
INTRODUCTION
2
IB897 User’s Manual
Specifications
Intel® AtomTM QC E3845 /2MB cache/1.91GHz (IB897-I45&I45P)
Intel® AtomTM DC E3827 /1MB cache/1.75 GHz (IB897-I27&I27P)
Intel® AtomTM SC E3815 /512KB cache/1.46 GHz (IB897-I15& I15P)
Package = FCBGA1170, 25mmx27mm, 22nm,Tj= -40゚C to +110゚C
Intel® AtomTM SoC integrated memory controller
Support DDR3L (1.35V only), Non-ECC memory only
2 x DDR3 SO-DIMM socket [IB897-I45_P/IB897-I27_P], 8GB max.
1 x DDR3 SO-DIMM socket [IB897-I15_P], 4GB max.
Intel® Gen7 w/4 EUs graphics engines
DisplayPort x 1 [Support to 2560x1200@60Hz]
CRT x 1 via pin header [Support to 1920x1080@60Hz]
24-bit dual channel via NXP PTN3460 thru eDP
(Support to1920x1200 @ 60 Hz)
Intel® I210IT PCIe Gigabit LAN x 2
Intel® AtomTM SoC built-in USB host controller
Support USB 2.0 x 4 ports; USB 3.0 x 1 port,
extra USB 2.0 x4 ports (Thru SMSC HUB USB2514)
Intel® AtomTM SoC built-in SATA II controller, supports 2 ports
Intel®AtomTM SoC built-in HD Audio controller + Realtek ALC269QHD
Codec w/class-D speaker amplifier (2.3W per channel @ 5V power
supply) [7mm x 7mm @ 48-QFN]; support 2-channel audio out + amp
Nuvoton NCT5523D [64-pin LQFP, 7x7x1.4mm]
-COM #1 (RS232/422/485) [EXAR SP339EER1 x 1 for jumper-less]
-COM #2 (RS-232 only)
[Hardware Monitor]: 2x Thermal inputs; 2x Voltage monitoring
Mini PCI-e socket x2(1xFull-sized+1xHalf-sized,)
**Full length MiniPCIe (1x) support mSATA**
DB9 for COM1, DisplayPort, RJ45 x 2 for LAN 1 & 2
USB 2.0 vertical connector x 1, USB 3.0 vertical connector x 1
LED indicators (red+green) x1 for power and HDD status & power
button x 1(IB897-I45/I27/I15)
4-pin header for LED indicator & 2-pin header for power button via
cable (IB897-I45P/I27P/I15P)
2x8 pin header for CRT; 2x4 pin header for 2x USB 2.0
DF20 socket connector x2 for 24-bit dual channel LVDS
4-pin box header for backlight/brightness control (PWM)
2x6 pin box header for Audio, 4-pin header for speaker
2x5 pin box header for COM2
2x5 pin headers for LPC (80-port card debugging purpose)
Mini PCI-e(1x) connector x2, 5 pins box header for smart battery
SATA connector x 2for SATA device
4-pins power connector (JST type, for SATA device)
2-pins connector for power input, Micro SD slot (type 3.3V)
Yes (256 segments, 0, 1, 2…255 sec/min)
9V ~ 30V DC-in thru onboard 2-pin connector
iSMART 2.0 [Auto-scheduler / Power resume]
Windows 8.1 / Embedded; Windows 7 / Embedded, Linux
Yes / Yes / Yes / Class B