum
power output is shared between both devices.
If a device attached to iGo dualpower is not charging properly,
it may need more charging power than can be delivered at that
particular time. When this happens, the adapter will shutdown ( ED
will turn off), and we recommend charging each device separately.
Simultaneously power/charge a note ook
computer and a gadget y using the
included iGo dualpower®accessory and tips
(iGo power tips sold separately).
When charging both your notebook and your gadget, plug
dualpower into the connection port on the Notebook Input Cord.
Auto charging plug lets you charge your
gadgets in the car.
Simply plug the iGo dualpower accessory with appropriate
tip into the auto charging plug and use it in your car’s
power outlet.
A/W P/N: 8330361-01
Rev:A Material 80g art paper
Auto charging plug
wall85UG.qxd:Layout 1 2/14/07 8:45 AM Page 2