I-O DATA HDC-UXW Series User manual

●ExampleforWindowsXP
●ExampleforWindows2000
B-MANU200694-01
HDC-UXWSeries
SetupGuideforWindows
IfyouconnectthedrivetothecomputerwitheSATAcable
IfyouconnectthedrivetothecomputerwithUSBcable
IfyouhaveconnectedthedrivetothecomputerwitheSATAcableIfyouhaveconnectedthedrivetothecomputerwithUSBcable
Connecttothecomputer
1
Confirmation
2
Confirmthattheiconfortheharddiskhasbeenaddedin[MyComputer].
Clickontheiconofthisdrive.
Ifmultipleremovabledevicesareconnected,please
makejudgmentaccordingtothemessageofdrive.
2
Confirmthemessage(clickon[OK]).
3
Removethedrive.
4
Clickonthe[RemovableTool]
inTaskTray.
1
Clickonthe[SATAUnplug]iconinTaskTray.
1
Confirmthemessage.
3
Removethedrive.
4
1
2
●NoticetheDirectionofConnector
Thedirectionofaconnectorforconnectionisfixed.
In case of feeling difficult to make connection, never
force to do it, please make sure the direction of the
connector. If you intend to force to make connection
withawrongdirection,thecableorportshallpossibly
bedamaged.
●IfNoIconfortheDriveshown
■Pleasemakesuretheconnectionofthedrive.
■PleaseconnecttoanotherUSBport.
IfthedriveisconnectedtoUSBhub,pleaseconnect
tocomputersUSBport.
■Pleaseclickon[View]→[Refresh]in[MyComputer.]
Incaseof
WindowsXP
Incaseof
Windows2000/Me/98
Theseareicons
ThemessagedisplayedinthescreenshallbedifferentbasedondifferentversionsofWindows.
However,theoperationprocedureissame,pleaseproceedasusual.
【Remove】
Click
Click
TheMessage[Thedevicexxxxxxxxxxxxcannotbestopped・・・・]IsDisplayed.
ClickingontheSATAUnplugIcon,StilltheDriveCannotBeDisplayed.
Closeallthesoftwareyouareusing,andproceedtoremovethedrive.
The SATAUnplug does not support the SATA Host Controller of the computer. Please turn off the power
supplyofthecomputerandproceedtoremovethedrive.
WhenYouMeetFollowingCases…
ItisnecessarytoinstallthedriveUnplug
Utilitytoremovethedriveifthepowersupply
ofthecomputerison.
※IfyouhavenotinstalledthedriveUnplugUtility,oroperateina
non-supportenvironment,pleaseturnoffthepowersupplyof
thecomputerandremovethedrive.
NoticeforUseoftheDrive
●Whenremovingacable,pleasedonotholdthecableportion,butholdtheconnector.
●Basedonthecombinationwithcomputer,sometimesyoumaynotbeallowed
tousepower-savingfunctionssuchasstandby,rest,sleep,suspend,andresume.
●Pleasedonotinstallapplicationinthedriveexceptthatthedriveisusedasabootabledrive.
●PleasenoticethefollowingwhenconnectingwithUSBandusingotherUSBdevices:
●TheOScannotbebootedfromthedrivewhenusingUSBcable.
●BecauseWindowsandMacOS,exceptMacOSX10.4,havedifferentformattings,youcannot
usethedriveunderbothoftheseoperatingsystemsatthesametime.
Becauseoftheprogramsexecutedduringthestart-upofOSnotbeingfoundandotherreasons,youmaynotusesomesoftware
suchasword-processingsoftwareandgamesoftwarenormally.
■Datatransferspeedofthedrivemaybecomeslower.
■IfbeingconnectedtoUSBhub,thedrivemaynotbeuseable.Insuchcase,pleaseconnectthedrivetocomputer'sUSBport.
※Ifthesamemessageisdisplayedagain,pleaseturnoffthepowersupplyofthecomputerandremovethedrive.
Clickonthedisplayedmessage
[Safelyremove……drive(ｘ：)].
2
Click
※ThedisplayedmessagedependsontheOSyouareusing.
AboutFormatOperationoftheDrive
ThisdriveisalreadyformattedinfactoryasonepartitionandFAT32touseWindows.Besides,thedrive
canalsobeusedafterreinitializedwithNTFSformattingunderWindowsXP/2000.
However,ifusingthedriveunderMacOSX,youneedtoinitialize.Fordetails,pleaserefertotheSetup
GuideforMacOS.
NTFSFormat
■AdvantageofNTFSformatting
・SuitabletoWindowsXP/2000andHardDiskcanbeusedeffectively.
・Suitabletosavelargefilesize.InFAT32,themaximumsizeofafilecanonly
belessthan4GB.
・Thereisnolimitationtothenumberofsavedfiles.InFAT32,thenumberoffiles
inafolderislimited.
■NoticeforNTFSformatting
・OnceinitializedwithNTFSformatting,thedriveshallnotbeusedunderMacOSX.
FollowingisanexampleofconnectingeSATAbrackettotheSATAportinsidethecomputer.If
SATAportisavailableinthecomputer,youdonotneedtohaveaneSATAbracket.
（PleaseremovethedrivewhenyouinstalltheUnplugUtility.）
Installation
InserttheSupportSoftwareCDintoCD-ROMdrive.
TheMenushallbedisplayedautomatically.
1
Clickon[Install].
TheinstallationoftheUtilityshallbestarted.Pleasefollowtheinstructionsonthescreen.
2
YoucanuseSATAUnplugwhenyouremovethedriveconnectedwitheSATAcabletothecomputer.
AttachedSupportSoftwareforWindows
YoucanmakeinstallationfromtheMenuofSupportSoftware.
※PleaselogonasthecomputeradministratortoinstallifyouuseWindowsXP/2000.
HardDisk
FAT32Formatter
Itisasoftwarewhichresetsthedriveformattofactorydefault(onepartition,FAT32).
※PleaselogonasthecomputeradministratortouseHardDiskFAT32Formatter.
※ThedrivemustbeconnectedtothecomputerwithUSBcablewhenyouuseHardDiskFAT32Formatter.
UnplugUtility
SATAUnplug
SupportWindowsXP/2000Only
Itisasoftwarewhichenablesthedrivetoremovefromthecomputerwhilethepower
supplyofthecomputerisonandthedriveisconnectedtothecomputerwitheSATA
cable.
※IncaseeSATAbrocketisinconnected,pleaseusethissoftwareunderAHCImodeofIntel910,915,925,945,
955,965and975chipsets.
SoftwareName Features
HowtoreadOnlineManual
①InserttheSupportSoftwareCDintoCD-ROMdrive.
②Clickonthedisplayed[OnlineManual]button.
ACAdaptor
PowerCable
２
３
６
７
４１
InstallthedriveUnplugUtility.
Fortheinstallation,pleasereferto[3Installation].
Disconnectthepowersupplyofthecomputer,andconnecteSATA
bracketasshownin andinthefigure.
３Connectpowersupplyofthecomputer,
andmakeconnectionfrom to as
showninthefigure.
※ThePOWER/ACCESSlampofthisdriveshallbe
bluewhilebeingon.
1Connectthepowersupplyofthecomputer
asshowninthefigure.
※ThePOWER/ACCESSlampofthisdriveshallbeblue
whilebeingon.
5
１2
37
ACAdaptor
PowerCable
USBCable
ConnecttoUSBPort
1
4
5
2
3
Notice
Notice
Reference
３InstalltheUnplugUtilitySATAUnplug.
(NOTE)Powercableisvariedbasedonthecountry.
(NOTE)Powercableisvariedbasedonthecountry.
eSATACable

HDC-UXWSeries
SetupGuideforMacOS
1
Connecttothecomputer
１
2
3
IfyouconnectthedrivetothecomputerwithUSBcable
Uncheck[FileExchange](remove[×]).
2
Clickon[Restart]button.
3
Open[ExtensionsManager].
Clickon→[ControlPanels]→[ExtensionsManager].
1
IfyouconnectthedrivetothecomputerwitheSATAcable
AboutOnlineManual
UseunderMacOS10.4withFAT32
Thereistheinformationsuchas[Troubleshooting]init.
NoticeforUseoftheDrive
●Whenremovingacable,pleasedonotholdthecableportion,butholdtheconnector.
●Basedonthecombinationwithcomputer,sometimesyoumaynotbeallowed
tousepower-savingfunctionssuchasstandby,rest,sleep,suspend,andresume.
●Pleasedonotinstallappricationsoftwaretothedrive.
●PleasenoticethefollowingincaseofusingotherUSBdevices.
●TheOScannotbebootedfromthedrive.
●BecauseWindowsandMacOS,exceptMacOSX10.4havedifferentformattings,youcannot
usethedriveunderbothoftheseoperatingsystemsatthesametime.
●IncaseofcopyingfilesunderMacOSX,pleasenoticethedifferencebetweenfilesystems.
●Itisrecommendedtousethedrivewithonepartition.
Becauseoftheprogramsexecutedduringthestart-upofOSnotbeingfoundandotherreasons,youmaynotusesomesoftware
suchasword-processingsoftwareandgamesoftwarenormally.
■Datatransferspeedofthedrivemaybecomeslower.
■IfbeingconnectedtoUSBhub,thedrivemaynotbeuseable.Insuchcase,pleaseconnectthedriveto
computer'sUSBport.
■ThemaximunsizeofthefileswithFAT32islessthan4GB.
■Ittakessometimetomountthedrive.
■IncaseofusingthedriveundertheMacOSotherthanMacOSX10.4,youcannotusethedrivewithFAT32.
■IncaseofusingthedriveonlyunderMacOS,itisrecommendedtousethedrivewithMacOSExtendedformatting.
Fortheformattingprocedure,pleaserefertoOnlineManualintheSupportSoftware:[InitializationunderMacOSX]-[OSX10.4].
Iffilesystemsinthesourceandinthedestinationincopyoperationaredifferent,errormayoccur.
Insuchcase,pleasechangethefilename(text,numberofletters).Itisrecommendedtousethedriveafterhaving
initializingitwithMacOSExtened(Journaled)formatting.
DragthevolumeforthedriveintotheTrash.
1
InserttheSupportSoftware,thecontentsofSupportSoftwareshallbeautomaticallydisplayed.
※Ifitbeingnotdisplayed,pleasedoubleclickon[HDCUXWxxx]toopenit.
1
Pleaseopen[manual.htm].
2
Removethedrive.
2
【Remove】
Discardthevolume
（MacOSX） （MacOS9）
●Youcanusethedrivedirectlywithitsfactorydefaultfarmatting(FAT32),butneed
tonoticethefollowingmatters:
Sometimesfollowingscreenmaybedisplayedafterthe
initialization.Pleaseclickon[Continue]button.
A
fterthescreenhasbeendisplayedforawhile,itshallsoondisappear.
InthiscasepleaseonceremovetheUSBcablefromthecomputerand
theninsertitagain.
※ThescreenisanexampleforMacOSX10.3
Initialization
Confirmation
MacOSX10.1〜10.3
Selectthisdrive(I-ODATAHDC-UXMedia).
2
1
MacOS9.1〜9.2.2
Confirmthattheiconfortheharddiskhasbeenadded.
Typethenameforthedrivein[Name].
1
Set[Format]as[MacOSExtended].
2
Clickon[Initialize]button.
Thenfollowtheinstructionsonthescreen.
3
Check[FileExchange](markedwith[×]).
4
Clickon[Partition]tab.
3
Settingsofinitialization.
■volumescheme:1partition
■Format:MacOSExtended(Journaled)
4
Clickon[Partition(OK)]button.
5
Clickon[Partition]button.
Initializationisstarted.
6
TheDriveIsNotDisplayed
●Itmaytakesometimetodisplaythedrive.
Pleasewaitforawhile.
MacOSX MacOS9
（Incaseofconnecting
witheSATAcable）
In case that the icon is not be displayed and
the lamp is not on, please try to pull out the
USB cable connected to the computer and
insertitintothecomputeragain.
WhenYouMeetFollowingCases…
Startup[DiskUtility].
Open[StartupVolume]→[Applications]→[Utilities]→[DiskUtility].
MacOSX10.4
Thedriveisalreadyformattedinfactory(onepartition,FAT32).
Itcanbeuseddirectly,butifitisonlyusedunderMacOSX,wesuggestmakinginitialization(formatting)
forit.
●Ifyoumakeinitializationforthedrive,makeinitializationwithMacOSExtended(Journaled).
Formoredetailedprocedure,pleaserefertoOnlineManual:[InitializationunderMacOSX]-[OSX10.4].
●Ifyouusedrivewithfactorydefaultformatting(FAT32),
pleaseread[UseunderMacOS10.4withFAT32].
Copyright(C)2007I-ODATADEVICE,INC.AllRightsReserved.
Utilizing100%post-consumer
recycledpaperpulp
ACAdaptor
PowerCable
●NoticetheDirectionofConnector
The direction of a connector for connection is fixed. In case of feeling
difficulttomakeconnection,neverforcetodoit,pleasemake sure the
direction of the connector. If you intend to force to make connection
withawrongdirection,thecableorportshallpossiblybedamaged.
Connectthepowersupplyofthe
computer,andconnectthedriveto
computer'sUSBportasshowninthe
figure.
ThePOWER/ACCESSlampofthisdriveshallbeblue
whilebeingon.
3ForselectionofthisdrivefromDiskUtility,clickon[File]-[MountVolume].
6
1
2
DisconnectthepowersupplyofthecomputerandconnecttheeSATAbracketasshownin
andinthefigure.
Connectthepowersupplyofthecomputer,andmakeconnectionasshowninthefigure.
※ThePOWER/ACCESSlampofthisdriveshallbebluewhilebeingon.
1
4
5
2
3
1
4
5
2
6
7
3
12
Notice
Reference
FirstStepforMacOS9
Click
Reference
Theseareicons
Referto[FirstStepforMacOS9]
eSATACable
ACAdaptor
Connectto
USBPort
PowerCable
USBCable
(NOTE)Powercableisvariedbasedonthecountry.
(NOTE)Powercableisvariedbasedonthecountry.